From: ykk@rock-chips.com (Yakir Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: rockchip: add VOP and VOP iommu node for rk3399
Date: Mon, 23 May 2016 21:11:10 +0800 [thread overview]
Message-ID: <1464009070-32215-1-git-send-email-ykk@rock-chips.com> (raw)
In-Reply-To: <1464009056-32158-1-git-send-email-ykk@rock-chips.com>
From: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 58 ++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 46f325a..54e5c25 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -543,6 +543,64 @@
status = "disabled";
};
+ vopl: vop at ff8f0000 {
+ compatible = "rockchip,rk3399-vop-lit";
+ reg = <0x0 0xff8f0000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopl_mmu>;
+ status = "disabled";
+
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopl_mmu: iommu at ff8f3f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff8f3f00 0x0 0x100>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopl_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopb: vop at ff900000 {
+ compatible = "rockchip,rk3399-vop-big";
+ reg = <0x0 0xff900000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ status = "disabled";
+
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopb_mmu: iommu at ff903f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff903f00 0x0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopb_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ status = "disabled";
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3399-pinctrl";
rockchip,grf = <&grf>;
--
1.9.1
next prev parent reply other threads:[~2016-05-23 13:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-23 13:10 [PATCH 0/3] Add the eDP/VOP device node for rk3399 Yakir Yang
2016-05-23 13:11 ` Yakir Yang [this message]
2016-05-23 13:18 ` [PATCH 1/3] arm64: dts: rockchip: add VOP and VOP iommu " Heiko Stuebner
2016-05-23 13:26 ` Yakir Yang
2016-05-23 13:11 ` [PATCH 2/3] arm64: dts: rockchip: add eDP device " Yakir Yang
2016-05-23 13:11 ` [PATCH 3/3] arm64: dts: rockchip: add backlight support for rk3399 evb board Yakir Yang
-- strict thread matches above, loose matches on Subject: below --
2016-05-23 13:33 [PATCH 0/3] Add the eDP/VOP device node for rk3399 Yakir Yang
2016-05-23 13:33 ` [PATCH 1/3] arm64: dts: rockchip: add VOP and VOP iommu " Yakir Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464009070-32215-1-git-send-email-ykk@rock-chips.com \
--to=ykk@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox