From: ddaney.cavm@gmail.com (David Daney)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 11/14] acpi, numa: Move acpi_numa_memory_affinity_init() to drivers/acpi/numa.c
Date: Wed, 27 Apr 2016 11:07:13 -0700 [thread overview]
Message-ID: <1461780436-27182-12-git-send-email-ddaney.cavm@gmail.com> (raw)
In-Reply-To: <1461780436-27182-1-git-send-email-ddaney.cavm@gmail.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
acpi_numa_memory_affinity_init() will be reused by arm64. Move it to
drivers/acpi/numa.c to facilitate reuse.
No code change.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/x86/mm/srat.c | 57 --------------------------------------------------
drivers/acpi/numa.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+), 57 deletions(-)
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 30460f5..b1ecff4 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -15,8 +15,6 @@
#include <linux/bitmap.h>
#include <linux/module.h>
#include <linux/topology.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
#include <linux/mm.h>
#include <asm/proto.h>
#include <asm/numa.h>
@@ -104,61 +102,6 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
pxm, apic_id, node);
}
-/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
-int __init
-acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
-{
- u64 start, end;
- u32 hotpluggable;
- int node, pxm;
-
- if (srat_disabled())
- goto out_err;
- if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
- goto out_err_bad_srat;
- if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
- goto out_err;
- hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
- if (hotpluggable && !IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
- goto out_err;
-
- start = ma->base_address;
- end = start + ma->length;
- pxm = ma->proximity_domain;
- if (acpi_srat_revision <= 1)
- pxm &= 0xff;
-
- node = acpi_map_pxm_to_node(pxm);
- if (node < 0) {
- printk(KERN_ERR "SRAT: Too many proximity domains.\n");
- goto out_err_bad_srat;
- }
-
- if (numa_add_memblk(node, start, end) < 0)
- goto out_err_bad_srat;
-
- node_set(node, numa_nodes_parsed);
-
- pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n",
- node, pxm,
- (unsigned long long) start, (unsigned long long) end - 1,
- hotpluggable ? " hotplug" : "",
- ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : "");
-
- /* Mark hotplug range in memblock. */
- if (hotpluggable && memblock_mark_hotplug(start, ma->length))
- pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n",
- (unsigned long long)start, (unsigned long long)end - 1);
-
- max_possible_pfn = max(max_possible_pfn, PFN_UP(end - 1));
-
- return 0;
-out_err_bad_srat:
- bad_srat();
-out_err:
- return -EINVAL;
-}
-
int __init x86_acpi_numa_init(void)
{
int ret;
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index f6fd87c..d7d0499 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -27,6 +27,8 @@
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
#include <linux/numa.h>
#include <linux/nodemask.h>
#include <linux/topology.h>
@@ -236,6 +238,64 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
}
}
}
+
+/*
+ * Default callback for parsing of the Proximity Domain <-> Memory
+ * Area mappings
+ */
+int __init
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
+{
+ u64 start, end;
+ u32 hotpluggable;
+ int node, pxm;
+
+ if (srat_disabled())
+ goto out_err;
+ if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
+ goto out_err_bad_srat;
+ if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
+ goto out_err;
+ hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
+ if (hotpluggable && !IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
+ goto out_err;
+
+ start = ma->base_address;
+ end = start + ma->length;
+ pxm = ma->proximity_domain;
+ if (acpi_srat_revision <= 1)
+ pxm &= 0xff;
+
+ node = acpi_map_pxm_to_node(pxm);
+ if (node < 0) {
+ printk(KERN_ERR "SRAT: Too many proximity domains.\n");
+ goto out_err_bad_srat;
+ }
+
+ if (numa_add_memblk(node, start, end) < 0)
+ goto out_err_bad_srat;
+
+ node_set(node, numa_nodes_parsed);
+
+ pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n",
+ node, pxm,
+ (unsigned long long) start, (unsigned long long) end - 1,
+ hotpluggable ? " hotplug" : "",
+ ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : "");
+
+ /* Mark hotplug range in memblock. */
+ if (hotpluggable && memblock_mark_hotplug(start, ma->length))
+ pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n",
+ (unsigned long long)start, (unsigned long long)end - 1);
+
+ max_possible_pfn = max(max_possible_pfn, PFN_UP(end - 1));
+
+ return 0;
+out_err_bad_srat:
+ bad_srat();
+out_err:
+ return -EINVAL;
+}
#endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */
static int __init acpi_parse_slit(struct acpi_table_header *table)
--
1.7.11.7
next prev parent reply other threads:[~2016-04-27 18:07 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-27 18:07 [PATCH v6 00/14] ACPI NUMA support for ARM64 David Daney
2016-04-27 18:07 ` [PATCH v6 01/14] acpi, numa: Use pr_fmt() instead of printk David Daney
2016-04-27 18:07 ` [PATCH v6 02/14] acpi, numa: Replace ACPI_DEBUG_PRINT() with pr_debug() David Daney
2016-04-27 18:07 ` [PATCH v6 03/14] acpi, numa: remove duplicate NULL check David Daney
2016-04-27 18:07 ` [PATCH v6 04/14] acpi, numa: Move acpi_numa_arch_fixup() to ia64 only David Daney
2016-04-27 18:07 ` [PATCH v6 05/14] acpi, numa: move acpi_numa_slit_init() to drivers/acpi/numa.c David Daney
2016-04-27 18:07 ` [PATCH v6 06/14] arm64, numa: rework numa_add_memblk() David Daney
2016-05-11 9:12 ` Catalin Marinas
2016-04-27 18:07 ` [PATCH v6 07/14] arm64, numa: Cleanup NUMA disabled messages David Daney
2016-05-11 9:12 ` Catalin Marinas
2016-04-27 18:07 ` [PATCH v6 08/14] x86, acpi, numa: cleanup acpi_numa_processor_affinity_init() David Daney
2016-04-27 18:07 ` [PATCH v6 09/14] acpi, numa: move bad_srat() and srat_disabled() to drivers/acpi/numa.c David Daney
2016-04-27 18:07 ` [PATCH v6 10/14] acpi, numa: remove unneeded acpi_numa=1 David Daney
2016-04-27 18:07 ` David Daney [this message]
2016-04-27 18:07 ` [PATCH v6 12/14] acpi, numa, srat: Improve SRAT error detection and add messages David Daney
2016-04-27 18:07 ` [PATCH v6 13/14] arm64, acpi, numa: NUMA support based on SRAT and SLIT David Daney
2016-05-11 10:39 ` Catalin Marinas
2016-05-12 0:06 ` David Daney
2016-05-12 1:03 ` Hanjun Guo
2016-05-12 9:49 ` Catalin Marinas
2016-05-12 15:27 ` David Daney
2016-05-12 16:24 ` Catalin Marinas
2016-05-12 20:40 ` David Daney
2016-04-27 18:07 ` [PATCH v6 14/14] acpi, numa: Enable ACPI based NUMA on ARM64 David Daney
2016-05-11 10:40 ` Catalin Marinas
2016-05-11 0:43 ` [PATCH v6 00/14] ACPI NUMA support for ARM64 Rafael J. Wysocki
2016-05-11 10:40 ` Will Deacon
2016-05-11 20:35 ` Rafael J. Wysocki
2016-05-11 21:08 ` David Daney
2016-05-11 21:22 ` Rafael J. Wysocki
2016-05-11 21:30 ` David Daney
2016-05-11 22:29 ` Rafael J. Wysocki
2016-05-12 8:56 ` Will Deacon
2016-05-12 12:54 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461780436-27182-12-git-send-email-ddaney.cavm@gmail.com \
--to=ddaney.cavm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).