From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 06/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
Date: Sat, 28 May 2016 11:54:17 +0200 [thread overview]
Message-ID: <1464429273-23457-7-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1464429273-23457-1-git-send-email-krzk@kernel.org>
Configure the pinctrl for MMC0 (eMMC) and MMC2 (microSD card).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Important changes since v2:
1. Re-order the eMMC pins by pin-name, not by label.
---
arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 77 +++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index f9aa6bb55464..ddacafa1e907 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -277,6 +277,83 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpc0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpc2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
};
&pinctrl_1 {
--
2.7.4
next prev parent reply other threads:[~2016-05-28 9:54 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-28 9:54 [PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 04/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski
2016-05-28 9:54 ` Krzysztof Kozlowski [this message]
2016-05-28 9:54 ` [PATCH v5 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 08/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 09/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 10/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski
2016-06-01 19:57 ` Kevin Hilman
2016-06-01 20:06 ` Krzysztof Kozlowski
2016-06-01 20:52 ` Javier Martinez Canillas
2016-06-01 20:54 ` Javier Martinez Canillas
2016-06-02 4:17 ` Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 15/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 16/22] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 17/22] ARM: dts: exynos: Add initial support for Odroid XU board Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 19/22] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks Krzysztof Kozlowski
2016-06-01 22:15 ` Stephen Boyd
2016-05-28 9:54 ` [PATCH v5 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 Krzysztof Kozlowski
2016-05-28 9:54 ` [PATCH v5 22/22] ARM: dts: exynos: Add RTC and I2C " Krzysztof Kozlowski
2016-05-30 15:27 ` [PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU Sylwester Nawrocki
2016-05-31 9:12 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464429273-23457-7-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).