From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] ARM: kirkwood: DT: Remove address from dsa unit name
Date: Sun, 3 Apr 2016 04:03:45 +0200 [thread overview]
Message-ID: <1459649030-21886-4-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1459649030-21886-1-git-send-email-andrew@lunn.ch>
The dsa node does not have a reg property, so remove the address from
the unit name.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-dir665.dts | 2 +-
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 2 +-
arch/arm/boot/dts/kirkwood-rd88f6281-a.dts | 2 +-
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts | 2 +-
arch/arm/boot/dts/kirkwood-rd88f6281.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index 0473fcc260f7..f548363060ea 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -203,7 +203,7 @@
};
};
- dsa at 0 {
+ dsa {
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 6a8f59acb539..26fb610b2af7 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -121,7 +121,7 @@
};
};
- dsa at 0 {
+ dsa {
compatible = "marvell,dsa";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
index f2e08b3b33ea..6f771a99cb02 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
@@ -19,7 +19,7 @@
model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
- dsa at 0 {
+ dsa {
switch at 0 {
reg = <10 0>; /* MDIO address 10, switch 0 in tree */
};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index f4272b64ed7f..1a797381d3d4 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -19,7 +19,7 @@
model = "Marvell RD88f6281 Reference design, with Z0 SoC";
compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
- dsa at 0 {
+ dsa {
switch at 0 {
reg = <0 0>; /* MDIO address 0, switch 0 in tree */
port at 4 {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index d195e884b3b5..5521426d101b 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -63,7 +63,7 @@
};
};
- dsa at 0 {
+ dsa {
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
--
2.7.0
next prev parent reply other threads:[~2016-04-03 2:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-03 2:03 [PATCH 0/8] Various Kirkwood DT warning fixup Andrew Lunn
2016-04-03 2:03 ` [PATCH 1/8] ARM: kirkwood: DT: Remove button address and fixup names Andrew Lunn
2016-04-03 2:03 ` [PATCH 2/8] ARM: kirkwood: DT: Remove node address from leds Andrew Lunn
2016-04-03 2:03 ` Andrew Lunn [this message]
2016-04-03 2:03 ` [PATCH 4/8] ARM: kirkwood: DT: Add address to ethernet-phy unit name Andrew Lunn
2016-04-03 2:03 ` [PATCH 5/8] ARM: kirkwood: DT: Fixup pcie DT warnings Andrew Lunn
2016-04-03 2:03 ` [PATCH 6/8] ARM: kirkwood: DT: Remove address from gpio-i2c unit name Andrew Lunn
2016-04-03 2:03 ` [PATCH 7/8] ARM: kirkwood: DT: Add address to mbus " Andrew Lunn
2016-04-03 2:03 ` [PATCH 8/8] ARM: kirkwood: DT: Add address go regulator " Andrew Lunn
2016-04-03 12:02 ` [PATCH 0/8] Various Kirkwood DT warning fixup Gregory CLEMENT
2016-04-03 12:16 ` Gregory CLEMENT
2016-04-03 14:05 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459649030-21886-4-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).