[PATCH v4 1/3] ARM64: dts: rockchip: make rk3399's grf a "simple-mfd"

[PATCH v4 1/3] ARM64: dts: rockchip: make rk3399's grf a "simple-mfd"

[Brian Norris]

Per the examples in
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt, we need the
grf node to be a simple-mfd in order to properly enumerate child devices
like our eMMC PHY.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---
v4:

 * New, split out of patch 2, per Heiko's recommendation

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 46f325a143b0..e1c3667a9bea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -481,8 +481,11 @@
 	};
 
 	grf: syscon at ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff770000 0x0 0x10000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
 	};
 
 	watchdog at ff840000 {
-- 
2.8.0.rc3.226.g39d4020

[PATCH v4 2/3] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Brian Norris]

Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
200 MHz, to support all supported timing modes.

Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
have a compliant Arasan controller, but let's have a rockchip property
as the canonical backup/precautionary measure. Per Heiko's previous
suggestion, let's not clutter the arasan doc with it.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---
v4:

 * split "simple-mfd" out into patch 1

v3:

 * correct emmc_phy reg length to 0x24

v2:

 * improved commit message
 * assign eMMC clock to 200 MHz

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index e1c3667a9bea..99078f5ebeb9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -215,6 +215,19 @@
 		status = "disabled";
 	};
 
+	sdhci: sdhci at fe330000 {
+		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+		reg = <0x0 0xfe330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb";
+		assigned-clocks = <&cru SCLK_EMMC>;
+		assigned-clock-rates = <200000000>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		status = "disabled";
+	};
+
 	usb_host0_ehci: usb at fe380000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe380000 0x0 0x20000>;
@@ -486,6 +499,13 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		emmc_phy: phy at f780 {
+			compatible = "rockchip,rk3399-emmc-phy";
+			reg = <0xf780 0x24>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
 	};
 
 	watchdog at ff840000 {
-- 
2.8.0.rc3.226.g39d4020

[PATCH v4 3/3] ARM64: dts: rockchip: enable eMMC for rk3399 EVB

[Brian Norris]

Rockchip's rk3399 evaluation board has eMMC. Let's enable the
newly-added nodes.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---
v4:

 * alphabetize &node references

v3:

 * no change

v2:

 * better commit description

 arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 1a3eb1482050..d33aa06d46f5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -77,6 +77,10 @@
 	};
 };
 
+&emmc_phy {
+	status = "okay";
+};
+
 &pwm0 {
 	status = "okay";
 };
@@ -89,6 +93,14 @@
 	status = "okay";
 };
 
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
-- 
2.8.0.rc3.226.g39d4020

[PATCH v4 1/3] ARM64: dts: rockchip: make rk3399's grf a "simple-mfd"

[Doug Anderson]

Hi,

On Fri, May 13, 2016 at 3:12 PM, Brian Norris <briannorris@chromium.org> wrote:
> Per the examples in
> Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt, we need the
> grf node to be a simple-mfd in order to properly enumerate child devices
> like our eMMC PHY.
>
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
> v4:
>
>  * New, split out of patch 2, per Heiko's recommendation
>
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

[PATCH v4 3/3] ARM64: dts: rockchip: enable eMMC for rk3399 EVB

[Doug Anderson]

Hi,

On Fri, May 13, 2016 at 3:12 PM, Brian Norris <briannorris@chromium.org> wrote:
> Rockchip's rk3399 evaluation board has eMMC. Let's enable the
> newly-added nodes.
>
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
> v4:
>
>  * alphabetize &node references
>
> v3:
>
>  * no change
>
> v2:
>
>  * better commit description
>
>  arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

[PATCH v4 1/3] ARM64: dts: rockchip: make rk3399's grf a "simple-mfd"

[Heiko Stuebner]

Am Freitag, 13. Mai 2016, 15:12:02 schrieb Brian Norris:
> Per the examples in
> Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt, we need the
> grf node to be a simple-mfd in order to properly enumerate child devices
> like our eMMC PHY.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>

applied all 3 for 4.8 with the received Reviews.

Please keep the arm64 lower-case and carry over already received 
Acks/Reviews (Shawn and Doug on patch2 in v2).


Thanks
Heiko