From mboxrd@z Thu Jan 1 00:00:00 1970 From: k.kozlowski@samsung.com (Krzysztof Kozlowski) Date: Mon, 06 Jun 2016 14:25:30 +0200 Subject: [GIT PULL 5/8] ARM: dts: exynos: DTS for v4.8 In-Reply-To: <1465215933-22709-1-git-send-email-k.kozlowski@samsung.com> References: <1465215933-22709-1-git-send-email-k.kozlowski@samsung.com> Message-ID: <1465215933-22709-6-git-send-email-k.kozlowski@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 1a695a905c18548062509178b98bc91e67510864: Linux 4.7-rc1 (2016-05-29 09:29:24 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-4.8 for you to fetch changes up to cb0df00040d593e3f56eaafdede568121f962c06: ARM: dts: exynos: No need to enable TMU nodes on Odroid XU3 family (2016-06-06 13:21:39 +0200) ---------------------------------------------------------------- Samsung DeviceTree update for v4.8: 1. Add missing async bridge for MFC power domain on Exynos5420. This fixes imprecise abort on s5p-mfc re-bind. 2. Define regulator supplies for MMC nodes on Exynos4412 Odroid boards and for TMU on Exynos542x Peach boards. 3. Thermal cleanups on Odroid XU3-family (Exynos5422). 4. Enable AX88760 USB hub on Origen board (Exynos4412). 5. Minor cleanups. ---------------------------------------------------------------- Javier Martinez Canillas (3): ARM: dts: exynos: Add async-bridge clock to MFC power domain for Exynos5420 ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards Krzysztof Kozlowski (5): ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3 ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3 ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3 ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes ARM: dts: exynos: No need to enable TMU nodes on Odroid XU3 family Matthew Leach (1): ARM: dts: exynos: Enable AX88760 USB hub on Origen board Naveen Krishna Chatradhi (1): ARM: dts: exynos: Use new compatible string for thermistors in Trats2 arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 28 ++++-- arch/arm/boot/dts/exynos4412-odroidu3.dts | 18 ++++ arch/arm/boot/dts/exynos4412-odroidx.dts | 11 +++ arch/arm/boot/dts/exynos4412-odroidx2.dts | 11 +++ arch/arm/boot/dts/exynos4412-origen.dts | 16 ++++ arch/arm/boot/dts/exynos4412-trats2.dts | 4 +- arch/arm/boot/dts/exynos5420-peach-pit.dts | 26 ++++-- arch/arm/boot/dts/exynos5420.dtsi | 5 +- arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi | 103 --------------------- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 98 ++++++++++++++++++-- arch/arm/boot/dts/exynos5800-peach-pi.dts | 26 ++++-- 11 files changed, 211 insertions(+), 135 deletions(-) delete mode 100644 arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi