From: james.morse@arm.com (James Morse)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 04/14] arm64: hyp/kvm: Make hyp-stub extensible
Date: Wed, 27 Apr 2016 17:47:03 +0100 [thread overview]
Message-ID: <1461775633-29715-5-git-send-email-james.morse@arm.com> (raw)
In-Reply-To: <1461775633-29715-1-git-send-email-james.morse@arm.com>
From: Geoff Levand <geoff@infradead.org>
The existing arm64 hcall implementations are limited in that they only
allow for two distinct hcalls; with the x0 register either zero or not
zero. Also, the API of the hyp-stub exception vector routines and the
KVM exception vector routines differ; hyp-stub uses a non-zero value in
x0 to implement __hyp_set_vectors, whereas KVM uses it to implement
kvm_call_hyp.
To allow for additional hcalls to be defined and to make the arm64 hcall
API more consistent across exception vector routines, change the hcall
implementations to reserve all x0 values below 0xfff for hcalls such
as {s,g}et_vectors().
Define two new preprocessor macros HVC_GET_VECTORS, and HVC_SET_VECTORS
to be used as hcall type specifiers and convert the existing
__hyp_get_vectors() and __hyp_set_vectors() routines to use these new
macros when executing an HVC call. Also, change the corresponding
hyp-stub and KVM el1_sync exception vector routines to use these new
macros.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Merged two hcall patches, moved immediate value from esr to x0, use lr
as a scratch register, changed limit to 0xfff]
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/include/asm/virt.h | 16 ++++++++++++++++
arch/arm64/kernel/hyp-stub.S | 34 ++++++++++++++++++++++++----------
arch/arm64/kvm/hyp.S | 4 ++--
arch/arm64/kvm/hyp/hyp-entry.S | 4 ++--
4 files changed, 44 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index a5c2b4852154..dcbcf8dcbefb 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -18,6 +18,22 @@
#ifndef __ASM__VIRT_H
#define __ASM__VIRT_H
+/*
+ * The arm64 hcall implementation uses x0 to specify the hcall type. A value
+ * less than 0xfff indicates a special hcall, such as get/set vector.
+ * Any other value is used as a pointer to the function to call.
+ */
+
+/* HVC_GET_VECTORS - Return the value of the vbar_el2 register. */
+#define HVC_GET_VECTORS 0
+
+/*
+ * HVC_SET_VECTORS - Set the value of the vbar_el2 register.
+ *
+ * @x1: Physical address of the new vector table.
+ */
+#define HVC_SET_VECTORS 1
+
#define BOOT_CPU_MODE_EL1 (0xe11)
#define BOOT_CPU_MODE_EL2 (0xe12)
diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S
index 7eab8acbbbd9..894fb40fb378 100644
--- a/arch/arm64/kernel/hyp-stub.S
+++ b/arch/arm64/kernel/hyp-stub.S
@@ -22,6 +22,7 @@
#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
+#include <asm/kvm_arm.h>
#include <asm/ptrace.h>
#include <asm/virt.h>
@@ -53,15 +54,26 @@ ENDPROC(__hyp_stub_vectors)
.align 11
el1_sync:
- mrs x1, esr_el2
- lsr x1, x1, #26
- cmp x1, #0x16
- b.ne 2f // Not an HVC trap
- cbz x0, 1f
- msr vbar_el2, x0 // Set vbar_el2
- b 2f
-1: mrs x0, vbar_el2 // Return vbar_el2
-2: eret
+ mrs x30, esr_el2
+ lsr x30, x30, #ESR_ELx_EC_SHIFT
+
+ cmp x30, #ESR_ELx_EC_HVC64
+ b.ne 9f // Not an HVC trap
+
+ cmp x0, #HVC_GET_VECTORS
+ b.ne 1f
+ mrs x0, vbar_el2
+ b 9f
+
+1: cmp x0, #HVC_SET_VECTORS
+ b.ne 2f
+ msr vbar_el2, x1
+ b 9f
+
+ /* Unrecognised call type */
+2: mov x0, xzr
+
+9: eret
ENDPROC(el1_sync)
.macro invalid_vector label
@@ -102,7 +114,7 @@ ENDPROC(\label)
ENTRY(__hyp_get_vectors)
str lr, [sp, #-16]!
