[GIT PULL 1/4] Broadcom devicetree changes for 4.7

[GIT PULL 1/4] Broadcom devicetree changes for 4.7

[Florian Fainelli]

The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.7/devicetree

for you to fetch changes up to 3db62afd11738f896ef83132022a40be74961860:

  Merge tag 'bcm2835-dt-next-2016-04-20' into devicetree/next (2016-04-22 12:22:04 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoC Device Tree changes:

- Rafal adds proper VCC GPIO to be fed to the USB host controllers for known
  BCM5301x devices needing that, he also enables earlycon, and enables the
  SPI-NOR flashes on relevant devices

- Eric adds the VideoCore 4 Device Tree nodes to the BCM283x Device Tree and
  provides a DRM patch to kick out the simplefb framebuffer to avoid conflicts

- Stephan adds proper CPU nodes for the ARM processor on the BCM2835 SoC Device
  Tree

- Martin provides a binding fix for the DMA channel interrupt numbers and
  description

----------------------------------------------------------------
Eric Anholt (2):
      drm/vc4: Kick out the simplefb framebuffer before we set up KMS.
      ARM: bcm2835: Add VC4 to the device tree.

Florian Fainelli (1):
      Merge tag 'bcm2835-dt-next-2016-04-20' into devicetree/next

Martin Sperl (1):
      dt/bindings: bcm2835: correct description for DMA-int

Rafa? Mi?ecki (3):
      ARM: BCM5301X: Set vcc-gpio for USB controllers of few devices
      ARM: BCM5301X: Enable earlycon on tested devices
      ARM: BCM5301X: Add DT entry for SPI controller and NOR flash

Stefan Wahren (1):
      ARM: bcm2835: add CPU node for ARM core

 .../brcm,bcm2835-armctrl-ic.txt                    |  4 +-
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts           |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-a.dts                |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts           |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts           |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-b.dts                |  4 ++
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |  9 +++++
 arch/arm/boot/dts/bcm2835.dtsi                     | 11 +++++
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts              |  4 ++
 arch/arm/boot/dts/bcm283x.dtsi                     | 47 ++++++++++++++++++++++
 arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 10 ++++-
 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts       |  6 ++-
 arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 17 +++-----
 arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts      |  6 ++-
 arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts |  2 +-
 arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts  |  5 +++
 arch/arm/boot/dts/bcm4709-netgear-r8000.dts        |  8 ++++
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      |  6 ++-
 arch/arm/boot/dts/bcm5301x.dtsi                    | 32 +++++++++++++++
 drivers/gpu/drm/vc4/vc4_drv.c                      | 20 +++++++++
 20 files changed, 188 insertions(+), 19 deletions(-)

[GIT PULL 2/4] Broadcom devicetree-arm64 changes for 4.7

[Florian Fainelli]

The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.7/devicetree-arm64

for you to fetch changes up to a9abb475a4fd3e23f2de8bf134b71e10b560b910:

  arm64: dts: NS2 secondary core enablement via PSCI (2016-04-22 12:02:28 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoC Device Tree changes:

- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
  DMA, GIC maintenance interrupt, PL022 SPI controller

- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
  for consistency with how other Broadcom SoCs are doing this

- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
  the standard PSCI 1.0 firmware interface

----------------------------------------------------------------
Anup Patel (4):
      arm64: dts: Add ARM PL330 DMA DT node for NS2
      arm64: dts: Add maintenance interrupt for GIC in NS2 DT
      arm64: dts: Move NS2 clock DT nodes to separate DT file
      arm64: dts: Add ARM PL022 SPI DT nodes for NS2

Luke Starrett (1):
      arm64: dts: NS2 secondary core enablement via PSCI

 arch/arm64/boot/dts/broadcom/ns2-clock.dtsi | 105 +++++++++++++++++++
 arch/arm64/boot/dts/broadcom/ns2-svk.dts    |  45 ++++++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi       | 155 ++++++++++------------------
 3 files changed, 205 insertions(+), 100 deletions(-)
 create mode 100644 arch/arm64/boot/dts/broadcom/ns2-clock.dtsi

[GIT PULL 2/4] Broadcom devicetree-arm64 changes for 4.7

[Arnd Bergmann]

On Saturday 23 April 2016 12:58:58 Florian Fainelli wrote:
> This pull request contains Broadcom ARM64-based SoC Device Tree changes:
> 
> - Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
>   DMA, GIC maintenance interrupt, PL022 SPI controller
> 
> - Anup also re-orgnanizes the clock Device Tree fragments into a separate file
>   for consistency with how other Broadcom SoCs are doing this
> 
> - Luke switches the SMP enable-method and reboot from a spin-table + syscon to
>   the standard PSCI 1.0 firmware interface
> 

Pulled into next/dt64, thanks!

	Arnd

[GIT PULL 3/4] Broadcom defconfig changes for 4.7

[Florian Fainelli]

The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.7/defconfig

for you to fetch changes up to b72541b33825807d247b6455364db9cd3ca5d6ad:

  Merge tag 'bcm2835-defconfig-next-2016-04-20' into defconfig/next (2016-04-22 12:25:34 -0700)

----------------------------------------------------------------
This pull request contains defconfig changes for Broadcom ARM-based SoCs:

- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
  switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller

- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
  Power Management support, switching sdhci-bcm2835 for sdhci-iproc

----------------------------------------------------------------
Eric Anholt (7):
      ARM: multi_v7_defconfig: Add more BCM2835 support
      ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC
      ARM: multi_v7_defconfig: Build in DWC2 USB support
      ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
      ARM: bcm2835: Enable CONFIG_PM.
      ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
      ARM: bcm2835: Enable NFS root support.

Florian Fainelli (1):
      Merge tag 'bcm2835-defconfig-next-2016-04-20' into defconfig/next

 arch/arm/configs/bcm2835_defconfig  | 11 +++++++----
 arch/arm/configs/multi_v7_defconfig |  5 +++--
 2 files changed, 10 insertions(+), 6 deletions(-)

[GIT PULL 3/4] Broadcom defconfig changes for 4.7

[Arnd Bergmann]

On Saturday 23 April 2016 12:58:59 Florian Fainelli wrote:
> This pull request contains defconfig changes for Broadcom ARM-based SoCs:
> 
> - Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
>   switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
> 
> - Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
>   Power Management support, switching sdhci-bcm2835 for sdhci-iproc
> 
> 

Pulled into next/defconfig, thanks!

	Arnd

[GIT PULL 4/4] Broadcom drivers changes for 4.7

[Florian Fainelli]

The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.7/drivers

for you to fetch changes up to b0ec633c28d42281c03b41dbc92a4448a481f2f3:

  bus: brcmstb_gisb: Rework dependencies (2016-04-18 14:20:30 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs drivers changes:

- Justin adds a soc_dev driver to properly report to user-space the Broadcom
  STB SoC family, product and revision

- Florian reworks how the brcmstb_gisb driver dependency is done to enable it
  on Broadcom STB MIPS-based SoCs and remove a select in
  arch/arm/mach-bcm/Kconfig

----------------------------------------------------------------
Florian Fainelli (1):
      bus: brcmstb_gisb: Rework dependencies

Justin Chen (1):
      soc: brcmstb: add SoC driver to brcmstb

 arch/arm/mach-bcm/Kconfig    |  2 +-
 drivers/bus/Kconfig          |  1 +
 drivers/soc/brcmstb/common.c | 58 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+), 1 deletion(-)

[GIT PULL 4/4] Broadcom drivers changes for 4.7

[Arnd Bergmann]

On Saturday 23 April 2016 12:59:00 Florian Fainelli wrote:
> This pull request contains Broadcom ARM-based SoCs drivers changes:
> 
> - Justin adds a soc_dev driver to properly report to user-space the Broadcom
>   STB SoC family, product and revision
> 
> - Florian reworks how the brcmstb_gisb driver dependency is done to enable it
>   on Broadcom STB MIPS-based SoCs and remove a select in
>   arch/arm/mach-bcm/Kconfig
> 

Pulled into next/drivers, thanks!

	Arnd

[GIT PULL 1/4] Broadcom devicetree changes for 4.7

[Arnd Bergmann]

On Saturday 23 April 2016 12:58:57 Florian Fainelli wrote:
> This pull request contains Broadcom ARM-based SoC Device Tree changes:
> 
> - Rafal adds proper VCC GPIO to be fed to the USB host controllers for known
>   BCM5301x devices needing that, he also enables earlycon, and enables the
>   SPI-NOR flashes on relevant devices
> 
> - Eric adds the VideoCore 4 Device Tree nodes to the BCM283x Device Tree and
>   provides a DRM patch to kick out the simplefb framebuffer to avoid conflicts
> 
> - Stephan adds proper CPU nodes for the ARM processor on the BCM2835 SoC Device
>   Tree
> 
> - Martin provides a binding fix for the DMA channel interrupt numbers and
>   description
> 

Pulled into next/dt, thanks!

	Arnd