From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK
Date: Fri, 15 Apr 2016 15:32:53 +0900 [thread overview]
Message-ID: <1460701975-24178-7-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1460701975-24178-1-git-send-email-cw00.choi@samsung.com>
This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
Bus. This clock should be handled in Bus frequency scaling driver.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
---
drivers/clk/samsung/clk-exynos5420.c | 77 ++++++++++++++++++++++--------------
1 file changed, 47 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index be03ed0fcb6b..92382cef9f90 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -554,8 +554,8 @@ static struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
};
static struct samsung_div_clock exynos5800_div_clks[] __initdata = {
- DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3),
-
+ DIV(CLK_DOUT_ACLK400_WCORE, "dout_aclk400_wcore",
+ "mout_aclk400_wcore", DIV_TOP0, 16, 3),
DIV(0, "dout_aclk550_cam", "mout_aclk550_cam",
DIV_TOP8, 16, 3),
DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam",
@@ -607,8 +607,8 @@ static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
};
static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
- DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll",
- DIV_TOP0, 16, 3),
+ DIV(CLK_DOUT_ACLK400_WCORE, "dout_aclk400_wcore",
+ "mout_aclk400_wcore_bpll", DIV_TOP0, 16, 3),
};
static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
@@ -785,31 +785,47 @@ static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
- DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
- DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
- DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
- DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
- DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3),
- DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
- DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
-
- DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
- DIV_TOP1, 0, 3),
- DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
- DIV_TOP1, 4, 3),
- DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
- DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
- DIV_TOP1, 16, 3),
- DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
- DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
- DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
-
- DIV(0, "dout_aclk333_g2d", "mout_aclk333_g2d", DIV_TOP2, 8, 3),
- DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
- DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
- DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
- DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3),
- DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
+ DIV(CLK_DOUT_ACLK400_ISP, "dout_aclk400_isp", "mout_aclk400_isp",
+ DIV_TOP0, 0, 3),
+ DIV(CLK_DOUT_ACLK400_MSCL, "dout_aclk400_mscl", "mout_aclk400_mscl",
+ DIV_TOP0, 4, 3),
+ DIV(CLK_DOUT_ACLK200, "dout_aclk200", "mout_aclk200",
+ DIV_TOP0, 8, 3),
+ DIV(CLK_DOUT_ACLK200_FSYS2, "dout_aclk200_fsys2", "mout_aclk200_fsys2",
+ DIV_TOP0, 12, 3),
+ DIV(CLK_DOUT_ACLK100_NOC, "dout_aclk100_noc", "mout_aclk100_noc",
+ DIV_TOP0, 20, 3),
+ DIV(CLK_DOUT_PCLK200_FSYS, "dout_pclk200_fsys", "mout_pclk200_fsys",
+ DIV_TOP0, 24, 3),
+ DIV(CLK_DOUT_ACLK200_FSYS, "dout_aclk200_fsys", "mout_aclk200_fsys",
+ DIV_TOP0, 28, 3),
+ DIV(CLK_DOUT_ACLK333_432_GSCL, "dout_aclk333_432_gscl",
+ "mout_aclk333_432_gscl", DIV_TOP1, 0, 3),
+ DIV(CLK_DOUT_ACLK333_432_ISP, "dout_aclk333_432_isp",
+ "mout_aclk333_432_isp", DIV_TOP1, 4, 3),
+ DIV(CLK_DOUT_ACLK66, "dout_aclk66", "mout_aclk66",
+ DIV_TOP1, 8, 6),
+ DIV(CLK_DOUT_ACLK333_432_ISP0, "dout_aclk333_432_isp0",
+ "mout_aclk333_432_isp0", DIV_TOP1, 16, 3),
+ DIV(CLK_DOUT_ACLK266, "dout_aclk266", "mout_aclk266",
+ DIV_TOP1, 20, 3),
+ DIV(CLK_DOUT_ACLK166, "dout_aclk166", "mout_aclk166",
+ DIV_TOP1, 24, 3),
+ DIV(CLK_DOUT_ACLK333, "dout_aclk333", "mout_aclk333",
+ DIV_TOP1, 28, 3),
+
+ DIV(CLK_DOUT_ACLK333_G2D, "dout_aclk333_g2d", "mout_aclk333_g2d",
+ DIV_TOP2, 8, 3),
+ DIV(CLK_DOUT_ACLK266_G2D, "dout_aclk266_g2d", "mout_aclk266_g2d",
+ DIV_TOP2, 12, 3),
+ DIV(CLK_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2,
+ 16, 3),
+ DIV(CLK_DOUT_ACLK300_JPEG, "dout_aclk300_jpeg", "mout_aclk300_jpeg",
+ DIV_TOP2, 20, 3),
+ DIV(CLK_DOUT_ACLK300_DISP1, "dout_aclk300_disp1",
+ "mout_aclk300_disp1", DIV_TOP2, 24, 3),
+ DIV(CLK_DOUT_ACLK300_GSCL, "dout_aclk300_gscl", "mout_aclk300_gscl",
+ DIV_TOP2, 28, 3),
/* DISP1 Block */
DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4),
@@ -817,7 +833,8 @@ static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2),
- DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3),
+ DIV(CLK_DOUT_ACLK400_DISP1, "dout_aclk400_disp1",
+ "mout_aclk400_disp1", DIV_TOP2, 4, 3),
/* Audio Block */
DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
--
1.9.1
next prev parent reply other threads:[~2016-04-15 6:32 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-15 6:32 [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3 Chanwoo Choi
2016-04-15 6:32 ` [PATCH v2 1/8] PM / devfreq: event: Add new Exynos NoC probe driver Chanwoo Choi
2016-04-15 8:37 ` Krzysztof Kozlowski
2016-04-15 6:32 ` [PATCH v2 2/8] PM / devfreq: event: Find the instance of devfreq-event device by using phandle Chanwoo Choi
2016-04-15 6:32 ` [PATCH v2 3/8] PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus Chanwoo Choi
2016-04-15 6:32 ` [PATCH v2 4/8] ARM: dts: Add NoC Probe dt node for Exynos542x SoC Chanwoo Choi
2016-04-15 9:04 ` Krzysztof Kozlowski
2016-04-15 6:32 ` [PATCH v2 5/8] dt-bindings: clock: Add the clock id for ACLK clock of " Chanwoo Choi
2016-04-15 6:32 ` Chanwoo Choi [this message]
2016-04-15 9:05 ` [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK Krzysztof Kozlowski
2016-04-15 16:34 ` Sylwester Nawrocki
2016-04-15 6:32 ` [PATCH v2 7/8] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC Chanwoo Choi
2016-04-15 6:32 ` [PATCH v2 8/8] ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3 Chanwoo Choi
2016-04-15 9:07 ` Krzysztof Kozlowski
2016-05-03 10:29 ` [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3 Krzysztof Kozlowski
2016-05-03 10:48 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460701975-24178-7-git-send-email-cw00.choi@samsung.com \
--to=cw00.choi@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox