From: isubramanian@apm.com (Iyappan Subramanian)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/5] dtb: xgene: Add MDIO node
Date: Tue, 31 May 2016 17:10:39 -0700 [thread overview]
Message-ID: <1464739840-21971-5-git-send-email-isubramanian@apm.com> (raw)
In-Reply-To: <1464739840-21971-1-git-send-email-isubramanian@apm.com>
Added mdio node for mdio driver. Also added phy-handle
reference to the ethernet nodes.
Removed unused mdio subnode within storm menet ethernet node.
Removed unused clock node from storm sgenet1.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Tested-by: Toan Le <toanle@apm.com>
Tested-by: Matthias Brugger <mbrugger@suse.com>
---
arch/arm64/boot/dts/apm/apm-merlin.dts | 9 +++++++
arch/arm64/boot/dts/apm/apm-mustang.dts | 12 ++++++++++
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 11 +++++++++
arch/arm64/boot/dts/apm/apm-storm.dtsi | 38 +++++++++++-------------------
4 files changed, 46 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
index 387c6a8..c765f26 100644
--- a/arch/arm64/boot/dts/apm/apm-merlin.dts
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -83,3 +83,12 @@
status = "ok";
};
};
+
+&mdio {
+ sgenet0phy: phy at 3 {
+ reg = <0x0>;
+ };
+ sgenet1phy: phy at 2 {
+ reg = <0x2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index 44db32e..c4e2bc4 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -79,3 +79,15 @@
&mmc0 {
status = "ok";
};
+
+&mdio {
+ menetphy: phy at 3 {
+ reg = <0x3>;
+ };
+ sgenet0phy: phy at 4 {
+ reg = <0x4>;
+ };
+ sgenet1phy: phy at 5 {
+ reg = <0x5>;
+ };
+};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index c569f76..17333fa 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -625,6 +625,15 @@
apm,irq-start = <8>;
};
+ mdio: mdio at 0x1f610000 {
+ compatible = "apm,xgene-mdio-sgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1f610000 0x0 0x100>,
+ <0x0 0X1f61d000 0x0 0X100>;
+ clocks = <&xge0clk 0>;
+ };
+
sgenet0: ethernet at 1f610000 {
compatible = "apm,xgene2-sgenet";
status = "disabled";
@@ -637,6 +646,7 @@
clocks = <&xge0clk 0>;
local-mac-address = [00 01 73 00 00 01];
phy-connection-type = "sgmii";
+ phy-handle = <&sgenet0phy>;
};
xgenet1: ethernet at 1f620000 {
@@ -659,6 +669,7 @@
clocks = <&xge1clk 0>;
local-mac-address = [00 01 73 00 00 02];
phy-connection-type = "xgmii";
+ phy-handle = <&sgenet1phy>;
};
rng: rng at 10520000 {
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 5147d76..f631fe4 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -237,20 +237,11 @@
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f21c000 0x0 0x1000>;
reg-names = "csr-reg";
- csr-mask = <0x3>;
+ csr-mask = <0xa>;
+ enable-mask = <0xf>;
clock-output-names = "sge0clk";
};
- sge1clk: sge1clk at 1f21c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f21c000 0x0 0x1000>;
- reg-names = "csr-reg";
- csr-mask = <0xc>;
- clock-output-names = "sge1clk";
- };
-
xge0clk: xge0clk at 1f61c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
@@ -921,6 +912,14 @@
clocks = <&rtcclk 0>;
};
+ mdio: mdio at 0x17020000 {
+ compatible = "apm,xgene-mdio-rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x17020000 0x0 0xd100>;
+ clocks = <&menetclk 0>;
+ };
+
menet: ethernet at 17020000 {
compatible = "apm,xgene-enet";
status = "disabled";
@@ -930,21 +929,11 @@
reg-names = "enet_csr", "ring_csr", "ring_cmd";
interrupts = <0x0 0x3c 0x4>;
dma-coherent;
- clocks = <&menetclk 0>;
/* mac address will be overwritten by the bootloader */
local-mac-address = [00 00 00 00 00 00];
+ clocks = <&menetclk 0>;
phy-connection-type = "rgmii";
phy-handle = <&menetphy>;
- mdio {
- compatible = "apm,xgene-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- menetphy: menetphy at 3 {
- compatible = "ethernet-phy-id001c.c915";
- reg = <0x3>;
- };
-
- };
};
sgenet0: ethernet at 1f210000 {
@@ -957,9 +946,10 @@
interrupts = <0x0 0xA0 0x4>,
<0x0 0xA1 0x4>;
dma-coherent;
- clocks = <&sge0clk 0>;
local-mac-address = [00 00 00 00 00 00];
+ clocks = <&sge0clk 0>;
phy-connection-type = "sgmii";
+ phy-handle = <&sgenet0phy>;
};
sgenet1: ethernet at 1f210030 {
@@ -973,9 +963,9 @@
<0x0 0xAD 0x4>;
port-id = <1>;
dma-coherent;
- clocks = <&sge1clk 0>;
local-mac-address = [00 00 00 00 00 00];
phy-connection-type = "sgmii";
+ phy-handle = <&sgenet1phy>;
};
xgenet: ethernet at 1f610000 {
--
1.9.1
next prev parent reply other threads:[~2016-06-01 0:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-01 0:10 [PATCH v2 0/5] drivers: net: xgene: Fix 1G hot-plug and module support Iyappan Subramanian
2016-06-01 0:10 ` [PATCH v2 1/5] drivers: net: xgene: MAC and PHY configuration changes Iyappan Subramanian
2016-06-01 0:10 ` [PATCH v2 2/5] drivers: net: xgene: Backward compatibility with older firmware Iyappan Subramanian
2016-06-01 0:10 ` [PATCH v2 3/5] drivers: net: phy: Add MDIO driver Iyappan Subramanian
2016-06-01 1:11 ` Andrew Lunn
2016-07-05 4:40 ` Iyappan Subramanian
2016-07-05 13:49 ` Andrew Lunn
2016-07-06 23:44 ` Iyappan Subramanian
2016-07-07 14:03 ` Andrew Lunn
2016-07-07 14:14 ` Russell King - ARM Linux
2016-07-07 22:58 ` Iyappan Subramanian
2016-07-07 22:57 ` Iyappan Subramanian
2016-06-01 0:10 ` Iyappan Subramanian [this message]
2016-06-01 0:10 ` [PATCH v2 5/5] drivers: net: xgene: Fix module load/unload crash Iyappan Subramanian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464739840-21971-5-git-send-email-isubramanian@apm.com \
--to=isubramanian@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).