From mboxrd@z Thu Jan 1 00:00:00 1970 From: stefan@agner.ch (Stefan Agner) Date: Thu, 28 Apr 2016 14:07:03 -0700 Subject: [PATCH] clk: imx: fix ahb clock mux 1 Message-ID: <1461877623-26838-1-git-send-email-stefan@agner.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The clock parent of the AHB root clock when using mux option 1 is the SYS PLL 270MHz clock. This is specified in Table 5-11 Clock Root Table of the i.MX 7Dual Applications Processor Reference Manual. While it could be a documentation error, the 270MHz parent is also mentioned in the boot ROM configuration in Table 6-28: The clock is by default at 135MHz due to a POST_PODF value of 1 (=> divider of 2). Signed-off-by: Stefan Agner --- Hi Shawn, I did not found a clock which was based on this clock which I could measure externally... But the change is backed by the documentation. -- Stefan drivers/clk/imx/clk-imx7d.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c index 7912be8..5229968 100644 --- a/drivers/clk/imx/clk-imx7d.c +++ b/drivers/clk/imx/clk-imx7d.c @@ -56,7 +56,7 @@ static const char *nand_usdhc_bus_sel[] = { "osc", "pll_sys_pfd2_270m_clk", "pll_sys_pfd2_135m_clk", "pll_sys_pfd6_clk", "pll_enet_250m_clk", "pll_audio_main_clk", }; -static const char *ahb_channel_sel[] = { "osc", "pll_sys_pfd2_135m_clk", +static const char *ahb_channel_sel[] = { "osc", "pll_sys_pfd2_270m_clk", "pll_dram_533m_clk", "pll_sys_pfd0_392m_clk", "pll_enet_125m_clk", "pll_usb_main_clk", "pll_audio_main_clk", "pll_video_main_clk", }; -- 2.8.0