From mboxrd@z Thu Jan 1 00:00:00 1970 From: fcooper@ti.com (Franklin S Cooper Jr) Date: Tue, 26 Apr 2016 17:36:43 -0500 Subject: [PATCH v7 3/9] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name In-Reply-To: <1461710209-6563-1-git-send-email-fcooper@ti.com> References: <1461710209-6563-1-git-send-email-fcooper@ti.com> Message-ID: <1461710209-6563-4-git-send-email-fcooper@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that the node name has been changed from ehrpwm to pwm the document should show this proper usage. Also change the unit address in the example from 0 to the proper physical address value that should be used. Signed-off-by: Franklin S Cooper Jr Acked-by: Rob Herring --- Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt index 99b544f..cbc538b 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt @@ -16,21 +16,21 @@ Optional properties: Example: -ehrpwm0: ehrpwm at 0 { /* EHRPWM on am33xx */ +ehrpwm0: pwm at 48300200 { /* EHRPWM on am33xx */ compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x100>; ti,hwmods = "ehrpwm0"; }; -ehrpwm0: ehrpwm at 0 { /* EHRPWM on am4372 */ +ehrpwm0: pwm at 48300200 { /* EHRPWM on am4372 */ compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; ti,hwmods = "ehrpwm0"; }; -ehrpwm0: ehrpwm at 0 { /* EHRPWM on da850 */ +ehrpwm0: pwm at 1f00000 { /* EHRPWM on da850 */ compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; -- 2.7.0