From: peter.griffin@linaro.org (Peter Griffin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/18] Add support for FDMA DMA controller found on STi chipsets
Date: Thu, 21 Apr 2016 12:04:17 +0100 [thread overview]
Message-ID: <1461236675-10176-1-git-send-email-peter.griffin@linaro.org> (raw)
Hi Vinod / Maxime,
Sorry for the delay between v2 and v3. I've been out on sick leave for a few months.
This patchset adds support for the Flexible Direct Memory Access (FDMA) core
found on STi chipsets from STMicroelectronics. The FDMA is a slim (xp70) core CPU
with a dedicated firmware. It is a general purpose DMA controller supporting
16 independent channels and data can be moved from memory to memory or between
memory and paced latency critical real time targets.
After some discussion with the DT maintainers I've decided not to include the
firmware name in DT, and generate the name based on the compatible string.
This is in keeping with how most other kernel drivers request firmware, and avoids
a new DT firmware name or fdma id binding.
I've also dropped the xbar support for the moment, as I believe it should be
re-worked based on some of the xbar API's that TI recently added. As requested
I've also split it into smaller patches to help with a faster review.
V3 also includes updates to the ASoC DT documentation, and extra DT patches
for Maximes STi tree to enable ASoC on STi407 based platforms using the fdma
driver.
regards,
Peter.
Changes since v2:
- Change to dma-controller (Arnd)
- Remove platform data header file and simplifiy code (Arnd)
- Remove FW_LOADER_USER_HELPER_FALLBACK and rework firmware loading to device config (Vinod)
- Use SET_RUNTIME_PM_OPS helpers (Vinod)
- Remove fdma-id dt prop and use compatibles to generate different fdma firmware names (Arnd / Lee)
- Add sti-asoc-card DT nodes and pinmux config for uniperif player & reader (Peter)
- Update sti-asoc-card DT binding documentation (Peter)
- Enable STi audio drivers in multi_v7_defconfig (Peter)
Changes since v1:
- split into smaller patches for easier / faster review (Vinod)
- new fill_hw_mode() with common code (Vinod)
- new config_reqctrl() called from *_prep() instead of device_config cb (Vinod)
- fdma-xbar support removed (Peter)
- rework firmware name mechanism so fwname isn't in DT (Peter / Lee)
- st_fdma_seg_to_mem can be static (Paul)
- EXPORT_SYMBOL st_fdma_filter_fn not required (Paul)
- s/channel/channels (vinod)
- better describe "Must be <3>" (vinod)
- sizeof(*ehdr) (vinod)
- print values on error debug (vinod)
- empty line (Vinod)
- Update to -EIO (Vinod)
- Make st_fdma tristate (Paul)
- Remove __exit tag from .remove (Maxime)
- Update MAINTAINERS rule to fdma* (Lee)
- Unit address should match reg property (Lee)
Peter Griffin (18):
dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding
documentation
dmaengine: st_fdma: Add STMicroelectronics FDMA driver header file
dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support
dmaengine: st_fdma: Add xp70 firmware loading mechanism.
dmaengine: st_fdma: Add fdma suspend and resume callbacks.
ARM: STi: DT: STiH407: Add FDMA driver dt nodes.
MAINTAINERS: Add FDMA driver files to STi section.
ARM: multi_v7_defconfig: Enable STi FDMA driver
ASoC: sti: Update DT example to match the driver code
ASoC: sti: Update example to include assigned-clocks and mclk-fs
ARM: multi_v7_defconfig: Enable STi and simple-card drivers.
ARM: DT: STiH407: Add i2s_out pinctrl configuration
ARM: DT: STiH407: Add i2s_in pinctrl configuration
ARM: DT: STiH407: Add spdif_out pinctrl config
ARM: STi: DT: STiH407: Add sti-sasg-codec dt node
ARM: STi: DT: STiH407: Add uniperif player dt nodes
ARM: STi: DT: STiH407: Add uniperif reader dt nodes
ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card
Documentation/devicetree/bindings/dma/st_fdma.txt | 87 ++
.../devicetree/bindings/sound/st,sti-asoc-card.txt | 22 +-
MAINTAINERS | 1 +
arch/arm/boot/dts/stih407-family.dtsi | 164 +++
arch/arm/boot/dts/stih407-pinctrl.dtsi | 55 +
arch/arm/boot/dts/stihxxx-b2120.dtsi | 40 +
arch/arm/configs/multi_v7_defconfig | 4 +
drivers/dma/Kconfig | 12 +
drivers/dma/Makefile | 1 +
drivers/dma/st_fdma.c | 1203 ++++++++++++++++++++
drivers/dma/st_fdma.h | 281 +++++
11 files changed, 1863 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/st_fdma.txt
create mode 100644 drivers/dma/st_fdma.c
create mode 100644 drivers/dma/st_fdma.h
--
1.9.1
next reply other threads:[~2016-04-21 11:04 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-21 11:04 Peter Griffin [this message]
2016-04-21 11:04 ` [PATCH 01/18] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation Peter Griffin
2016-04-21 11:25 ` Arnd Bergmann
2016-04-26 12:00 ` Peter Griffin
2016-04-21 11:04 ` [PATCH 02/18] dmaengine: st_fdma: Add STMicroelectronics FDMA driver header file Peter Griffin
2016-04-21 11:20 ` Arnd Bergmann
2016-04-21 11:04 ` [PATCH 03/18] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support Peter Griffin
2016-04-21 11:24 ` Arnd Bergmann
2016-04-21 11:26 ` Appana Durga Kedareswara Rao
2016-04-21 14:58 ` Peter Griffin
2016-04-25 9:04 ` Lee Jones
2016-04-26 16:56 ` Vinod Koul
2016-04-27 12:59 ` Peter Griffin
2016-05-02 9:30 ` Vinod Koul
2016-05-09 17:30 ` Peter Griffin
2016-04-21 11:04 ` [PATCH 04/18] dmaengine: st_fdma: Add xp70 firmware loading mechanism Peter Griffin
2016-04-26 17:00 ` Vinod Koul
2016-05-11 7:57 ` Peter Griffin
2016-05-12 5:40 ` Vinod Koul
2016-04-21 11:04 ` [PATCH 05/18] dmaengine: st_fdma: Add fdma suspend and resume callbacks Peter Griffin
2016-04-21 11:04 ` [PATCH 06/18] ARM: STi: DT: STiH407: Add FDMA driver dt nodes Peter Griffin
2016-04-21 11:04 ` [PATCH 07/18] MAINTAINERS: Add FDMA driver files to STi section Peter Griffin
2016-04-21 11:04 ` [PATCH 08/18] ARM: multi_v7_defconfig: Enable STi FDMA driver Peter Griffin
2016-04-21 11:25 ` Arnd Bergmann
2016-04-26 10:42 ` Peter Griffin
2016-04-21 11:04 ` [PATCH 09/18] ASoC: sti: Update DT example to match the driver code Peter Griffin
2016-04-21 11:27 ` Arnd Bergmann
2016-04-26 10:11 ` Peter Griffin
2016-04-26 10:58 ` Arnd Bergmann
2016-04-26 11:15 ` Peter Griffin
2016-04-26 11:44 ` Arnd Bergmann
2016-05-04 7:52 ` Arnaud Pouliquen
2016-05-04 9:05 ` Arnd Bergmann
2016-04-21 15:57 ` Mark Brown
2016-04-26 11:02 ` Peter Griffin
2016-05-03 15:46 ` Arnaud Pouliquen
2016-04-21 11:04 ` [PATCH 10/18] ASoC: sti: Update example to include assigned-clocks and mclk-fs Peter Griffin
2016-04-21 15:49 ` Mark Brown
2016-04-26 11:52 ` Peter Griffin
2016-04-26 14:23 ` Mark Brown
2016-04-26 14:51 ` Peter Griffin
2016-04-26 15:03 ` Mark Brown
2016-04-26 16:14 ` Peter Griffin
2016-04-26 16:41 ` Mark Brown
2016-04-26 17:49 ` Peter Griffin
2016-04-21 11:04 ` [PATCH 11/18] ARM: multi_v7_defconfig: Enable STi and simple-card drivers Peter Griffin
2016-04-21 11:04 ` [PATCH 12/18] ARM: DT: STiH407: Add i2s_out pinctrl configuration Peter Griffin
2016-04-21 11:04 ` [PATCH 13/18] ARM: DT: STiH407: Add i2s_in " Peter Griffin
2016-04-21 11:04 ` [PATCH 14/18] ARM: DT: STiH407: Add spdif_out pinctrl config Peter Griffin
2016-04-21 11:04 ` [PATCH 15/18] ARM: STi: DT: STiH407: Add sti-sasg-codec dt node Peter Griffin
2016-04-21 11:04 ` [PATCH 16/18] ARM: STi: DT: STiH407: Add uniperif player dt nodes Peter Griffin
2016-04-21 11:04 ` [PATCH 17/18] ARM: STi: DT: STiH407: Add uniperif reader " Peter Griffin
2016-04-21 11:04 ` [PATCH 18/18] ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card Peter Griffin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461236675-10176-1-git-send-email-peter.griffin@linaro.org \
--to=peter.griffin@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).