From: p.zabel@pengutronix.de (Philipp Zabel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] Documentation/devicetree/bindings: Add b850v3_lvds_dp
Date: Thu, 02 Jun 2016 14:49:01 +0200 [thread overview]
Message-ID: <1464871741.3307.16.camel@pengutronix.de> (raw)
In-Reply-To: <1464626385-19253-4-git-send-email-peter.senna@collabora.com>
Hi Peter,
Am Montag, den 30.05.2016, 18:39 +0200 schrieb Peter Senna Tschudin:
> Devicetree bindings documentation for the GE B850v3 LVDS/DP++
> display bridge.
>
> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
> ---
> .../devicetree/bindings/ge/b850v3_lvds_dp.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt
>
> diff --git a/Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt b/Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt
> new file mode 100644
> index 0000000..32e123a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt
> @@ -0,0 +1,38 @@
> +Driver for GE B850v3 LVDS/DP++ display bridge
> +
> +Required properties:
> + - compatible : should be "ge,b850v3_lvds_dp".
In the cover mail you write that this is a combination of the STDP4028
DP transmitter and STDP2690 DP/DP++ converter. So shouldn't this binding
comprise two device tree nodes, one with compatible "st,stdp4028", one
with "st,stdp2690", then?
Is the stdp2690 connected to the stdp4028's i2c master?
regards
Philipp
next prev parent reply other threads:[~2016-06-02 12:49 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-30 16:39 [PATCH 0/5] Add driver for GE B850v3 LVDS/DP++ Bridge Peter Senna Tschudin
2016-05-30 16:39 ` [PATCH 1/5] drm/imx-ldb: Add support to drm-bridge Peter Senna Tschudin
2016-06-02 13:09 ` Philipp Zabel
2016-05-30 16:39 ` [PATCH 2/5] arm/dts/imx6q-b850v3: Configure IPU assignment order Peter Senna Tschudin
2016-05-30 16:49 ` Fabio Estevam
2016-06-02 12:55 ` Philipp Zabel
2016-05-30 16:39 ` [PATCH 3/5] Documentation/devicetree/bindings: Add b850v3_lvds_dp Peter Senna Tschudin
2016-06-02 12:49 ` Philipp Zabel [this message]
2016-06-02 23:19 ` Peter Senna Tschudin
2016-06-02 22:57 ` Rob Herring
2016-05-30 16:39 ` [PATCH 4/5] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge Peter Senna Tschudin
2016-05-31 7:48 ` Enric Balletbo Serra
2016-05-30 16:39 ` [PATCH 5/5] arm/dts/imx6q-b850v3: Use " Peter Senna Tschudin
2016-05-30 16:54 ` Fabio Estevam
2016-06-09 16:25 ` [PATCH V2 0/5] Add driver for " Peter Senna Tschudin
2016-06-09 16:25 ` [PATCH V2 1/5] drm/imx-ldb: Add support to drm-bridge Peter Senna Tschudin
2016-06-09 16:25 ` [PATCH V2 2/5] dts/imx6q-b850v3: Configure IPU assignment order Peter Senna Tschudin
2016-06-09 16:25 ` [PATCH V2 3/5] Documentation/devicetree/bindings: b850v3_lvds_dp Peter Senna Tschudin
2016-06-10 17:42 ` Rob Herring
2016-06-10 18:54 ` Javier Martinez Canillas
2016-06-09 16:25 ` [PATCH V2 4/5] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge Peter Senna Tschudin
2016-06-10 7:39 ` Enric Balletbo Serra
2016-06-10 9:44 ` Peter Senna Tschudin
2016-06-10 14:13 ` Daniel Vetter
2016-06-22 8:34 ` Archit Taneja
2016-06-09 16:25 ` [PATCH V2 5/5] dts/imx6q-b850v3: Use " Peter Senna Tschudin
2016-07-31 19:55 ` [PATCH V3 0/5] Add driver for " Peter Senna Tschudin
2016-07-31 19:55 ` [PATCH V3 1/5] drm/imx-ldb: Add support to drm-bridge Peter Senna Tschudin
2016-08-01 10:21 ` Philipp Zabel
2016-08-02 18:46 ` Peter Senna Tschudin
2016-07-31 19:55 ` [PATCH V3 2/5] dts/imx6q-b850v3: Configure IPU assignment order Peter Senna Tschudin
2016-08-01 8:54 ` Lucas Stach
2016-08-01 12:30 ` Peter Senna Tschudin
2016-08-02 13:13 ` Daniel Vetter
2016-07-31 19:55 ` [PATCH V3 3/5] Documentation/devicetree/bindings: b850v3_lvds_dp Peter Senna Tschudin
2016-08-01 16:59 ` Rob Herring
2016-07-31 19:55 ` [PATCH V3 4/5] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge Peter Senna Tschudin
2016-07-31 19:55 ` [PATCH V3 5/5] dts/imx6q-b850v3: Use " Peter Senna Tschudin
2016-08-04 22:36 ` [PATCH V4 0/4] Add driver for " Peter Senna Tschudin
2016-08-04 22:36 ` [PATCH V4 1/4] drm/imx-ldb: Add support to drm-bridge Peter Senna Tschudin
2016-08-16 15:40 ` Martyn Welch
2016-08-04 22:36 ` [PATCH V4 2/4] Documentation/devicetree/bindings: b850v3_lvds_dp Peter Senna Tschudin
2016-08-05 7:28 ` Enric Balletbo Serra
2016-08-16 15:59 ` Martyn Welch
2016-08-04 22:37 ` [PATCH V4 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge Peter Senna Tschudin
2016-08-05 7:38 ` Enric Balletbo Serra
2016-08-04 22:37 ` [PATCH V4 4/4] dts/imx6q-b850v3: Use " Peter Senna Tschudin
2016-08-09 16:41 ` [PATCH V5 0/4] Add driver for " Peter Senna Tschudin
2016-08-09 16:41 ` [PATCH V5 1/4] drm/imx-ldb: Add support to drm-bridge Peter Senna Tschudin
2016-08-11 9:38 ` Philipp Zabel
2016-08-09 16:41 ` [PATCH V5 2/4] Documentation/devicetree/bindings: b850v3_lvds_dp Peter Senna Tschudin
2016-09-26 8:26 ` Peter Senna Tschudin
2016-08-09 16:41 ` [PATCH V5 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge Peter Senna Tschudin
2016-08-16 4:15 ` Archit Taneja
2016-09-26 8:27 ` Peter Senna Tschudin
2016-09-26 8:31 ` Archit Taneja
2016-09-26 8:58 ` Peter Senna Tschudin
2016-09-26 10:28 ` Archit Taneja
2016-09-26 10:29 ` Archit Taneja
2016-09-26 11:54 ` Peter Senna Tschudin
2016-09-26 12:54 ` Archit Taneja
2016-08-09 16:41 ` [PATCH V5 4/4] dts/imx6q-b850v3: Use " Peter Senna Tschudin
2016-09-26 8:27 ` Peter Senna Tschudin
2016-09-29 10:39 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464871741.3307.16.camel@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).