From mboxrd@z Thu Jan 1 00:00:00 1970 From: kernel@martin.sperl.org (kernel at martin.sperl.org) Date: Mon, 25 Apr 2016 13:39:40 +0000 Subject: [PATCH 3/3] ASoC: bcm2835: Register also as PCM device In-Reply-To: <1461591580-7565-1-git-send-email-kernel@martin.sperl.org> References: <1461591580-7565-1-git-send-email-kernel@martin.sperl.org> Message-ID: <1461591580-7565-3-git-send-email-kernel@martin.sperl.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Matthias Reichl Register i2s also as pcm device. Code ported from bcm2708-i2s driver in Raspberry Pi tree. Signed-off-by: Florian Meier Signed-off-by: Matthias Reichl Signed-off-by: Martin Sperl --- sound/soc/bcm/bcm2835-i2s.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c index a0026e2..8e93295 100644 --- a/sound/soc/bcm/bcm2835-i2s.c +++ b/sound/soc/bcm/bcm2835-i2s.c @@ -632,6 +632,27 @@ static const struct snd_soc_component_driver bcm2835_i2s_component = { .name = "bcm2835-i2s-comp", }; +static const struct snd_pcm_hardware bcm2835_pcm_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_JOINT_DUPLEX | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S32_LE, + .period_bytes_min = 32, + .period_bytes_max = 64 * PAGE_SIZE, + .periods_min = 2, + .periods_max = 255, + .buffer_bytes_max = 128 * PAGE_SIZE, +}; + +static const struct snd_dmaengine_pcm_config bcm2835_dmaengine_pcm_config = { + .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, + .pcm_hardware = &bcm2835_pcm_hardware, + .prealloc_buffer_size = 256 * PAGE_SIZE, +}; + static int bcm2835_i2s_probe(struct platform_device *pdev) { struct bcm2835_i2s_dev *dev; @@ -704,7 +725,9 @@ static int bcm2835_i2s_probe(struct platform_device *pdev) return ret; } - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); + ret = devm_snd_dmaengine_pcm_register( + &pdev->dev, &bcm2835_dmaengine_pcm_config, + SND_DMAENGINE_PCM_FLAG_COMPAT); if (ret) { dev_err(&pdev->dev, "Could not register PCM: %d\n", ret); return ret; -- 2.1.4