From mboxrd@z Thu Jan 1 00:00:00 1970 From: rnayak@codeaurora.org (Rajendra Nayak) Date: Thu, 5 May 2016 14:21:47 +0530 Subject: [PATCH v6 09/11] arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes In-Reply-To: <1462438309-11196-1-git-send-email-rnayak@codeaurora.org> References: <1462438309-11196-1-git-send-email-rnayak@codeaurora.org> Message-ID: <1462438309-11196-10-git-send-email-rnayak@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add thermal zones, tsens and qfprom nodes Cc: Andy Gross Signed-off-by: Rajendra Nayak --- arch/arm/boot/dts/qcom-apq8084.dtsi | 103 ++++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index a33a09f..5284709 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -86,6 +86,88 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip at 1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip at 1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip at 1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip at 1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; @@ -142,6 +224,27 @@ reg = <0xf9011000 0x1000>; }; + qfprom: qfprom at fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib at d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup at 440 { + reg = <0x440 0x10>; + }; + }; + + tsens: thermal-sensor at fc4a8000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a8000 0x2000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #thermal-sensor-cells = <1>; + }; + timer at f9020000 { #address-cells = <1>; #size-cells = <1>; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation