From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/6] clocksource/drivers/arm_arch_timer: Move enums and defines to header file
Date: Tue, 24 May 2016 21:30:28 +0800 [thread overview]
Message-ID: <1464096633-9309-2-git-send-email-fu.wei@linaro.org> (raw)
In-Reply-To: <1464096633-9309-1-git-send-email-fu.wei@linaro.org>
From: Fu Wei <fu.wei@linaro.org>
To support the arm_arch_timer via ACPI we need to share defines and enums
between the driver and the ACPI parser code.
Split out the relevant defines and enums into arm_arch_timer.h.
No functional change.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 11 -----------
include/clocksource/arm_arch_timer.h | 11 +++++++++++
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 4814446..5d7272e 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -48,8 +48,6 @@
#define CNTV_TVAL 0x38
#define CNTV_CTL 0x3c
-#define ARCH_CP15_TIMER BIT(0)
-#define ARCH_MEM_TIMER BIT(1)
static unsigned arch_timers_present __initdata;
static void __iomem *arch_counter_base;
@@ -62,15 +60,6 @@ struct arch_timer {
#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
static u32 arch_timer_rate;
-
-enum ppi_nr {
- PHYS_SECURE_PPI,
- PHYS_NONSECURE_PPI,
- VIRT_PPI,
- HYP_PPI,
- MAX_TIMER_PPI
-};
-
static int arch_timer_ppi[MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt;
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index caedb74..6f06481 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -19,6 +19,9 @@
#include <linux/timecounter.h>
#include <linux/types.h>
+#define ARCH_CP15_TIMER BIT(0)
+#define ARCH_MEM_TIMER BIT(1)
+
#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
#define ARCH_TIMER_CTRL_IT_MASK (1 << 1)
#define ARCH_TIMER_CTRL_IT_STAT (1 << 2)
@@ -34,6 +37,14 @@ enum arch_timer_reg {
ARCH_TIMER_REG_TVAL,
};
+enum ppi_nr {
+ PHYS_SECURE_PPI,
+ PHYS_NONSECURE_PPI,
+ VIRT_PPI,
+ HYP_PPI,
+ MAX_TIMER_PPI
+};
+
#define ARCH_TIMER_PHYS_ACCESS 0
#define ARCH_TIMER_VIRT_ACCESS 1
#define ARCH_TIMER_MEM_PHYS_ACCESS 2
--
2.5.5
next prev parent reply other threads:[~2016-05-24 13:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 13:30 [PATCH v5 0/6] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei at linaro.org
2016-05-24 13:30 ` fu.wei at linaro.org [this message]
2016-05-24 13:30 ` [PATCH v5 2/6] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei at linaro.org
2016-05-30 15:07 ` Daniel Lezcano
2016-05-24 13:30 ` [PATCH v5 3/6] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei at linaro.org
2016-05-24 13:30 ` [PATCH v5 4/6] acpi: Add GTDT table parse driver into ACPI driver fu.wei at linaro.org
2016-05-30 22:56 ` Daniel Lezcano
[not found] ` <CADyBb7vL1RHa3V8M1bNb-63rZiRZWJt4Kory61+1PA+Ruv59Gg@mail.gmail.com>
2016-06-02 12:51 ` Daniel Lezcano
2016-05-24 13:30 ` [PATCH v5 5/6] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei at linaro.org
2016-06-01 16:03 ` Timur Tabi
2016-05-24 13:30 ` [PATCH v5 6/6] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei at linaro.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464096633-9309-2-git-send-email-fu.wei@linaro.org \
--to=fu.wei@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).