From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 5/9] drivers: platform: Configure dma operations at probe time
Date: Mon, 25 Apr 2016 21:28:10 +0530 [thread overview]
Message-ID: <1461599894-1969-6-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1461599894-1969-1-git-send-email-sricharan@codeaurora.org>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Configuring DMA ops at probe time will allow deferring device probe when
the IOMMU isn't available yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/base/platform.c | 13 +++++++++++++
drivers/of/platform.c | 7 +++----
2 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index f437afa..17e64a4 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -557,6 +557,12 @@ static int platform_drv_probe(struct device *_dev)
if (ret < 0)
return ret;
+ if (of_have_populated_dt()) {
+ ret = of_dma_configure_ops(_dev, _dev->of_node);
+ if (ret < 0)
+ goto done;
+ }
+
ret = dev_pm_domain_attach(_dev, true);
if (ret != -EPROBE_DEFER) {
if (drv->probe) {
@@ -569,6 +575,11 @@ static int platform_drv_probe(struct device *_dev)
}
}
+ if (of_have_populated_dt()) {
+ if (ret)
+ of_dma_deconfigure(_dev);
+ }
+done:
if (drv->prevent_deferred_probe && ret == -EPROBE_DEFER) {
dev_warn(_dev, "probe deferral not supported\n");
ret = -ENXIO;
@@ -591,6 +602,8 @@ static int platform_drv_remove(struct device *_dev)
if (drv->remove)
ret = drv->remove(dev);
dev_pm_domain_detach(_dev, true);
+ if (of_have_populated_dt())
+ of_dma_deconfigure(_dev);
return ret;
}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 17ee8d5..12bbc8e1 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -180,11 +180,9 @@ static struct platform_device *of_platform_device_create_pdata(
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
of_dma_configure_masks(&dev->dev, dev->dev.of_node);
- of_dma_configure_ops(&dev->dev, dev->dev.of_node);
of_msi_configure(&dev->dev, dev->dev.of_node);
if (of_device_add(dev) != 0) {
- of_dma_deconfigure(&dev->dev);
platform_device_put(dev);
goto err_clear_flag;
}
@@ -481,11 +479,12 @@ static int of_platform_device_destroy(struct device *dev, void *data)
if (dev->bus == &platform_bus_type)
platform_device_unregister(to_platform_device(dev));
#ifdef CONFIG_ARM_AMBA
- else if (dev->bus == &amba_bustype)
+ else if (dev->bus == &amba_bustype) {
amba_device_unregister(to_amba_device(dev));
+ of_dma_deconfigure(dev);
+ }
#endif
- of_dma_deconfigure(dev);
of_node_clear_flag(dev->of_node, OF_POPULATED);
of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
return 0;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2016-04-25 15:58 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 15:58 [RFC 0/9] IOMMU probe deferral support Sricharan R
2016-04-25 15:58 ` [RFC 1/9] arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() Sricharan R
2016-04-25 15:58 ` [RFC 2/9] of: dma: Move range size workaround to of_dma_get_range() Sricharan R
2016-04-25 15:58 ` [RFC 3/9] of: dma: Make of_dma_deconfigure() public Sricharan R
2016-04-25 15:58 ` [RFC 4/9] of: dma: Split of_configure_dma() into mask and ops configuration Sricharan R
2016-04-25 15:58 ` Sricharan R [this message]
2016-05-24 15:45 ` [RFC 5/9] drivers: platform: Configure dma operations at probe time Robin Murphy
2016-05-26 4:03 ` Sricharan
2016-04-25 15:58 ` [RFC 6/9] iommu: of: Handle IOMMU lookup failure with deferred probing or error Sricharan R
2016-04-25 15:58 ` [RFC 7/9] drivers: iommu: Add a new add device api Sricharan R
2016-04-25 15:58 ` [RFC 8/9] drivers: of: call iommu_bus_add_dev after iommu_configure_ops Sricharan R
2016-05-23 8:37 ` Marek Szyprowski
2016-05-23 8:47 ` Sricharan
2016-05-24 15:59 ` Robin Murphy
2016-05-26 5:56 ` Sricharan
2016-04-25 15:58 ` [RFC 9/9] drivers: iommu: arm-smmu: Set iommu_ops in probe Sricharan R
2016-05-12 12:52 ` [RFC 0/9] IOMMU probe deferral support Marek Szyprowski
2016-05-13 6:53 ` Sricharan
2016-05-20 11:34 ` Sricharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461599894-1969-6-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).