- mov x0, xzr
+ mov x0, #HVC_GET_VECTORS
hvc #0
ldr lr, [sp], #16
ret
@@ -110,6 +122,8 @@ ENDPROC(__hyp_get_vectors)
ENTRY(__hyp_set_vectors)
str lr, [sp, #-16]!
+ mov x1, x0
+ mov x0, #HVC_SET_VECTORS
hvc #0
ldr lr, [sp], #16
ret
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 4ee5612f43ea..7ce931565151 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -35,8 +35,8 @@
* in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are
* passed in x0.
*
- * A function pointer with a value of 0 has a special meaning, and is
- * used to implement __hyp_get_vectors in the same way as in
+ * A function pointer with a value less than 0xfff has a special meaning,
+ * and is used to implement __hyp_get_vectors in the same way as in
* arch/arm64/kernel/hyp_stub.S.
* HVC behaves as a 'bl' call and will clobber lr.
*/
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index 43b4b28159d9..2d87f36d5cb4 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -82,8 +82,8 @@ alternative_endif
/* Here, we're pretty sure the host called HVC. */
restore_x0_to_x3
- /* Check for __hyp_get_vectors */
- cbnz x0, 1f
+ cmp x0, #HVC_GET_VECTORS
+ b.ne 1f
mrs x0, vbar_el2
b 2f
--
2.8.0.rc3
next prev parent reply other threads:[~2016-04-27 16:47 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-27 16:46 [PATCH v9 00/14] arm64: kernel: Add support for hibernate/suspend-to-disk James Morse
2016-04-27 16:47 ` [PATCH v9 01/14] arm64: Fold proc-macros.S into assembler.h James Morse
2016-04-27 16:47 ` [PATCH v9 02/14] arm64: Cleanup SCTLR flags James Morse
2016-04-27 16:47 ` [PATCH v9 03/14] arm64: kvm: Move lr save/restore from do_el2_call into EL1 James Morse
2016-04-27 16:47 ` James Morse [this message]
2016-04-27 16:47 ` [PATCH v9 05/14] arm64: hyp/kvm: Make hyp-stub reject kvm_call_hyp() James Morse
2016-04-27 16:47 ` [PATCH v9 06/14] arm64: kvm: allows kvm cpu hotplug James Morse
2016-04-27 16:47 ` [PATCH v9 07/14] arm64: kernel: Rework finisher callback out of __cpu_suspend_enter() James Morse
2016-04-27 16:47 ` [PATCH v9 08/14] arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va James Morse
2016-04-27 16:47 ` [PATCH v9 09/14] arm64: kernel: Include _AC definition in page.h James Morse
2016-04-27 16:47 ` [PATCH v9 10/14] arm64: Promote KERNEL_START/KERNEL_END definitions to a header file James Morse
2016-04-27 16:47 ` [PATCH v9 11/14] arm64: Add new asm macro copy_page James Morse
2016-04-27 16:47 ` [PATCH v9 12/14] PM / Hibernate: Call flush_icache_range() on pages restored in-place James Morse
2016-04-28 12:15 ` Will Deacon
2016-04-28 12:23 ` James Morse
2016-04-28 12:27 ` Will Deacon
2016-04-27 16:47 ` [PATCH v9 13/14] arm64: kernel: Add support for hibernate/suspend-to-disk James Morse
2016-04-28 9:26 ` Catalin Marinas
2016-04-27 16:47 ` [PATCH v9 14/14] arm64: hibernate: Refuse to hibernate if the boot cpu is offline James Morse
2016-04-28 12:40 ` [PATCH v9 00/14] arm64: kernel: Add support for hibernate/suspend-to-disk Will Deacon
2016-04-28 17:31 ` James Morse
2016-04-28 18:37 ` Will Deacon
2016-04-29 17:27 ` [PATCH] arm64: kvm: Fix kvm teardown for systems using the extended idmap James Morse
2016-05-02 12:05 ` Marc Zyngier
2016-05-03 8:36 ` Christoffer Dall
2016-05-03 8:41 ` Marc Zyngier
2016-05-03 8:57 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461775633-29715-5-git-send-email-james.morse@arm.com \
--to=james.morse@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).