From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm64: Ensure pmd_present() returns false after pmd_mknotpresent()
Date: Thu, 5 May 2016 10:44:02 +0100 [thread overview]
Message-ID: <1462441442-6996-5-git-send-email-catalin.marinas@arm.com> (raw)
In-Reply-To: <1462441442-6996-1-git-send-email-catalin.marinas@arm.com>
Currently, pmd_present() only checks for a non-zero value, returning
true even after pmd_mknotpresent() (which only clears the type bits).
This patch converts pmd_present() to using pte_present(), similar to the
other pmd_*() checks. As a side effect, it will return true for
PROT_NONE mappings, though they are not yet used by the kernel with
transparent huge pages.
For consistency, also change pmd_mknotpresent() to only clear the
PMD_SECT_VALID bit, even though the PMD_TABLE_BIT is already 0 for block
mappings (no functional change). The unused PMD_SECT_PROT_NONE
definition is removed as transparent huge pages use the pte page prot
values.
Fixes: 9c7e535fcc17 ("arm64: mm: Route pmd thp functions through pte equivalents")
Cc: <stable@vger.kernel.org> # 3.15+
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/pgtable-hwdef.h | 1 -
arch/arm64/include/asm/pgtable.h | 4 ++--
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 5c25b831273d..9786f770088d 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -133,7 +133,6 @@
* Section
*/
#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 58)
#define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */
#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index a8b8f4eb7bff..7b2806812d95 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -300,6 +300,7 @@ static inline int pmd_protnone(pmd_t pmd)
#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#define pmd_present(pmd) pte_present(pmd_pte(pmd))
#define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd))
#define pmd_young(pmd) pte_young(pmd_pte(pmd))
#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd)))
@@ -308,7 +309,7 @@ static inline int pmd_protnone(pmd_t pmd)
#define pmd_mkclean(pmd) pte_pmd(pte_mkclean(pmd_pte(pmd)))
#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd)))
#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd)))
-#define pmd_mknotpresent(pmd) (__pmd(pmd_val(pmd) & ~PMD_TYPE_MASK))
+#define pmd_mknotpresent(pmd) (__pmd(pmd_val(pmd) & ~PMD_SECT_VALID))
#define __HAVE_ARCH_PMD_WRITE
#define pmd_write(pmd) pte_write(pmd_pte(pmd))
@@ -347,7 +348,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot);
#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_present(pmd) (pmd_val(pmd))
#define pmd_bad(pmd) (!(pmd_val(pmd) & PMD_TABLE_BIT))
prev parent reply other threads:[~2016-05-05 9:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 9:43 [PATCH 0/4] arm64: pmd accessor fixes Catalin Marinas
2016-05-05 9:43 ` [PATCH 1/4] arm64: Fix typo in the pmdp_huge_get_and_clear() definition Catalin Marinas
2016-05-05 9:44 ` [PATCH 2/4] arm64: Implement pmdp_set_access_flags() for hardware AF/DBM Catalin Marinas
2016-05-05 9:44 ` [PATCH 3/4] arm64: Replace hard-coded values in the pmd/pud_bad() macros Catalin Marinas
2016-05-05 9:44 ` Catalin Marinas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462441442-6996-5-git-send-email-catalin.marinas@arm.com \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).