From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Tue, 31 May 2016 11:49:58 +0200 Subject: [PATCH 2/2] dt-bindings: clocksource: Add Add Oxford Semiconductor RPS Timer bindings In-Reply-To: <1464688198-9655-1-git-send-email-narmstrong@baylibre.com> References: <1464688198-9655-1-git-send-email-narmstrong@baylibre.com> Message-ID: <1464688198-9655-3-git-send-email-narmstrong@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add DT bindings for the Oxford Semiconductor RPS dual Timer. Signed-off-by: Neil Armstrong --- .../devicetree/bindings/timer/oxsemi,rps-timer.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt diff --git a/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt new file mode 100644 index 0000000..3ca89cd --- /dev/null +++ b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt @@ -0,0 +1,17 @@ +Oxford Semiconductor OXNAS SoCs Family RPS Timer +================================================ + +Required properties: +- compatible: Should be "oxsemi,ox810se-rps-timer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupts of the two timers +- clocks : The phandle of the timer clock source + +example: + +timer0: timer at 200 { + compatible = "oxsemi,ox810se-rps-timer"; + reg = <0x200 0x40>; + clocks = <&rpsclk>; + interrupts = <4 5>; +}; -- 1.9.1