From mboxrd@z Thu Jan 1 00:00:00 1970 From: ben.dooks@codethink.co.uk (Ben Dooks) Date: Thu, 9 Jun 2016 11:04:16 +0100 Subject: [PATCH] ARM: orion: remove unreferenced board-d2net.c Message-ID: <1465466656-30002-1-git-send-email-ben.dooks@codethink.co.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Either this has been mis-converted (and needs to be fixed) or is no longer referenced and can be safely removed. Signed-off-by: Ben Dooks --- Cc: Jason Cooper Cc: Andrew Lunn Cc: Sebastian Hesselbarth Cc: Gregory Clement Cc: linux-arm-kernel at lists.infradead.org --- arch/arm/mach-orion5x/Kconfig | 7 --- arch/arm/mach-orion5x/Makefile | 1 - arch/arm/mach-orion5x/board-d2net.c | 109 ------------------------------------ 3 files changed, 117 deletions(-) delete mode 100644 arch/arm/mach-orion5x/board-d2net.c diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a2af158..32897e8 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -130,13 +130,6 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_D2NET_DT - bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" - select ARCH_ORION5X_DT - help - Say 'Y' here if you want your kernel to support the - LaCie d2 Network NAS. - config MACH_NET2BIG bool "LaCie 2Big Network" select I2C_BOARDINFO if I2C diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 4b2502b..cf0ca8b 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -21,6 +21,5 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o -obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c deleted file mode 100644 index a89376a..0000000 --- a/arch/arm/mach-orion5x/board-d2net.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * arch/arm/mach-orion5x/board-d2net.c - * - * LaCie d2Network and Big Disk Network NAS setup - * - * Copyright (C) 2009 Simon Guinot - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "orion5x.h" - -/***************************************************************************** - * LaCie d2 Network Info - ****************************************************************************/ - -/***************************************************************************** - * GPIO LED's - ****************************************************************************/ - -/* - * The blue front LED is wired to the CPLD and can blink in relation with the - * SATA activity. - * - * The following array detail the different LED registers and the combination - * of their possible values: - * - * led_off | blink_ctrl | SATA active | LED state - * | | | - * 1 | x | x | off - * 0 | 0 | 0 | off - * 0 | 1 | 0 | blink (rate 300ms) - * 0 | x | 1 | on - * - * Notes: The blue and the red front LED's can't be on at the same time. - * Red LED have priority. - */ - -#define D2NET_GPIO_RED_LED 6 -#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 -#define D2NET_GPIO_BLUE_LED_OFF 23 - -static struct gpio_led d2net_leds[] = { - { - .name = "d2net:blue:sata", - .default_trigger = "default-on", - .gpio = D2NET_GPIO_BLUE_LED_OFF, - .active_low = 1, - }, - { - .name = "d2net:red:fail", - .gpio = D2NET_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data d2net_led_data = { - .num_leds = ARRAY_SIZE(d2net_leds), - .leds = d2net_leds, -}; - -static struct platform_device d2net_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &d2net_led_data, - }, -}; - -static void __init d2net_gpio_leds_init(void) -{ - int err; - - /* Configure register blink_ctrl to allow SATA activity LED blinking. */ - err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); - if (err) - gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); - } - if (err) - pr_err("d2net: failed to configure blue LED blink GPIO\n"); - - platform_device_register(&d2net_gpio_leds); -} - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -void __init d2net_init(void) -{ - d2net_gpio_leds_init(); - - pr_notice("d2net: Flash write are not yet supported.\n"); -} -- 2.8.1