[PATCH v3 0/4] Enable configs for 96boards HiKey and general arm64

[PATCH v3 0/4] Enable configs for 96boards HiKey and general arm64

[Guodong Xu]

This patch enables a number of devices currently supported by the Hi6220
and 96boards HiKey. These include
a) Hi655x PMIC and regulator
b) Hi6220 I2C, USB, MMC, mailbox, and hisi-reset
c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO
d) WLAN, TI WL1835

Also added general features (built as modules) in arm64:
 - SPIDEV
 - USB network adapters

v3:
 - rebase to next-20160401
 - Enabled configs for WLAN and TI WL1835.

v2:
 - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in.
 - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module
 - Enable general features (as modules) in arm64

Akira Tsukamoto (1):
  arm64: defconfig: enable several common USB network adapters

Guodong Xu (3):
  arm64: defconfig: Enable devices for Hi6220 and 96boards HiKey
  arm64: defconfig: add CONFIG_SPI_SPIDEV as module
  arm64: defconfig: enable configs for WLAN and TI WL1835 as modules

 arch/arm64/configs/defconfig | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

-- 
1.9.1

[PATCH v3 1/4] arm64: defconfig: Enable devices for Hi6220 and 96boards HiKey

[Guodong Xu]

This patch enables a number of devices currently supported by the Hi6220
and 96boards HiKey. These include
a) Hi655x PMIC and regulator
b) Hi6220 I2C, USB, MMC, mailbox, and reset
c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO

v2:
 - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in.
 - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/configs/defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f705051..32b4f2d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -146,6 +146,7 @@ CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_QUP=y
 CONFIG_I2C_UNIPHIER_F=y
@@ -154,6 +155,7 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
 CONFIG_SPMI=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
@@ -170,8 +172,10 @@ CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_HI655X_PMIC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_HI655X=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_S2MPS11=y
@@ -196,6 +200,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -215,9 +220,11 @@ CONFIG_MMC_SPI=y
 CONFIG_MMC_SUNXI=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -244,6 +251,8 @@ CONFIG_COMMON_CLK_QCOM=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_ARM_SMMU=y
+CONFIG_MAILBOX=y
+CONFIG_HI6220_MBOX=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
@@ -252,6 +261,8 @@ CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_HISILICON_IRQ_MBIGEN=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_COMMON_RESET_HI6220=y
+CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_XGENE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-- 
1.9.1

[PATCH v3 2/4] arm64: defconfig: add CONFIG_SPI_SPIDEV as module

[Guodong Xu]

add CONFIG_SPI_SPIDEV as module, for arm64.

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 32b4f2d..e4952c5 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -154,6 +154,7 @@ CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
+CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MSM8916=y
-- 
1.9.1

[PATCH v3 3/4] arm64: defconfig: enable several common USB network adapters

[Guodong Xu]

From: Akira Tsukamoto <akira.tsukamoto@linaro.org>

The arm64 system is likely to be used as a host computer instead of
embedded devices and adding USB-Ethernet dongles to make it behave as
host PC is mandatory.

Changelog:
v2: Changed drivers to be as modules instead of built-in.

Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/configs/defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e4952c5..f31a44f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -117,6 +117,16 @@ CONFIG_RAVB=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
 CONFIG_MICREL_PHY=y
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
-- 
1.9.1

[PATCH v3 4/4] arm64: defconfig: enable configs for WLAN and TI WL1835 as modules

[Guodong Xu]

This patch enables TI WL1835 and builds as module. It also enables
CFG80211, MAC80211, RFKILL and several CRYPTOs which are required
by WLAN.

96boards HiKey uses TI WLAN/BT combo module WL1835MOD.

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/configs/defconfig | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f31a44f..aa1909d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -83,7 +83,10 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_BPF_JIT=y
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_LEDS=y
+CONFIG_RFKILL=m
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -127,7 +130,8 @@ CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
-# CONFIG_WLAN is not set
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SDIO=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_SERIO_SERPORT is not set
-- 
1.9.1

[PATCH v3 0/4] Enable configs for 96boards HiKey and general arm64

[Wei Xu]

Hi Guodong,

On 02/04/2016 12:47, Guodong Xu wrote:
> This patch enables a number of devices currently supported by the Hi6220
> and 96boards HiKey. These include
> a) Hi655x PMIC and regulator
> b) Hi6220 I2C, USB, MMC, mailbox, and hisi-reset
> c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO
> d) WLAN, TI WL1835
> 
> Also added general features (built as modules) in arm64:
>  - SPIDEV
>  - USB network adapters
> 
> v3:
>  - rebase to next-20160401
>  - Enabled configs for WLAN and TI WL1835.

Thanks!
Applied series to the hisilicon soc tree.
And the b) and c) are already in the mainline, so I just kept a) and d) there.

Best Regards,
Wei

> 
> v2:
>  - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in.
>  - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module
>  - Enable general features (as modules) in arm64
> 
> Akira Tsukamoto (1):
>   arm64: defconfig: enable several common USB network adapters
> 
> Guodong Xu (3):
>   arm64: defconfig: Enable devices for Hi6220 and 96boards HiKey
>   arm64: defconfig: add CONFIG_SPI_SPIDEV as module
>   arm64: defconfig: enable configs for WLAN and TI WL1835 as modules
> 
>  arch/arm64/configs/defconfig | 30 ++++++++++++++++++++++++++++--
>  1 file changed, 28 insertions(+), 2 deletions(-)
>