From mboxrd@z Thu Jan 1 00:00:00 1970 From: kraxel@redhat.com (Gerd Hoffmann) Date: Wed, 1 Jun 2016 23:43:31 +0200 Subject: [PATCH 22/32] ARM: bcm2835: Include SDHOST in the device tree. In-Reply-To: <1464817421-8519-1-git-send-email-kraxel@redhat.com> References: <1464817421-8519-1-git-send-email-kraxel@redhat.com> Message-ID: <1464817421-8519-23-git-send-email-kraxel@redhat.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Eric Anholt It's disabled by default, and will be enabled by a particular board's DT. The DMA channels are also currently left out, because our DMA engine support doesn't yet include slave SG, and there doesn't appear to be a clean way to include "does slave SG" in the channel request/config process. Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 3866fc7a..170d620 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -399,6 +399,14 @@ status = "disabled"; }; + sdhost: sdhost at 7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + status = "disabled"; + }; + pwm: pwm at 7e20c000 { compatible = "brcm,bcm2835-pwm"; reg = <0x7e20c000 0x28>; -- 1.8.3.1