public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 14/20] ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12
Date: Fri, 08 Apr 2016 13:25:03 +0900	[thread overview]
Message-ID: <1460089509-16260-15-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1460089509-16260-1-git-send-email-cw00.choi@samsung.com>

This patch adds the bus nodes using VDD_MIF for Exynos4x12 SoC.
Exynos4x12 has the following AXI buses to translate data
between DRAM and DMC/ACP/C2C.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board]
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/boot/dts/exynos4x12.dtsi | 68 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 84a23f962946..99a0f4ca3d47 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -281,6 +281,74 @@
 		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
 		#iommu-cells = <0>;
 	};
+
+	bus_dmc: bus_dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_acp: bus_acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+	};
+
+	bus_c2c: bus_c2c {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_C2C>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp at 100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp at 134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <900000>;
+		};
+		opp at 160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <900000>;
+		};
+		opp at 267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <950000>;
+		};
+		opp at 400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	bus_acp_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp at 100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp at 134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp at 160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp at 267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+	};
 };
 
 &combiner {
-- 
1.9.1

  parent reply	other threads:[~2016-04-08  4:25 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-08  4:24 [PATCH v8 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 01/20] PM / devfreq: exynos: Add generic exynos bus frequency driver Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 02/20] PM / devfreq: exynos: Add documentation for " Chanwoo Choi
2016-04-11 15:40   ` Rob Herring
2016-04-11 20:25     ` Chanwoo Choi
2016-04-14  5:10       ` Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 03/20] PM / devfreq: Add devfreq_get_devfreq_by_phandle() Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 04/20] PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 05/20] PM / devfreq: Add new passive governor Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 06/20] PM / devfreq: exynos: Add support of bus frequency of sub-blocks using " Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 07/20] PM / devfreq: exynos: Update documentation for bus devices " Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 08/20] PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 09/20] PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver Chanwoo Choi
2016-04-08  4:24 ` [PATCH v8 10/20] MAINTAINERS: Add samsung bus frequency driver entry Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 11/20] ARM: dts: Add DMC bus node for Exynos3250 Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 12/20] ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 13/20] ARM: dts: Add bus nodes using VDD_INT for Exynos3250 Chanwoo Choi
2016-04-08  4:25 ` Chanwoo Choi [this message]
2016-04-08  4:25 ` [PATCH v8 15/20] ARM: dts: Add bus nodes using VDD_INT for Exynos4x12 Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 16/20] ARM: dts: Add bus nodes using VDD_MIF for Exynos4210 Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 17/20] ARM: dts: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 18/20] ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 19/20] ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 Chanwoo Choi
2016-04-08  4:25 ` [PATCH v8 20/20] ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3 Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460089509-16260-15-git-send-email-cw00.choi@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox