From: guodong.xu@linaro.org (Guodong Xu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 14/16] arm64: dts: hikey: Add hi655x pmic dts node
Date: Sat, 2 Apr 2016 17:29:41 +0800 [thread overview]
Message-ID: <1459589383-16914-15-git-send-email-guodong.xu@linaro.org> (raw)
In-Reply-To: <1459589383-16914-1-git-send-email-guodong.xu@linaro.org>
From: Chen Feng <puck.chen@hisilicon.com>
Add the mfd hi655x dts node and regulator support on
hi6220 platform.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Guodong Xu <guodong.xu@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 28bc646..a6dffa8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -6,6 +6,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "hi6220.dtsi"
#include "hikey-gpio.dtsi"
@@ -104,6 +105,92 @@
default-state = "off";
};
};
+
+ pmic: pmic at f8000000 {
+ compatible = "hisilicon,hi655x-pmic";
+ reg = <0x0 0xf8000000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ regulators {
+ ldo2: LDO2 at a21 {
+ regulator-name = "LDO2_2V8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo7: LDO7 at a26 {
+ regulator-name = "LDO7_SDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo10: LDO10 at a29 {
+ regulator-name = "LDO10_2V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo13: LDO13 at a32 {
+ regulator-name = "LDO13_1V8";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo14: LDO14 at a33 {
+ regulator-name = "LDO14_2V8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo15: LDO15 at a34 {
+ regulator-name = "LDO15_1V8";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo17: LDO17 at a36 {
+ regulator-name = "LDO17_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo19: LDO19 at a38 {
+ regulator-name = "LDO19_3V0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo21: LDO21 at a40 {
+ regulator-name = "LDO21_1V8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo22: LDO22 at a41 {
+ regulator-name = "LDO22_1V2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+ };
+ };
};
&uart2 {
--
1.9.1
next prev parent reply other threads:[~2016-04-02 9:29 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-02 9:29 [PATCH v2 00/16] DTS for hi6220 and HiKey Guodong Xu
2016-04-02 9:29 ` [PATCH v2 01/16] arm64: dts: Reserve memory regions for hi6220 Guodong Xu
2016-04-02 9:29 ` [PATCH v2 02/16] arm64: dts: add sp804 timer node for Hi6220 Guodong Xu
2016-04-03 19:23 ` Linus Walleij
2016-04-04 1:43 ` Leo Yan
2016-04-04 11:21 ` Linus Walleij
2016-04-04 13:42 ` Leo Yan
2016-04-04 13:53 ` Linus Walleij
2016-04-04 14:03 ` Leo Yan
2016-04-04 5:16 ` Rob Herring
2016-04-02 9:29 ` [PATCH v2 03/16] arm64: dts: enable idle states " Guodong Xu
2016-04-02 9:29 ` [PATCH v2 04/16] arm64: dts: Add Hi6220 gpio configuration nodes Guodong Xu
2016-04-03 19:28 ` Linus Walleij
2016-04-12 9:18 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 05/16] arm64: dts: add Hi6220 pinctrl " Guodong Xu
2016-04-03 19:31 ` Linus Walleij
2016-04-04 22:54 ` Tony Lindgren
2016-04-02 9:29 ` [PATCH v2 06/16] arm64: dts: add Hi6220 spi " Guodong Xu
2016-04-04 5:16 ` Rob Herring
2016-04-12 9:40 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 07/16] arm64: dts: add all hi6220 i2c nodes Guodong Xu
2016-04-02 9:29 ` [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards Guodong Xu
2016-04-04 5:16 ` Rob Herring
2016-04-02 9:29 ` [PATCH v2 09/16] arm64: dts: add hi6220 usb node Guodong Xu
2016-04-02 9:29 ` [PATCH v2 10/16] arm64: dts: add mailbox node for Hi6220 Guodong Xu
2016-04-02 9:29 ` [PATCH v2 11/16] arm64: dts: add Hi6220's stub clock node Guodong Xu
2016-04-02 9:29 ` [PATCH v2 12/16] arm64: dts: hi6220: add pinctrl for uarts and enable them Guodong Xu
2016-04-02 9:29 ` [PATCH v2 13/16] arm64: dts: add LED nodes for hi6220-hikey Guodong Xu
2016-04-04 5:16 ` Rob Herring
2016-04-02 9:29 ` Guodong Xu [this message]
2016-04-04 5:16 ` [PATCH v2 14/16] arm64: dts: hikey: Add hi655x pmic dts node Rob Herring
2016-04-12 13:14 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 15/16] arm64: dts: add dwmmc nodes for hi6220 Guodong Xu
2016-04-02 9:29 ` [PATCH v2 16/16] arm64: dts: add wifi nodes support for hi6220-hikey Guodong Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459589383-16914-15-git-send-email-guodong.xu@linaro.org \
--to=guodong.xu@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).