From mboxrd@z Thu Jan 1 00:00:00 1970 From: appana.durga.rao@xilinx.com (Kedareswara rao Appana) Date: Wed, 6 Apr 2016 21:45:31 +0530 Subject: [PATCH v3 1/5] Documentation: DT: vdma: Rename vdma-chan prefix to dma-chan In-Reply-To: <1459959335-24083-1-git-send-email-appanad@xilinx.com> References: <1459959335-24083-1-git-send-email-appanad@xilinx.com> Message-ID: <1459959335-24083-2-git-send-email-appanad@xilinx.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch renames the vdma-mm2s-channel/vdma-s2mm-channel property with dma-mm2s-channel/dma-s2mm-channel to sync with the driver. Signed-off-by: Kedareswara rao Appana --- Changes for v3: ---> New patch. Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index a86737c..762938f 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -24,8 +24,8 @@ Optional properties: {3}, flush s2mm channel Required child node properties: -- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or - "xlnx,axi-vdma-s2mm-channel". +- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or + "xlnx,axi-dma-s2mm-channel". - interrupts: Should contain per channel VDMA interrupts. - xlnx,datawidth: Should contain the stream data width, take values {32,64...1024}. @@ -48,12 +48,12 @@ axi_vdma_0: axivdma at 40030000 { xlnx,flush-fsync = <0x1>; xlnx,addrwidth = <0x20>; dma-channel at 40030000 { - compatible = "xlnx,axi-vdma-mm2s-channel"; + compatible = "xlnx,axi-dma-mm2s-channel"; interrupts = < 0 54 4 >; xlnx,datawidth = <0x40>; } ; dma-channel at 40030030 { - compatible = "xlnx,axi-vdma-s2mm-channel"; + compatible = "xlnx,axi-dma-s2mm-channel"; interrupts = < 0 53 4 >; xlnx,datawidth = <0x40>; } ; -- 2.1.2