From mboxrd@z Thu Jan  1 00:00:00 1970
From: david.wu@rock-chips.com (David Wu)
Date: Wed,  4 May 2016 22:13:05 +0800
Subject: [PATCH v7 0/9] add i2c driver supported for rk3399
Message-ID: <1462371194-5809-1-git-send-email-david.wu@rock-chips.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

There are two points differert from others:
 - new method to caculate i2c timings for rk3399
 - pclk and function clk are separated at rk3399

David Wu (9):
  i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
  i2c: rk3x: use struct "rk3x_i2c_calced_timings"
  i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
  i2c: rk3x: Move setting STATE_START and add STATE_SETUP
  i2c: rk3x: Change SoC data to not use array
  i2c: rk3x: Move spec timing data to "static const" structs
  dt-bindings: i2c: rk3x: add support for rk3399
  i2c: rk3x: add i2c support for rk3399 soc
  i2c: rk3x: support fast-mode plus for rk3399

 Documentation/devicetree/bindings/i2c/i2c-rk3x.txt |  16 +-
 drivers/i2c/busses/i2c-rk3x.c                      | 482 +++++++++++++++++----
 2 files changed, 419 insertions(+), 79 deletions(-)

-- 
1.9.1