[GIT PULL 1/6] i.MX soc updates for 4.7

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* [GIT PULL 1/6] i.MX soc updates for 4.7
@ 2016-05-03 15:58 Shawn Guo
  2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
                   ` (5 more replies)
  0 siblings, 6 replies; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
  To: linux-arm-kernel

The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.7

for you to fetch changes up to acc98009b87a811f9f815650274a1044474cd167:

  ARM: imx: always use TWD on IMX6Q (2016-04-12 15:56:55 +0800)

----------------------------------------------------------------
The i.MX SoC updates for 4.7:
 - Allow TWD to be used on UP kernel, as the PREEMPT-RT and cyclictest
   shows that TWD has a slightly better performance than i.MX timer.

----------------------------------------------------------------
Sebastian Andrzej Siewior (1):
      ARM: imx: always use TWD on IMX6Q

 arch/arm/mach-imx/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks
  2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
  2016-05-10 14:16   ` Arnd Bergmann
  2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
  To: linux-arm-kernel

Hi arm-soc folks,

As per request from Arnd, I collected the device tree updates with new
clock ID dependency on a separate branch imx/dt-clkdep.  The dependant
clock changes has been pulled by clk folks.

Please pull, thanks.

Shawn


The following changes since commit 7b5ca4533f1ac023a16e44a2a1680121272723f9:

  Merge tag 'imx-clk-4.7' into imx/dt-clkdep (2016-04-13 17:36:03 +0800)

are available in the git repository at:


  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-clkdep-4.7

for you to fetch changes up to 77f0862d0d6874a73f83032b7ffd6d204fc8646c:

  ARM: dts: vf610-colibri: enable display controller (2016-04-13 17:42:47 +0800)

----------------------------------------------------------------
The i.MX device tree updates with new clocks for 4.7:
 - Add LCDIF and FlexCAN device support for i.MX7D
 - New support i.MX7D based Nitrogen7 board from Boundary Devices
 - Add display support for vf610-colibri board

----------------------------------------------------------------
Gary Bisson (3):
      ARM: dts: imx7d: add lcdif support
      ARM: dts: imx7d: add flexcan support
      ARM: dts: imx: add Boundary Devices Nitrogen7 board

Stefan Agner (2):
      ARM: dts: vf610: add display nodes
      ARM: dts: vf610-colibri: enable display controller

 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/imx7d-nitrogen7.dts     | 745 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx7d.dtsi              |  31 ++
 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi |  16 +
 arch/arm/boot/dts/vf-colibri.dtsi         |  33 ++
 arch/arm/boot/dts/vfxxx.dtsi              |  19 +
 6 files changed, 845 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks
  2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
@ 2016-05-10 14:16   ` Arnd Bergmann
  0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 14:16 UTC (permalink / raw)
  To: linux-arm-kernel

On Tuesday 03 May 2016 23:58:02 Shawn Guo wrote:
> The i.MX device tree updates with new clocks for 4.7:
>  - Add LCDIF and FlexCAN device support for i.MX7D
>  - New support i.MX7D based Nitrogen7 board from Boundary Devices
>  - Add display support for vf610-colibri board
> 

I've pulled it into the next/late branch, we'll send that on once the
drivers/clk changes are merged.

Thanks,

	Arnd

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2
  2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
  2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
  2016-05-10 13:46   ` Arnd Bergmann
  2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
                   ` (3 subsequent siblings)
  5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
  To: linux-arm-kernel

Hi arm-soc folks,

This is the second round of my imx/dt branch pull request.  It's based
on the first take [1], which has been pulled some days ago.

Please pull, thanks.

Shawn

[1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/493365


The following changes since commit 880e1509db9732d5696d2a092e9bd61d80ad00be:

  ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support (2016-04-18 12:54:21 +0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.7-2

for you to fetch changes up to 194521f72380d0e78caa71013e9e7de1703d8c85:

  ARM: mx5: dts: Enable USB OTG on M53EVK (2016-05-03 21:10:11 +0800)

----------------------------------------------------------------
The i.MX device tree updates for 4.7, take 2:
 - Update display clock configuration for imx6q-b850v3 board
 - Use watchdog external reset for imx6q-ba16 board
 - Update operating points settings for i.MX6UL/SX/DL
 - New board support: imx6ul-pico-hobbit and imx6q-marsboard
 - Add SAI audio support for imx6ul-14x14-evk board
 - Enable USB OTG support for M53EVK board
 - A couple of fixes on DTC warnings

----------------------------------------------------------------
Akshay Bhat (4):
      ARM: dts: imx6q-b850v3: Remove ldb panel
      ARM: dts: imx6q-b850v3: Update display clock source
      ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment
      ARM: dts: imx6q-ba16: use wdog external reset

Fabio Estevam (9):
      ARM: dts: imx6ul: Fix operating points
      ARM: dts: imx6sx: Add 198MHz operating point
      ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
      ARM: dts: imx6: Do not hardcode the CLKO clock
      ARM: dts: imx6ul-pico-hobbit: Add initial support
      ARM: dts: imx28-m28: Remove unneeded partition nodes
      ARM: dts: imx6sx-sdb: Add 198MHz operational point
      ARM: dts: imx6qdl: Remove unneeded unit-addresses
      ARM: dts: imx6ul-14x14-evk: Add audio support

Joshua Clayton (1):
      ARM: dts: imx6: fix dtc warnings for ipu endpoints

Marcel Ziswiler (1):
      ARM: dts: imx6: apalis: parallel lcd display support on ixora

Marek Vasut (1):
      ARM: mx5: dts: Enable USB OTG on M53EVK

Sergio Prado (1):
      ARM: dts: imx6: Add dts for Embest MarS Board

 arch/arm/boot/dts/Makefile                   |   2 +
 arch/arm/boot/dts/imx28-m28.dtsi             |  26 --
 arch/arm/boot/dts/imx53-m53evk.dts           |  21 +-
 arch/arm/boot/dts/imx6dl-riotboard.dts       |   2 +-
 arch/arm/boot/dts/imx6dl.dtsi                |   2 +-
 arch/arm/boot/dts/imx6q-apalis-ixora.dts     |  45 +++
 arch/arm/boot/dts/imx6q-b450v3.dts           |   5 +-
 arch/arm/boot/dts/imx6q-b650v3.dts           |   5 +-
 arch/arm/boot/dts/imx6q-b850v3.dts           |  33 +-
 arch/arm/boot/dts/imx6q-ba16.dtsi            |   1 +
 arch/arm/boot/dts/imx6q-gw5400-a.dts         |   2 +-
 arch/arm/boot/dts/imx6q-marsboard.dts        | 403 +++++++++++++++++++++
 arch/arm/boot/dts/imx6q-tbs2910.dts          |   2 +-
 arch/arm/boot/dts/imx6q.dtsi                 |  18 +-
 arch/arm/boot/dts/imx6qdl-apalis.dtsi        |   2 +-
 arch/arm/boot/dts/imx6qdl-apf6dev.dtsi       |   2 +-
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi        |   2 +-
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi        |   2 +-
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi        |   2 +-
 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi     |   2 +-
 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi |   2 +-
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi    |   2 +-
 arch/arm/boot/dts/imx6qdl-rex.dtsi           |   2 +-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi     |   2 +-
 arch/arm/boot/dts/imx6qdl-udoo.dtsi          |   2 +-
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi     |   2 +-
 arch/arm/boot/dts/imx6qdl.dtsi               |  32 +-
 arch/arm/boot/dts/imx6sx-sdb.dts             |   2 +
 arch/arm/boot/dts/imx6sx.dtsi                |   2 +
 arch/arm/boot/dts/imx6ul-14x14-evk.dts       |  74 ++++
 arch/arm/boot/dts/imx6ul-pico-hobbit.dts     | 516 +++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6ul.dtsi                |  12 +-
 32 files changed, 1130 insertions(+), 99 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6q-marsboard.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-pico-hobbit.dts

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2
  2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
@ 2016-05-10 13:46   ` Arnd Bergmann
  0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 13:46 UTC (permalink / raw)
  To: linux-arm-kernel

On Tuesday 03 May 2016 23:58:03 Shawn Guo wrote:
> The i.MX device tree updates for 4.7, take 2:
>  - Update display clock configuration for imx6q-b850v3 board
>  - Use watchdog external reset for imx6q-ba16 board
>  - Update operating points settings for i.MX6UL/SX/DL
>  - New board support: imx6ul-pico-hobbit and imx6q-marsboard
>  - Add SAI audio support for imx6ul-14x14-evk board
>  - Enable USB OTG support for M53EVK board
>  - A couple of fixes on DTC warnings
> 

Merged into next/dt, thanks!

	Arnd

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7
  2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
  2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
  2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
  2016-05-10 20:20   ` Arnd Bergmann
  2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
                   ` (2 subsequent siblings)
  5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
  To: linux-arm-kernel

The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.7

for you to fetch changes up to bb4b4e93febc139003e2af2f36e438df58b4803c:

  arm64: dts: ls2080a: fsl-mc dt node updates (2016-04-26 11:25:44 +0800)

----------------------------------------------------------------
The Freescale/NXP arm64 device tree updates for 4.7:
 - New board support of LS1043a-QDS from Freescale/NXP
 - Add new compatible for LS1043A and LS2080A GPIO devices
 - Update device tree bindings and sources for LS2080A fsl-mc device
 - Update QSPI and DSPI support on LS1043A and LS2080A

----------------------------------------------------------------
Hou Zhiqiang (1):
      Documentation: DT: Add entry for Freescale LS1043a-QDS board

Liu Gang (2):
      arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
      arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes

Shaohui Xie (1):
      arm64: dts: add LS1043a-QDS board support

Stuart Yoder (2):
      Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs
      arm64: dts: ls2080a: fsl-mc dt node updates

Yuan Yao (4):
      Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string
      arm64: dts: ls2080a: update the DTS for QSPI and DSPI support
      Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string
      arm64: dts: ls1043a: add the DTS node for QSPI support

Yunhui Cui (1):
      arm64: dts: ls1043a-rdb: add the DTS for DSPI support

 Documentation/devicetree/bindings/arm/fsl.txt      |   4 +
 .../devicetree/bindings/misc/fsl,qoriq-mc.txt      |  81 ++++++++-
 .../devicetree/bindings/mtd/fsl-quadspi.txt        |   3 +-
 .../devicetree/bindings/spi/spi-fsl-dspi.txt       |   5 +-
 arch/arm64/boot/dts/freescale/Makefile             |   3 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts  | 181 +++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts  |  13 ++
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi     |  22 ++-
 arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts  |   9 +-
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi     | 110 ++++++++++++-
 10 files changed, 416 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7
  2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
@ 2016-05-10 20:20   ` Arnd Bergmann
  0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 20:20 UTC (permalink / raw)
  To: linux-arm-kernel

On Tuesday 03 May 2016 23:58:04 Shawn Guo wrote:
> The Freescale/NXP arm64 device tree updates for 4.7:
>  - New board support of LS1043a-QDS from Freescale/NXP
>  - Add new compatible for LS1043A and LS2080A GPIO devices
>  - Update device tree bindings and sources for LS2080A fsl-mc device
>  - Update QSPI and DSPI support on LS1043A and LS2080A
> 
> 

Pulled into next/dt64, thanks!

	Arnd

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 5/6] i.MX defconfig updates for 4.7
  2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
                   ` (2 preceding siblings ...)
  2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
  2016-05-10 12:09   ` Arnd Bergmann
  2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
  2016-05-09 14:10 ` [GIT PULL 1/6] i.MX soc " Arnd Bergmann
  5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
  To: linux-arm-kernel

The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.7

for you to fetch changes up to 2ead04d9d69ebded61da063cb5a8ade72da6c8f5:

  ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY (2016-05-03 20:58:07 +0800)

----------------------------------------------------------------
The i.MX defconfig updates for 4.7:
 - Update multi_v5_defconfig for i.MX21/27 and systemd support
 - Update imx_v6_v7_defconfig to support devices found on various i.MX6
   board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC

----------------------------------------------------------------
Gary Bisson (3):
      ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
      ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
      ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80

Jan Luebbe (2):
      ARM: multi_v5_defconfig: Enable support for MX21/MX27
      ARM: multi_v5_defconfig: Enable recommended options for systemd

Marcel Ziswiler (2):
      ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
      ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY

 arch/arm/configs/imx_v6_v7_defconfig |  6 ++++++
 arch/arm/configs/multi_v5_defconfig  | 21 ++++++++++++++++++---
 2 files changed, 24 insertions(+), 3 deletions(-)

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 5/6] i.MX defconfig updates for 4.7
  2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
@ 2016-05-10 12:09   ` Arnd Bergmann
  0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 12:09 UTC (permalink / raw)
  To: linux-arm-kernel

On Tuesday 03 May 2016 23:58:05 Shawn Guo wrote:
> The i.MX defconfig updates for 4.7:
>  - Update multi_v5_defconfig for i.MX21/27 and systemd support
>  - Update imx_v6_v7_defconfig to support devices found on various i.MX6
>    board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC
> 

Merged into next/defconfig, thanks!

	Arnd

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 6/6] Freescale/NXP arm64 defconfig updates for 4.7
  2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
                   ` (3 preceding siblings ...)
  2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
  2016-05-10 12:35   ` Arnd Bergmann
  2016-05-09 14:10 ` [GIT PULL 1/6] i.MX soc " Arnd Bergmann
  5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
  To: linux-arm-kernel

Hi arm-soc folks,

Different from above 5 pull requests that start off 4.6-rc1, this one
is based on 4.6-rc2, because commit 431597bb9556 ("arm64: defconfig:
updates for 4.6") changes arch/arm64/configs/defconfig dramatically
and went into 4.6-rc2.  I have to base my branch onto 4.6-rc2 to avoid
manual merging.

Please pull, thanks.

Shawn


The following changes since commit 9735a22799b9214d17d3c231fe377fc852f042e9:

  Linux 4.6-rc2 (2016-04-03 09:09:40 -0500)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig64-4.7

for you to fetch changes up to 3892132c2716e2747e562dd9a4c025387c19c329:

  arm64: defconfig: enable freescale/nxp config options (2016-04-27 10:12:34 +0800)

----------------------------------------------------------------
The arm64 defconfig update for Freescale/NXP support:
 - Clean up defconfig with savedefconfig
 - Enable 48-bit virtual address support
 - Enable driver support for various Freescale/NXP devices

----------------------------------------------------------------
Stuart Yoder (3):
      arm64: defconfig: cleanup the defconfig
      arm64: defconfig: enable 48-bit virtual addresses
      arm64: defconfig: enable freescale/nxp config options

 arch/arm64/configs/defconfig | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 6/6] Freescale/NXP arm64 defconfig updates for 4.7
  2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
@ 2016-05-10 12:35   ` Arnd Bergmann
  0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 12:35 UTC (permalink / raw)
  To: linux-arm-kernel

On Tuesday 03 May 2016 23:58:06 Shawn Guo wrote:
> Different from above 5 pull requests that start off 4.6-rc1, this one
> is based on 4.6-rc2, because commit 431597bb9556 ("arm64: defconfig:
> updates for 4.6") changes arch/arm64/configs/defconfig dramatically
> and went into 4.6-rc2.  I have to base my branch onto 4.6-rc2 to avoid
> manual merging.
> 

Sure, no problem. As you could tell from our git tree, we are already on
rc3 with the next/arm64 branch, so there is no backmerge.

Pulled into next/arm64 now, thanks!

	Arnd

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL 1/6] i.MX soc updates for 4.7
  2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
                   ` (4 preceding siblings ...)
  2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
@ 2016-05-09 14:10 ` Arnd Bergmann
  5 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-09 14:10 UTC (permalink / raw)
  To: linux-arm-kernel

On Tuesday 03 May 2016 23:58:01 Shawn Guo wrote:
> The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
> 
>   Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.7
> 
> for you to fetch changes up to acc98009b87a811f9f815650274a1044474cd167:
> 
>   ARM: imx: always use TWD on IMX6Q (2016-04-12 15:56:55 +0800)
> 
> ----------------------------------------------------------------
> The i.MX SoC updates for 4.7:
>  - Allow TWD to be used on UP kernel, as the PREEMPT-RT and cyclictest
>    shows that TWD has a slightly better performance than i.MX timer.
> 

Pulled into next/soc, thanks!

	Arnd

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2016-05-10 20:20 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
2016-05-10 14:16   ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
2016-05-10 13:46   ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
2016-05-10 20:20   ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
2016-05-10 12:09   ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
2016-05-10 12:35   ` Arnd Bergmann
2016-05-09 14:10 ` [GIT PULL 1/6] i.MX soc " Arnd Bergmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).