linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ddaney.cavm@gmail.com (David Daney)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 12/14] arm64, acpi, numa: NUMA support based on SRAT and SLIT
Date: Tue, 19 Apr 2016 18:40:37 -0700	[thread overview]
Message-ID: <1461116439-22991-13-git-send-email-ddaney.cavm@gmail.com> (raw)
In-Reply-To: <1461116439-22991-1-git-send-email-ddaney.cavm@gmail.com>

From: Hanjun Guo <hanjun.guo@linaro.org>

Introduce a new file to hold ACPI based NUMA information parsing from
SRAT and SLIT.

SRAT includes the CPU ACPI ID to Proximity Domain mappings and memory
ranges to Proximity Domain mapping.  SLIT has the information of inter
node distances(relative number for access latency).

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
[rrichter at cavium.com Reworked for numa v10 series ]
Signed-off-by: Robert Richter <rrichter@cavium.com>
[david.daney at cavium.com reorderd and combinded with other patches in Hanjun Guo's original set]
Signed-off-by: David Daney <david.daney@cavium.com>
---
 arch/arm64/include/asm/acpi.h |   8 +++
 arch/arm64/include/asm/numa.h |   2 +
 arch/arm64/kernel/Makefile    |   1 +
 arch/arm64/kernel/acpi_numa.c | 149 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm64/kernel/smp.c       |   2 +
 arch/arm64/mm/numa.c          |   5 +-
 6 files changed, 166 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/kernel/acpi_numa.c

diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index aee323b..4b13ecd 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -113,4 +113,12 @@ static inline const char *acpi_get_enable_method(int cpu)
 pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr);
 #endif
 
+#ifdef CONFIG_ACPI_NUMA
+int arm64_acpi_numa_init(void);
+int acpi_numa_get_nid(unsigned int cpu, u64 hwid);
+#else
+static inline int arm64_acpi_numa_init(void) { return -ENOSYS; }
+static inline int acpi_numa_get_nid(unsigned int cpu, u64 hwid) { return NUMA_NO_NODE; }
+#endif /* CONFIG_ACPI_NUMA */
+
 #endif /*_ASM_ACPI_H*/
diff --git a/arch/arm64/include/asm/numa.h b/arch/arm64/include/asm/numa.h
index e9b4f29..600887e 100644
--- a/arch/arm64/include/asm/numa.h
+++ b/arch/arm64/include/asm/numa.h
@@ -5,6 +5,8 @@
 
 #ifdef CONFIG_NUMA
 
+#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
+
 /* currently, arm64 implements flat NUMA topology */
 #define parent_node(node)	(node)
 
