From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/8] clk: mux: Add support for read-only muxes.
Date: Sat, 27 Jul 2013 14:41:05 +0200 [thread overview]
Message-ID: <1460068.oJXN9T0Uhp@flatron> (raw)
In-Reply-To: <1374536965-3545-2-git-send-email-tomasz.figa@gmail.com>
Hi Mike,
On Tuesday 23 of July 2013 01:49:18 Tomasz Figa wrote:
> Some platforms have read-only clock muxes that are preconfigured at
> reset and cannot be changed at runtime. This patch extends mux clock
> driver to allow handling such read-only muxes by adding new
> CLK_MUX_READ_ONLY mux flag.
>
> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
> ---
> drivers/clk/clk-mux.c | 10 +++++++++-
> include/linux/clk-provider.h | 2 ++
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
> index 614444c..92f1a1b 100644
> --- a/drivers/clk/clk-mux.c
> +++ b/drivers/clk/clk-mux.c
> @@ -107,6 +107,11 @@ const struct clk_ops clk_mux_ops = {
> };
> EXPORT_SYMBOL_GPL(clk_mux_ops);
>
> +const struct clk_ops clk_mux_ro_ops = {
> + .get_parent = clk_mux_get_parent,
> +};
> +EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
> +
> struct clk *clk_register_mux_table(struct device *dev, const char
> *name, const char **parent_names, u8 num_parents, unsigned long flags,
> void __iomem *reg, u8 shift, u32 mask,
> @@ -133,7 +138,10 @@ struct clk *clk_register_mux_table(struct device
> *dev, const char *name, }
>
> init.name = name;
> - init.ops = &clk_mux_ops;
> + if (clk_mux_flags & CLK_MUX_READ_ONLY)
> + init.ops = &clk_mux_ro_ops;
> + else
> + init.ops = &clk_mux_ops;
> init.flags = flags | CLK_IS_BASIC;
> init.parent_names = parent_names;
> init.num_parents = num_parents;
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 1ec14a7..9487b96 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -327,8 +327,10 @@ struct clk_mux {
> #define CLK_MUX_INDEX_ONE BIT(0)
> #define CLK_MUX_INDEX_BIT BIT(1)
> #define CLK_MUX_HIWORD_MASK BIT(2)
> +#define CLK_MUX_READ_ONLY BIT(3) /* mux setting cannot be changed */
>
> extern const struct clk_ops clk_mux_ops;
> +extern const struct clk_ops clk_mux_ro_ops;
>
> struct clk *clk_register_mux(struct device *dev, const char *name,
> const char **parent_names, u8 num_parents, unsigned long
flags,
What do you think about this?
Best regards,
Tomasz
next prev parent reply other threads:[~2013-07-27 12:41 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 23:49 [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx Tomasz Figa
2013-07-22 23:49 ` [PATCH v2 1/8] clk: mux: Add support for read-only muxes Tomasz Figa
2013-07-23 11:22 ` Sergei Shtylyov
2013-07-23 11:25 ` Tomasz Figa
2013-07-27 12:41 ` Tomasz Figa [this message]
2013-08-02 21:46 ` Mike Turquette
2013-07-22 23:49 ` [PATCH v2 2/8] clk: samsung: pll: Add support for PLL6552 and PLL6553 Tomasz Figa
2013-07-23 23:52 ` [PATCH v3 " Tomasz Figa
2013-07-28 12:30 ` Mark Brown
2013-07-28 12:38 ` Tomasz Figa
2013-08-02 22:53 ` Mike Turquette
2013-07-22 23:49 ` [PATCH v2 3/8] clk: samsung: Add clock driver for S3C64xx SoCs Tomasz Figa
2013-07-23 23:55 ` [PATCH v3 " Tomasz Figa
2013-07-22 23:49 ` [PATCH v2 4/8] ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros Tomasz Figa
2013-07-22 23:49 ` [PATCH v2 5/8] ARM: s3c64xx: dma: Use clk_prepare_enable/clk_disable_unprepare Tomasz Figa
2013-07-28 12:32 ` Mark Brown
2013-07-22 23:49 ` [PATCH v2 6/8] usb: host: ohci-s3c2410 " Tomasz Figa
2013-07-23 0:15 ` Fabio Estevam
2013-07-23 0:44 ` Tomasz Figa
2013-07-31 18:58 ` Tomasz Figa
2013-07-31 20:44 ` Alan Stern
2013-08-01 7:45 ` Greg KH
2013-07-22 23:49 ` [PATCH v2 7/8] ARM: s3c64xx: Migrate clock handling to Common Clock Framework Tomasz Figa
2013-07-22 23:49 ` [PATCH v2 8/8] ARM: s3c64xx: Remove old clock management code Tomasz Figa
2013-07-24 12:20 ` [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx Kukjin Kim
2013-08-05 17:01 ` Kukjin Kim
2013-08-05 18:06 ` Mike Turquette
2013-08-05 18:13 ` Kukjin Kim
2013-08-05 19:02 ` Mike Turquette
2013-08-05 23:42 ` Tomasz Figa
2013-08-06 19:47 ` Mike Turquette
2013-08-06 22:06 ` Tomasz Figa
2013-08-06 22:11 ` Kukjin Kim
2013-08-06 22:13 ` Tomasz Figa
2013-08-16 10:44 ` Tomasz Figa
2013-08-16 21:02 ` Mike Turquette
2013-08-16 21:15 ` Tomasz Figa
2013-08-17 10:30 ` Kukjin Kim
2013-08-20 0:22 ` Mike Turquette
2013-08-20 7:09 ` Kukjin Kim
2013-08-25 17:19 ` Kukjin Kim
2013-08-21 0:33 ` [PATCH] clk: samsung: pll: Use new registration method for PLL6552 and PLL6553 Tomasz Figa
2013-08-27 1:14 ` Mike Turquette
2013-08-27 17:16 ` Kukjin Kim
2013-08-27 23:45 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460068.oJXN9T0Uhp@flatron \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox