* [PATCH 3/6] clocksource/drivers/bcm2835: Add the COMPILE_TEST option
[not found] <1464903697-3802-1-git-send-email-daniel.lezcano@linaro.org>
@ 2016-06-02 21:41 ` Daniel Lezcano
2016-06-02 21:41 ` [PATCH 5/6] clocksource/drivers/bcm_kona: " Daniel Lezcano
2016-06-02 21:41 ` [PATCH 6/6] clocksource/drivers/clps_711x: " Daniel Lezcano
2 siblings, 0 replies; 3+ messages in thread
From: Daniel Lezcano @ 2016-06-02 21:41 UTC (permalink / raw)
To: linux-arm-kernel
Change the Kconfig option logic to fullfil with the current approach.
A new Kconfig option is added, CONFIG_BCM2835_TIMER and is selected by the
platform. Then the clocksource's Kconfig is changed to make this option
selectable by the user if the COMPILE_TEST option is set. Otherwise, it
is up to the platform's Kconfig to select the timer.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/mach-bcm/Kconfig | 1 +
drivers/clocksource/Kconfig | 7 +++++++
drivers/clocksource/Makefile | 2 +-
3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 7ef1214..b7414df 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -143,6 +143,7 @@ config ARCH_BCM2835
select ARM_TIMER_SP804
select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
select CLKSRC_OF
+ select BCM2835_TIMER
select PINCTRL
select PINCTRL_BCM2835
help
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6ff327a..34053ab 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -27,6 +27,13 @@ config CLKBLD_I8253
config CLKSRC_MMIO
bool
+config BCM2835_TIMER
+ bool "BCM2835 timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
+ help
+ Enables the support for the BCM2835 timer driver.
+
config DIGICOLOR_TIMER
bool "Digicolor timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index b0a3c96..6e278d4 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ORION_TIMER) += time-orion.o
-obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
+obj-$(CONFIG_BCM2835_TIMER) += bcm2835_timer.o
obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o
obj-$(CONFIG_ARCH_ATLAS7) += timer-atlas7.o
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 5/6] clocksource/drivers/bcm_kona: Add the COMPILE_TEST option
[not found] <1464903697-3802-1-git-send-email-daniel.lezcano@linaro.org>
2016-06-02 21:41 ` [PATCH 3/6] clocksource/drivers/bcm2835: Add the COMPILE_TEST option Daniel Lezcano
@ 2016-06-02 21:41 ` Daniel Lezcano
2016-06-02 21:41 ` [PATCH 6/6] clocksource/drivers/clps_711x: " Daniel Lezcano
2 siblings, 0 replies; 3+ messages in thread
From: Daniel Lezcano @ 2016-06-02 21:41 UTC (permalink / raw)
To: linux-arm-kernel
Change the Kconfig option logic to fullfil with the current approach.
A new Kconfig option is added, CONFIG_BCM_KONA_TIMER and is selected by the
platform. Then the clocksource's Kconfig is changed to make this option
selectable by the user if the COMPILE_TEST option is set. Otherwise, it is
up to the platform's Kconfig to select the timer.
The timer uses <asm/mach/time.h>, which is now only for ARM, so this
driver will depend on ARM.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/mach-bcm/Kconfig | 1 +
drivers/clocksource/Kconfig | 7 +++++++
drivers/clocksource/Makefile | 2 +-
3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b7414df..e32ef5b 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -89,6 +89,7 @@ config ARCH_BCM_MOBILE
select HAVE_ARM_ARCH_TIMER
select PINCTRL
select ARCH_BCM_MOBILE_SMP if SMP
+ select BCM_KONA_TIMER
help
This enables support for systems based on Broadcom mobile SoCs.
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index a1e0cf9..6714a22 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -34,6 +34,13 @@ config BCM2835_TIMER
help
Enables the support for the BCM2835 timer driver.
+config BCM_KONA_TIMER
+ bool "BCM mobile timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
+ help
+ Enables the support for the BCM Kona mobile timer driver.
+
config DIGICOLOR_TIMER
bool "Digicolor timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 6e278d4..662a87c 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -33,7 +33,7 @@ obj-$(CONFIG_MESON6_TIMER) += meson6_timer.o
obj-$(CONFIG_TEGRA_TIMER) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
-obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o
+obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 6/6] clocksource/drivers/clps_711x: Add the COMPILE_TEST option
[not found] <1464903697-3802-1-git-send-email-daniel.lezcano@linaro.org>
2016-06-02 21:41 ` [PATCH 3/6] clocksource/drivers/bcm2835: Add the COMPILE_TEST option Daniel Lezcano
2016-06-02 21:41 ` [PATCH 5/6] clocksource/drivers/bcm_kona: " Daniel Lezcano
@ 2016-06-02 21:41 ` Daniel Lezcano
2 siblings, 0 replies; 3+ messages in thread
From: Daniel Lezcano @ 2016-06-02 21:41 UTC (permalink / raw)
To: linux-arm-kernel
Change the Kconfig option logic to fullfil with the current approach.
A new Kconfig option is added, CONFIG_BCM_KONA_TIMER and is selected by the
platform. Then the clocksource's Kconfig is changed to make this option
selectable by the user if the COMPILE_TEST option is set. Otherwise, it is
up to the platform's Kconfig to select the timer.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/Kconfig | 2 +-
drivers/clocksource/Kconfig | 7 +++++++
drivers/clocksource/Makefile | 2 +-
3 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cdfa6c2..0c1f546 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -356,10 +356,10 @@ config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
- select CLKSRC_MMIO
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
+ select CLPS711X_TIMER
select MFD_SYSCON
select SOC_BUS
help
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6714a22..e92a814 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -155,6 +155,13 @@ config CLKSRC_DBX500_PRCMU
help
Use the always on PRCMU Timer as clocksource
+config CLPS711X_TIMER
+ bool "Cirrus logic timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
+ help
+ Enables support for the Cirrus Logic PS711 timer.
+
config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
bool "Clocksource PRCMU Timer sched_clock"
depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 662a87c..ae6c09f 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ORION_TIMER) += time-orion.o
obj-$(CONFIG_BCM2835_TIMER) += bcm2835_timer.o
-obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o
+obj-$(CONFIG_CLPS711X_TIMER) += clps711x-timer.o
obj-$(CONFIG_ARCH_ATLAS7) += timer-atlas7.o
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-06-02 21:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1464903697-3802-1-git-send-email-daniel.lezcano@linaro.org>
2016-06-02 21:41 ` [PATCH 3/6] clocksource/drivers/bcm2835: Add the COMPILE_TEST option Daniel Lezcano
2016-06-02 21:41 ` [PATCH 5/6] clocksource/drivers/bcm_kona: " Daniel Lezcano
2016-06-02 21:41 ` [PATCH 6/6] clocksource/drivers/clps_711x: " Daniel Lezcano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).