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 3793003..69569c6 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -42,6 +42,7 @@ arm64-obj-$(CONFIG_EFI)			+= efi.o efi-entry.stub.o
 arm64-obj-$(CONFIG_PCI)			+= pci.o
 arm64-obj-$(CONFIG_ARMV8_DEPRECATED)	+= armv8_deprecated.o
 arm64-obj-$(CONFIG_ACPI)		+= acpi.o
+arm64-obj-$(CONFIG_ACPI_NUMA)		+= acpi_numa.o
 arm64-obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL)	+= acpi_parking_protocol.o
 arm64-obj-$(CONFIG_PARAVIRT)		+= paravirt.o
 arm64-obj-$(CONFIG_RANDOMIZE_BASE)	+= kaslr.o
diff --git a/arch/arm64/kernel/acpi_numa.c b/arch/arm64/kernel/acpi_numa.c
new file mode 100644
index 0000000..fd72070
--- /dev/null
+++ b/arch/arm64/kernel/acpi_numa.c
@@ -0,0 +1,149 @@
+/*
+ * ACPI 5.1 based NUMA setup for ARM64
+ * Lots of code was borrowed from arch/x86/mm/srat.c
+ *
+ * Copyright 2004 Andi Kleen, SuSE Labs.
+ * Copyright (C) 2013-2016, Linaro Ltd.
+ *		Author: Hanjun Guo <hanjun.guo@linaro.org>
+ *
+ * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
+ *
+ * Called from acpi_numa_init while reading the SRAT and SLIT tables.
+ * Assumes all memory regions belonging to a single proximity domain
+ * are in one chunk. Holes between them will be included in the node.
+ */
+
+#define pr_fmt(fmt) "ACPI: NUMA: " fmt
+
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <linux/bootmem.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+
+#include <acpi/processor.h>
+#include <asm/numa.h>
+
+static int cpus_in_srat;
+
+struct __node_cpu_hwid {
+	u32 node_id;    /* logical node containing this CPU */
+	u64 cpu_hwid;   /* MPIDR for this CPU */
+};
+
+static struct __node_cpu_hwid early_node_cpu_hwid[NR_CPUS] = {
+[0 ... NR_CPUS - 1] = {NUMA_NO_NODE, PHYS_CPUID_INVALID} };
+
+int acpi_numa_get_nid(unsigned int cpu, u64 hwid)
+{
+	int i;
+
+	for (i = 0; i < cpus_in_srat; i++) {
+		if (hwid == early_node_cpu_hwid[i].cpu_hwid)
+			return early_node_cpu_hwid[i].node_id;
+	}
+
+	return NUMA_NO_NODE;
+}
+
+static int __init get_mpidr_in_madt(int acpi_id, u64 *mpidr)
+{
+	unsigned long madt_end, entry;
+	struct acpi_table_madt *madt;
+	acpi_size tbl_size;
+
+	if (ACPI_FAILURE(acpi_get_table_with_size(ACPI_SIG_MADT, 0,
+			(struct acpi_table_header **)&madt, &tbl_size)))
+		return -ENODEV;
+
+	entry = (unsigned long)madt;
+	madt_end = entry + madt->header.length;
+
+	/* Parse all entries looking for a match. */
+	entry += sizeof(struct acpi_table_madt);
+	while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
+		struct acpi_subtable_header *header =
+			(struct acpi_subtable_header *)entry;
+
+		if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
+			struct acpi_madt_generic_interrupt *gicc =
+				container_of(header,
+				struct acpi_madt_generic_interrupt, header);
+
+			if ((gicc->flags & ACPI_MADT_ENABLED) &&
+			    (gicc->uid == acpi_id)) {
+				*mpidr = gicc->arm_mpidr;
+				early_acpi_os_unmap_memory(madt, tbl_size);
+				return 0;
+			}
+		}
+		entry += header->length;
+	}
+
+	early_acpi_os_unmap_memory(madt, tbl_size);
+	return -ENODEV;
+}
+
+/* Callback for Proximity Domain -> ACPI processor UID mapping */
+void __init acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa)
+{
+	int pxm, node;
+	u64 mpidr;
+
+	if (srat_disabled())
+		return;
+
+	if (pa->header.length < sizeof(struct acpi_srat_gicc_affinity)) {
+		pr_err("SRAT: Invalid SRAT header length: %d\n",
+			pa->header.length);
+		bad_srat();
+		return;
+	}
+
+	if (!(pa->flags & ACPI_SRAT_GICC_ENABLED))
+		return;
+
+	if (cpus_in_srat >= NR_CPUS) {
+		pr_warn_once("SRAT: cpu_to_node_map[%d] is too small, may not be able to use all cpus\n",
+			     NR_CPUS);
+		return;
+	}
+
+	pxm = pa->proximity_domain;
+	node = acpi_map_pxm_to_node(pxm);
+
+	if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) {
+		pr_err("SRAT: Too many proximity domains %d\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	if (get_mpidr_in_madt(pa->acpi_processor_uid, &mpidr)) {
+		pr_err("SRAT: PXM %d with ACPI ID %d has no valid MPIDR in MADT\n",
+			pxm, pa->acpi_processor_uid);
+		bad_srat();
+		return;
+	}
+
+	early_node_cpu_hwid[cpus_in_srat].node_id = node;
+	early_node_cpu_hwid[cpus_in_srat].cpu_hwid =  mpidr;
+	node_set(node, numa_nodes_parsed);
+	cpus_in_srat++;
+	pr_info("SRAT: PXM %d -> MPIDR 0x%Lx -> Node %d cpu %d\n",
+		pxm, mpidr, node, cpus_in_srat);
+}
+
+int __init arm64_acpi_numa_init(void)
+{
+	int ret;
+
+	ret = acpi_numa_init();
+	if (ret)
+		return ret;
+
+	return srat_disabled() ? -EINVAL : 0;
+}
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index bebc4c6..6c7ef8f 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -524,6 +524,8 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
 	 */
 	acpi_set_mailbox_entry(cpu_count, processor);
 
