From: geert+renesas@glider.be (Geert Uytterhoeven)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 06/11] soc: renesas: rcar-sysc: Add support for R-Car H1 power areas
Date: Wed, 20 Apr 2016 14:02:41 +0200 [thread overview]
Message-ID: <1461153766-750-7-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1461153766-750-1-git-send-email-geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v6:
- No changes,
v5:
- Add Reviewed-by,
- Add "always-on" power area,
v4:
- Drop R8A7779_PD_SH, as it's not documented in the datasheet,
- Reformat table,
v3:
- New (converted from DT to C).
---
drivers/soc/renesas/Makefile | 2 +-
drivers/soc/renesas/r8a7779-sysc.c | 34 ++++++++++++++++++++++++++++++++++
drivers/soc/renesas/rcar-sysc.c | 3 +++
drivers/soc/renesas/rcar-sysc.h | 1 +
4 files changed, 39 insertions(+), 1 deletion(-)
create mode 100644 drivers/soc/renesas/r8a7779-sysc.c
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 2b64f6c9468136f9..b8aa9db4fdd95eb8 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o
+obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o
obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o
obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o
obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o
diff --git a/drivers/soc/renesas/r8a7779-sysc.c b/drivers/soc/renesas/r8a7779-sysc.c
new file mode 100644
index 0000000000000000..9e8e6b7faa044684
--- /dev/null
+++ b/drivers/soc/renesas/r8a7779-sysc.c
@@ -0,0 +1,34 @@
+/*
+ * Renesas R-Car H1 System Controller
+ *
+ * Copyright (C) 2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7779-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7779_areas[] __initconst = {
+ { "always-on", 0, 0, R8A7779_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "arm1", 0x40, 1, R8A7779_PD_ARM1, R8A7779_PD_ALWAYS_ON,
+ PD_CPU_CR },
+ { "arm2", 0x40, 2, R8A7779_PD_ARM2, R8A7779_PD_ALWAYS_ON,
+ PD_CPU_CR },
+ { "arm3", 0x40, 3, R8A7779_PD_ARM3, R8A7779_PD_ALWAYS_ON,
+ PD_CPU_CR },
+ { "sgx", 0xc0, 0, R8A7779_PD_SGX, R8A7779_PD_ALWAYS_ON },
+ { "vdp", 0x100, 0, R8A7779_PD_VDP, R8A7779_PD_ALWAYS_ON },
+ { "imp", 0x140, 0, R8A7779_PD_IMP, R8A7779_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7779_sysc_info __initconst = {
+ .areas = r8a7779_areas,
+ .num_areas = ARRAY_SIZE(r8a7779_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 0d49a25de740fbf8..858ad23ae03aa809 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -284,6 +284,9 @@ finalize:
}
static const struct of_device_id rcar_sysc_matches[] = {
+#ifdef CONFIG_ARCH_R8A7779
+ { .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info },
+#endif
{ /* sentinel */ }
};
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 7bb48b4f7334f960..7cf58b9cd544f4b9 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -50,4 +50,5 @@ struct rcar_sysc_info {
unsigned int num_areas;
};
+extern const struct rcar_sysc_info r8a7779_sysc_info;
#endif /* __SOC_RENESAS_RCAR_SYSC_H__ */
--
1.9.1
next prev parent reply other threads:[~2016-04-20 12:02 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-20 12:02 [PATCH v6 00/11] soc: renesas: Add R-Car SYSC PM Domain Support Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 01/11] soc: renesas: Move pm-rcar to drivers/soc/renesas/rcar-sysc Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 02/11] soc: renesas: rcar-sysc: Improve rcar_sysc_power() debug info Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 03/11] soc: renesas: rcar-sysc: Add DT support for SYSC PM domains Geert Uytterhoeven
2016-04-20 13:59 ` Laurent Pinchart
2016-04-22 7:21 ` Ulf Hansson
2016-04-20 12:02 ` [PATCH v6 04/11] soc: renesas: rcar-sysc: Make rcar_sysc_power_is_off() static Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 05/11] soc: renesas: rcar-sysc: Enable Clock Domain for I/O devices Geert Uytterhoeven
2016-04-22 7:28 ` Ulf Hansson
2016-04-22 7:59 ` Geert Uytterhoeven
2016-04-25 8:30 ` Ulf Hansson
2016-04-20 12:02 ` Geert Uytterhoeven [this message]
2016-04-20 12:02 ` [PATCH v6 07/11] soc: renesas: rcar-sysc: Add support for R-Car H2 power areas Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 08/11] soc: renesas: rcar-sysc: Add support for R-Car M2-W " Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 09/11] soc: renesas: rcar-sysc: Add support for R-Car M2-N " Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 10/11] soc: renesas: rcar-sysc: Add support for R-Car E2 " Geert Uytterhoeven
2016-04-20 12:02 ` [PATCH v6 11/11] soc: renesas: rcar-sysc: Add support for R-Car H3 " Geert Uytterhoeven
2016-04-21 3:28 ` [PATCH v6 00/11] soc: renesas: Add R-Car SYSC PM Domain Support Simon Horman
2016-04-21 15:14 ` Geert Uytterhoeven
2016-04-22 0:33 ` Simon Horman
2016-04-22 4:12 ` Laurent Pinchart
2016-04-22 8:15 ` Simon Horman
2016-04-23 0:30 ` Laurent Pinchart
2016-04-22 7:02 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461153766-750-7-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).