linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 00/11] qcom: Add support for TSENS driver
Date: Thu, 14 Apr 2016 15:01:48 +0530	[thread overview]
Message-ID: <1460626319-14516-1-git-send-email-rnayak@codeaurora.org> (raw)

Current set of patches apply on 4.6-rc3. nvmem apis are currently
broken and hence need to pull in the fixes for it as proposed here [1]

Changes since v4:
* dropped qcom,tsens-slopes binding, used coefficients instead
* dropped qcom,sensor-id binding
* Added support for msm8996 family
* Other minor review fixes from v4

Changes since v3:
* Dropped 'clk: qcom: create virtual child device for TSENS' which
is picked up by Stephen
* Updated GCC bindings with optional TSENS properties

Changes since v2:
* Minor review fixes from Stephen/Punit and rebase on 4.3-rc4

Changes since v1:
* Created virtual tsens device from gcc driver for 8960,
with DT having a single node for gcc and tsens
* Minor fixes with rebasing on 4.3-rc1

Changes since RFC:
* Added support for 8916 and 8084
* Based off the latest nvmem framework patches [1]
* Minor review fixes for comments mostly from Lina

This is an attempt to have a single TSENS driver for
the different versions of the TSENS IP that exist, on
different qcom msm/apq SoCs'
Support is added for msm8916, msm8960, msm8974 and msm8996 families.

A lot of the work is based of original code from Stephen Boyd
and Siddartha Mohanadoss. I have also picked some of what
Narendran Rajan did in his attempt to upstream the support
for 8960 family. I could not keep the original authorship on
any of the patches because I ended up moving the code around
quite a bit in an effort to have a single driver for the
various devices. I would be glad to change the authorship
for any of the patches if needed.

[1] https://lkml.org/lkml/2016/4/13/654

Rajendra Nayak (11):
  thermal: qcom: tsens: Add a skeletal TSENS drivers
  thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
  thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
  thermal: core: export apis to get slope and offset
  thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
  thermal: qcom: tsens-8996: Add support for 8996 family of SoCs
  arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
  arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
  arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
  arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
  arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes

 .../devicetree/bindings/clock/qcom,gcc.txt         |  18 ++
 .../devicetree/bindings/thermal/qcom-tsens.txt     |  21 ++
 arch/arm/boot/dts/qcom-apq8064.dtsi                | 103 ++++++++
 arch/arm/boot/dts/qcom-apq8084.dtsi                | 103 ++++++++
 arch/arm/boot/dts/qcom-msm8974.dtsi                | 103 ++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |  64 +++++
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |  92 +++++++
 drivers/thermal/Kconfig                            |   5 +
 drivers/thermal/Makefile                           |   1 +
 drivers/thermal/qcom/Kconfig                       |  11 +
 drivers/thermal/qcom/Makefile                      |   2 +
 drivers/thermal/qcom/tsens-8916.c                  | 113 ++++++++
 drivers/thermal/qcom/tsens-8960.c                  | 293 +++++++++++++++++++++
 drivers/thermal/qcom/tsens-8974.c                  | 244 +++++++++++++++++
 drivers/thermal/qcom/tsens-8996.c                  |  82 ++++++
 drivers/thermal/qcom/tsens-common.c                | 135 ++++++++++
 drivers/thermal/qcom/tsens.c                       | 207 +++++++++++++++
 drivers/thermal/qcom/tsens.h                       |  92 +++++++
 drivers/thermal/thermal_core.c                     |  16 ++
 include/linux/thermal.h                            |   8 +
 20 files changed, 1713 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 create mode 100644 drivers/thermal/qcom/Kconfig
 create mode 100644 drivers/thermal/qcom/Makefile
 create mode 100644 drivers/thermal/qcom/tsens-8916.c
 create mode 100644 drivers/thermal/qcom/tsens-8960.c
 create mode 100644 drivers/thermal/qcom/tsens-8974.c
 create mode 100644 drivers/thermal/qcom/tsens-8996.c
 create mode 100644 drivers/thermal/qcom/tsens-common.c
 create mode 100644 drivers/thermal/qcom/tsens.c
 create mode 100644 drivers/thermal/qcom/tsens.h

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

             reply	other threads:[~2016-04-14  9:31 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-14  9:31 Rajendra Nayak [this message]
2016-04-14  9:31 ` [PATCH v5 01/11] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak
2016-04-28  0:20   ` Eduardo Valentin
2016-05-05  4:50     ` Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 02/11] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 03/11] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 04/11] thermal: core: export apis to get slope and offset Rajendra Nayak
2016-04-28  0:08   ` Eduardo Valentin
2016-05-05  4:47     ` Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 05/11] thermal: qcom: tsens-8960: Add support for 8960 family of SoCs Rajendra Nayak
2016-04-28  0:10   ` Eduardo Valentin
2016-05-05  4:48     ` Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 06/11] thermal: qcom: tsens-8996: Add support for 8996 " Rajendra Nayak
2016-04-28  0:13   ` Eduardo Valentin
2016-04-14  9:31 ` [PATCH v5 07/11] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 08/11] arm: dts: apq8064: " Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 09/11] arm: dts: apq8084: " Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 10/11] arm64: dts: msm8916: " Rajendra Nayak
2016-04-14  9:31 ` [PATCH v5 11/11] arm64: dts: msm8996: " Rajendra Nayak
2016-04-28  0:03   ` Eduardo Valentin
2016-05-05  4:47     ` Rajendra Nayak
2016-04-20 23:51 ` [PATCH v5 00/11] qcom: Add support for TSENS driver Eduardo Valentin
2016-04-21 10:49   ` Nayak, Rajendra
2016-04-22  9:07   ` Srinivas Kandagatla
2016-04-28  0:03 ` Eduardo Valentin
2016-05-05  4:46   ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460626319-14516-1-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).