From: kraxel@redhat.com (Gerd Hoffmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/9] raspberry pi 3 patch series, part 1: essentials
Date: Fri, 3 Jun 2016 08:18:19 +0200 [thread overview]
Message-ID: <1464934708-24769-1-git-send-email-kraxel@redhat.com> (raw)
Hi,
Raspberry pi 3 patches, next round. I'll go split the longish patch
series into smaller ones. I'll also go include the linux-arm-kernel
list this time (note I'm subscribed to linux-rpi-kernel only so please
take care to keep me in Cc). This is part one with just the essential
stuff needed to get the rpi3 boot, without wifi support.
Changes:
* dropped ARCH_BCM kconfig option.
* drop include hack for rpi3 device tree in arm.
* drop DMA offset patch, pick up the version from Alex instead.
Patches are also available from:
git://git.kraxel.org/linux bcm2837-47-v2
Note that the git branch has the complete set of patches (including
device tree patches and rpi3 wifi).
cheers,
Gerd
Alexander Graf (1):
arm64: Allow for different DMA and CPU bus offsets
Eric Anholt (5):
irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.
arm64: Add platform selection for BCM2835.
arm64: Add BCM2835 support to the defconfig.
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
Gerd Hoffmann (2):
pinctrl: walk into bcm subdir unconditionally
ARM: bcm2837: dt: Add the ethernet to the device trees
Lubomir Rintel (1):
ARM: bcm2835: dt: Add the ethernet to the device trees
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 +
arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x.dtsi | 2 +
arch/arm64/Kconfig.platforms | 13 ++++
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 30 +++++++++
arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 74 ++++++++++++++++++++++
arch/arm64/configs/defconfig | 23 ++++++-
arch/arm64/include/asm/dma-mapping.h | 17 ++++-
drivers/irqchip/irq-bcm2835.c | 3 +-
drivers/irqchip/irq-bcm2836.c | 2 +-
drivers/pinctrl/Makefile | 2 +-
18 files changed, 206 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837.dtsi
--
1.8.3.1
next reply other threads:[~2016-06-03 6:18 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-03 6:18 Gerd Hoffmann [this message]
2016-06-03 6:18 ` [PATCH v2 1/9] pinctrl: walk into bcm subdir unconditionally Gerd Hoffmann
2016-06-08 8:12 ` Linus Walleij
2016-06-10 0:16 ` Eric Anholt
2016-06-13 7:26 ` Linus Walleij
2016-06-14 17:37 ` Eric Anholt
2016-06-03 6:18 ` [PATCH v2 2/9] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ Gerd Hoffmann
2016-06-03 6:18 ` [PATCH v2 3/9] arm64: Allow for different DMA and CPU bus offsets Gerd Hoffmann
2016-06-03 6:18 ` [PATCH v2 4/9] arm64: Add platform selection for BCM2835 Gerd Hoffmann
2016-06-03 11:27 ` Catalin Marinas
2016-06-04 19:55 ` Eric Anholt
2016-06-08 9:12 ` Catalin Marinas
2016-06-10 0:21 ` Eric Anholt
2016-06-10 9:56 ` Catalin Marinas
2016-06-15 6:48 ` Eric Anholt
2016-06-15 8:07 ` Catalin Marinas
2016-06-15 21:57 ` Eric Anholt
2016-06-03 6:18 ` [PATCH v2 5/9] arm64: Add BCM2835 support to the defconfig Gerd Hoffmann
2016-06-03 7:36 ` Arnd Bergmann
2016-06-03 8:50 ` Gerd Hoffmann
2016-06-03 8:58 ` Arnd Bergmann
2016-06-03 9:53 ` Gerd Hoffmann
2016-06-07 22:16 ` Eric Anholt
2016-06-03 6:18 ` [PATCH v2 6/9] dt-bindings: Add root properties for Raspberry Pi 3 Gerd Hoffmann
2016-06-03 6:18 ` [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the " Gerd Hoffmann
2016-06-03 7:38 ` Arnd Bergmann
2016-06-03 8:45 ` Gerd Hoffmann
2016-06-03 8:55 ` Arnd Bergmann
2016-06-03 10:39 ` Gerd Hoffmann
2016-06-03 11:15 ` Arnd Bergmann
2016-06-03 16:17 ` Rob Herring
2016-06-04 21:39 ` Arnd Bergmann
2016-06-06 7:20 ` Gerd Hoffmann
2016-06-06 7:28 ` Arnd Bergmann
2016-06-06 7:47 ` Gerd Hoffmann
2016-06-03 9:04 ` Stefan Wahren
2016-06-03 6:18 ` [PATCH v2 8/9] ARM: bcm2835: dt: Add the ethernet to the device trees Gerd Hoffmann
2016-06-03 6:18 ` [PATCH v2 9/9] ARM: bcm2837: " Gerd Hoffmann
2016-06-03 7:40 ` [PATCH v2 0/9] raspberry pi 3 patch series, part 1: essentials Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464934708-24769-1-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).