+	early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count, hwid));
+
 	cpu_count++;
 }
 
diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index 6cb03f9..fc15186 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi.h>
 #include <linux/bootmem.h>
 #include <linux/memblock.h>
 #include <linux/module.h>
@@ -388,7 +389,9 @@ static int __init dummy_numa_init(void)
 void __init arm64_numa_init(void)
 {
 	if (!numa_off) {
-		if (!numa_init(of_numa_init))
+		if (!acpi_disabled && !numa_init(arm64_acpi_numa_init))
+			return;
+		if (acpi_disabled && !numa_init(of_numa_init))
 			return;
 	}
 
-- 
1.7.11.7

  parent reply	other threads:[~2016-04-20  1:40 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-20  1:40 [PATCH v5 00/14] ACPI NUMA support for ARM64 David Daney
2016-04-20  1:40 ` [PATCH v5 01/14] acpi, numa: Use pr_fmt() instead of printk David Daney
2016-04-20  1:40 ` [PATCH v5 02/14] acpi, numa: Replace ACPI_DEBUG_PRINT() with pr_debug() David Daney
2016-04-20  1:40 ` [PATCH v5 03/14] acpi, numa: remove duplicate NULL check David Daney
2016-04-20  1:40 ` [PATCH v5 04/14] acpi, numa: Move acpi_numa_arch_fixup() to ia64 only David Daney
2016-04-26  5:15   ` Hanjun Guo
2016-04-20  1:40 ` [PATCH v5 05/14] acpi, numa: move acpi_numa_slit_init() to drivers/acpi/numa.c David Daney
2016-04-20  1:40 ` [PATCH v5 06/14] arm64, numa: rework numa_add_memblk() David Daney
2016-04-20  1:40 ` [PATCH v5 07/14] x86, acpi, numa: cleanup acpi_numa_processor_affinity_init() David Daney
2016-04-20  1:40 ` [PATCH v5 08/14] acpi, numa: move bad_srat() and srat_disabled() to drivers/acpi/numa.c David Daney
2016-04-20  1:40 ` [PATCH v5 09/14] acpi, numa: remove unneeded acpi_numa=1 David Daney
2016-04-20  1:40 ` [PATCH v5 10/14] acpi, numa: Move acpi_numa_memory_affinity_init() to drivers/acpi/numa.c David Daney
2016-04-20  1:40 ` [PATCH v5 11/14] acpi, numa, srat: Improve SRAT error detection and add messages David Daney
2016-04-20  1:40 ` David Daney [this message]
2016-04-20  7:41   ` [PATCH v5 12/14] arm64, acpi, numa: NUMA support based on SRAT and SLIT Dennis Chen
2016-04-20  8:31     ` Ganapatrao Kulkarni
2016-04-20 16:29       ` David Daney
2016-04-21 10:06   ` Dennis Chen
2016-04-27  1:14     ` David Daney
2016-04-27  4:04       ` Hanjun Guo
2016-04-27 11:37         ` Dennis Chen
2016-04-27 15:40           ` David Daney
2016-04-20  1:40 ` [PATCH v5 13/14] acpi, numa: Enable ACPI based NUMA on ARM64 David Daney
2016-04-20  1:40 ` [PATCH v5 14/14] arm64, acpi, numa: Default enable ACPI_NUMA with NUMA David Daney
2016-04-25 11:13 ` [PATCH v5 00/14] ACPI NUMA support for ARM64 Will Deacon
2016-04-25 16:47   ` David Daney
2016-04-26  5:31     ` Hanjun Guo
2016-04-26 12:15       ` Will Deacon
2016-04-26 13:03         ` Hanjun Guo
2016-04-26 13:35           ` Will Deacon
2016-04-26 16:48             ` David Daney
2016-04-27  1:49             ` Hanjun Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461116439-22991-13-git-send-email-ddaney.cavm@gmail.com \
    --to=ddaney.cavm@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).