From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v2 2/7] usb: xhci: plat: attach the usb_phy to the correct hcd
Date: Tue, 26 Apr 2016 20:57:35 +0800 [thread overview]
Message-ID: <1461675460-2295-3-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1461675460-2295-1-git-send-email-jszhang@marvell.com>
Commit 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") adds the
usb_phy for usb3, but it attached the usb_phy to incorrect hcd. The
xhci->shared_hcd is the hcd for usb3, this patch fixes this issue
by attach the usb_phy to the xhci->shared_hcd.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
drivers/usb/host/xhci-plat.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 8cb46cb..9ff89e9 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -144,6 +144,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
struct resource *res;
struct usb_hcd *hcd;
struct clk *clk;
+ struct usb_phy *usb_phy;
int ret;
int irq;
@@ -231,17 +232,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
- hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
- if (IS_ERR(hcd->usb_phy)) {
- ret = PTR_ERR(hcd->usb_phy);
+ usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+ if (IS_ERR(usb_phy)) {
+ ret = PTR_ERR(usb_phy);
if (ret == -EPROBE_DEFER)
goto put_usb3_hcd;
- hcd->usb_phy = NULL;
+ usb_phy = NULL;
} else {
- ret = usb_phy_init(hcd->usb_phy);
+ ret = usb_phy_init(usb_phy);
if (ret)
goto put_usb3_hcd;
}
+ xhci->shared_hcd->usb_phy = usb_phy;
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
@@ -258,7 +260,7 @@ dealloc_usb2_hcd:
usb_remove_hcd(hcd);
disable_usb_phy:
- usb_phy_shutdown(hcd->usb_phy);
+ usb_phy_shutdown(usb_phy);
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
@@ -280,7 +282,7 @@ static int xhci_plat_remove(struct platform_device *dev)
struct clk *clk = xhci->clk;
usb_remove_hcd(xhci->shared_hcd);
- usb_phy_shutdown(hcd->usb_phy);
+ usb_phy_shutdown(xhci->shared_hcd->usb_phy);
usb_remove_hcd(hcd);
usb_put_hcd(xhci->shared_hcd);
--
2.8.1
next prev parent reply other threads:[~2016-04-26 12:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-26 12:57 [RESEND PATCH v2 0/7] usb: xhci-plat: support generic PHY and vbus regulator Jisheng Zhang
2016-04-26 12:57 ` [RESEND PATCH v2 1/7] usb: xhci: plat: Fix suspend/resume when the optional clk exists Jisheng Zhang
2016-04-27 5:25 ` Felipe Balbi
2016-04-27 5:46 ` Jisheng Zhang
2016-04-26 12:57 ` Jisheng Zhang [this message]
2016-04-27 5:29 ` [RESEND PATCH v2 2/7] usb: xhci: plat: attach the usb_phy to the correct hcd Felipe Balbi
2016-04-27 5:59 ` Jisheng Zhang
2016-04-27 6:19 ` Felipe Balbi
2016-04-26 12:57 ` [RESEND PATCH v2 3/7] usb: xhci: plat: Fix suspend/resume when the optional usb_phy exists Jisheng Zhang
2016-04-27 5:30 ` Felipe Balbi
2016-04-26 12:57 ` [RESEND PATCH v2 4/7] usb: xhci: plat: sort the headers in alphabetic order Jisheng Zhang
2016-04-26 12:57 ` [RESEND PATCH v2 5/7] usb: xhci: plat: Remove checks for optional clock in error/remove path Jisheng Zhang
2016-04-27 5:33 ` Felipe Balbi
2016-04-27 6:33 ` Jisheng Zhang
2016-04-27 7:19 ` Felipe Balbi
2016-04-26 12:57 ` [RESEND PATCH v2 6/7] usb: xhci: plat: add generic PHY support Jisheng Zhang
2016-04-27 5:35 ` Felipe Balbi
2016-04-27 6:46 ` Jisheng Zhang
2016-04-27 7:21 ` Felipe Balbi
2016-04-27 7:57 ` Heikki Krogerus
2016-04-27 9:34 ` Felipe Balbi
2016-04-26 12:57 ` [RESEND PATCH v2 7/7] usb: xhci: plat: add vbus regulator control Jisheng Zhang
2016-04-27 5:37 ` Felipe Balbi
2016-04-27 9:57 ` Mark Brown
2016-04-27 10:25 ` Jisheng Zhang
2016-04-27 13:24 ` Mark Brown
2016-04-27 10:25 ` Felipe Balbi
2016-04-27 10:35 ` Mark Brown
2016-04-27 10:38 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461675460-2295-3-git-send-email-jszhang@marvell.com \
--to=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).