From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Fri, 3 Jun 2016 10:23:06 +0200 Subject: [PATCH 08/14] pwm: sti: Avoid glitches on already running PWMs In-Reply-To: <1464942192-25967-1-git-send-email-boris.brezillon@free-electrons.com> References: <1464942192-25967-1-git-send-email-boris.brezillon@free-electrons.com> Message-ID: <1464942192-25967-9-git-send-email-boris.brezillon@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The current logic will disable the PWM clk even if a PWM was left enabled by the bootloader (because it's controlling a critical device like a regulator for example). Keep the PWM clk enabled if at least one PWM is enabled to avoid any glitches. Signed-off-by: Boris Brezillon --- drivers/pwm/pwm-sti.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c index 6300d3e..8232c5b 100644 --- a/drivers/pwm/pwm-sti.c +++ b/drivers/pwm/pwm-sti.c @@ -340,7 +340,7 @@ static int sti_pwm_probe(struct platform_device *pdev) struct sti_pwm_compat_data *cdata; struct sti_pwm_chip *pc; struct resource *res; - int ret; + int i, ret; pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); if (!pc) @@ -391,7 +391,7 @@ static int sti_pwm_probe(struct platform_device *pdev) return -EINVAL; } - ret = clk_prepare(pc->clk); + ret = clk_prepare_enable(pc->clk); if (ret) { dev_err(dev, "failed to prepare clock\n"); return ret; @@ -409,6 +409,19 @@ static int sti_pwm_probe(struct platform_device *pdev) return ret; } + /* + * Keep the PWM clk enabled if some PWMs appear to be up and + * running. + */ + for (i = 0; i < pc->chip.npwm; i++) { + struct pwm_state state; + + pwm_get_state(&pc->chip.pwms[i], &state); + if (state.enabled) + clk_enable(pc->clk); + } + clk_disable(pc->clk); + platform_set_drvdata(pdev, pc); return 0; -- 2.7.4