From: guodong.xu@linaro.org (Guodong Xu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/4] arm64: defconfig: Enable devices for Hi6220 and 96boards HiKey
Date: Sat, 2 Apr 2016 19:47:51 +0800 [thread overview]
Message-ID: <1459597674-6834-2-git-send-email-guodong.xu@linaro.org> (raw)
In-Reply-To: <1459597674-6834-1-git-send-email-guodong.xu@linaro.org>
This patch enables a number of devices currently supported by the Hi6220
and 96boards HiKey. These include
a) Hi655x PMIC and regulator
b) Hi6220 I2C, USB, MMC, mailbox, and reset
c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO
v2:
- rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in.
- set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm64/configs/defconfig | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f705051..32b4f2d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -146,6 +146,7 @@ CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_QUP=y
CONFIG_I2C_UNIPHIER_F=y
@@ -154,6 +155,7 @@ CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_GPIO_SYSFS=y
@@ -170,8 +172,10 @@ CONFIG_THERMAL_EMULATION=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_HI655X_PMIC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_S2MPS11=y
@@ -196,6 +200,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
@@ -215,9 +220,11 @@ CONFIG_MMC_SPI=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -244,6 +251,8 @@ CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8916=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_ARM_SMMU=y
+CONFIG_MAILBOX=y
+CONFIG_HI6220_MBOX=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
@@ -252,6 +261,8 @@ CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_HISILICON_IRQ_MBIGEN=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_COMMON_RESET_HI6220=y
+CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
--
1.9.1
next prev parent reply other threads:[~2016-04-02 11:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-02 11:47 [PATCH v3 0/4] Enable configs for 96boards HiKey and general arm64 Guodong Xu
2016-04-02 11:47 ` Guodong Xu [this message]
2016-04-02 11:47 ` [PATCH v3 2/4] arm64: defconfig: add CONFIG_SPI_SPIDEV as module Guodong Xu
2016-04-02 11:47 ` [PATCH v3 3/4] arm64: defconfig: enable several common USB network adapters Guodong Xu
2016-04-02 11:47 ` [PATCH v3 4/4] arm64: defconfig: enable configs for WLAN and TI WL1835 as modules Guodong Xu
2016-04-26 10:08 ` [PATCH v3 0/4] Enable configs for 96boards HiKey and general arm64 Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459597674-6834-2-git-send-email-guodong.xu@linaro.org \
--to=guodong.xu@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).