[RESEND PATCH 4/6] Documentation: bindings: add dt documentation for cdn DP controller

[zyw@rock-chips.com (Chris Zhong)]

This patch adds a binding that describes the cdn DP controller for
rk3399.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

 .../bindings/display/rockchip/cdn-dp-rockchip.txt  | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt

diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
new file mode 100644
index 0000000..60795c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
@@ -0,0 +1,57 @@
+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+	       Required elements: "core_clk" "pclk" "spdif"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+	 Documentation/devicetree/bindings/media/video-interfaces.txt.
+	 contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+-------------------------------------------------------------------------------
+
+Example:
+	cdn_dp: dp at fec00000 {
+		compatible = "rockchip,cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>;
+		clock-names = "core_clk", "pclk", "spdif";
+		phys = <&tcphy0>;
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dp_in_vopb: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint at 1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};
-- 
2.6.3