From mboxrd@z Thu Jan 1 00:00:00 1970 From: appana.durga.rao@xilinx.com (Kedareswara rao Appana) Date: Thu, 12 May 2016 15:13:47 +0530 Subject: [RESEND PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas In-Reply-To: <1463046228-21651-1-git-send-email-appanad@xilinx.com> References: <1463046228-21651-1-git-send-email-appanad@xilinx.com> Message-ID: <1463046228-21651-3-git-send-email-appanad@xilinx.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch updates the binding doc with clock description for AXI DMA's. Acked-by: S?ren Brinkmann Signed-off-by: Kedareswara rao Appana --- .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index fcc2b65..a1f2683 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -21,6 +21,18 @@ Required properties: - dma-channel child node: Should have at least one channel and can have up to two channels per device. This node specifies the properties of each DMA channel (see child node properties below). +- clocks: Input clock specifier. Refer to common clock bindings. +- clock-names: List of input clocks + For VDMA: + Required elements: "s_axi_lite_aclk" + Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk", + "m_axis_mm2s_aclk", "s_axis_s2mm_aclk" + For CDMA: + Required elements: "s_axi_lite_aclk", "m_axi_aclk" + FOR AXIDMA: + Required elements: "s_axi_lite_aclk" + Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", + "m_axi_sg_aclk" Required properties for VDMA: - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. @@ -60,6 +72,9 @@ axi_vdma_0: axivdma at 40030000 { xlnx,num-fstores = <0x8>; xlnx,flush-fsync = <0x1>; xlnx,addrwidth = <0x20>; + clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>; + clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", + "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"; dma-channel at 40030000 { compatible = "xlnx,axi-vdma-mm2s-channel"; interrupts = < 0 54 4 >; -- 2.1.1