From: chunfeng.yun@mediatek.com (chunfeng yun)
To: linux-arm-kernel@lists.infradead.org
Subject: Add MediaTek USB3 DRD Driver
Date: Fri, 10 Jun 2016 17:15:09 +0800 [thread overview]
Message-ID: <1465550109.11651.147.camel@mhfsdcap03> (raw)
In-Reply-To: <1465543962-11678-1-git-send-email-chunfeng.yun@mediatek.com>
Hi,
On Fri, 2016-06-10 at 15:32 +0800, Chunfeng Yun wrote:
> From 8fdc924cecf0ca14da6e8aba360501e53437e548 Mon Sep 17 00:00:00 2001
> From: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Date: Fri, 10 Jun 2016 15:20:20 +0800
> Subject: [PATCH 0/5] Add MediaTek USB3 DRD Driver
>
> These patches introduce the MediaTek USB3 dual-role controller
> driver.
>
> The driver can be configured as Dual-Role Device (DRD),
> Peripheral Only and Host Only (xHCI) modes. It works well
> with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is
> tested on MT8173 platform which only contains USB2.0 device IP,
> and on MT6290 platform which contains USB3.0 device IP.
>
> Change in v3:
> 1. fix some typo error
> 2. rename mtu3.txt to mt8173-mtu3.txt
>
> Change in v2:
> 1. modify binding docs according to suggestions
> 2. modify some comments and remove some dummy blank lines
> 3. fix memory leakage
>
> Chunfeng Yun (5):
> dt-bindings: mt8173-xhci: support host side of dual-role mode
> dt-bindings: mt8173-mtu3: add devicetree bindings
Could you please help me to review the following two patches based on
v4.7-rc1:
1- usb: xhci-mtk: make IPPC register optional
2- usb: Add MediaTek USB3 DRD Driver
Thank you very much
> usb: xhci-mtk: make IPPC register optional
> usb: Add MediaTek USB3 DRD Driver
> arm64: dts: mediatek: add USB3 DRD driver
>
> .../devicetree/bindings/usb/mt8173-mtu3.txt | 85 ++
> .../devicetree/bindings/usb/mt8173-xhci.txt | 48 ++
> arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 46 +-
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 28 +-
> drivers/usb/Kconfig | 2 +
> drivers/usb/Makefile | 1 +
> drivers/usb/host/xhci-mtk.c | 32 +-
> drivers/usb/mtu3/Kconfig | 47 ++
> drivers/usb/mtu3/Makefile | 20 +
> drivers/usb/mtu3/mtu3.h | 422 ++++++++++
> drivers/usb/mtu3/mtu3_core.c | 879 ++++++++++++++++++++
> drivers/usb/mtu3/mtu3_dr.c | 348 ++++++++
> drivers/usb/mtu3/mtu3_dr.h | 108 +++
> drivers/usb/mtu3/mtu3_gadget.c | 731 ++++++++++++++++
> drivers/usb/mtu3/mtu3_gadget_ep0.c | 879 ++++++++++++++++++++
> drivers/usb/mtu3/mtu3_host.c | 294 +++++++
> drivers/usb/mtu3/mtu3_hw_regs.h | 474 +++++++++++
> drivers/usb/mtu3/mtu3_plat.c | 490 +++++++++++
> drivers/usb/mtu3/mtu3_qmu.c | 599 +++++++++++++
> drivers/usb/mtu3/mtu3_qmu.h | 43 +
> 20 files changed, 5562 insertions(+), 14 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> create mode 100644 drivers/usb/mtu3/Kconfig
> create mode 100644 drivers/usb/mtu3/Makefile
> create mode 100644 drivers/usb/mtu3/mtu3.h
> create mode 100644 drivers/usb/mtu3/mtu3_core.c
> create mode 100644 drivers/usb/mtu3/mtu3_dr.c
> create mode 100644 drivers/usb/mtu3/mtu3_dr.h
> create mode 100644 drivers/usb/mtu3/mtu3_gadget.c
> create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c
> create mode 100644 drivers/usb/mtu3/mtu3_host.c
> create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h
> create mode 100644 drivers/usb/mtu3/mtu3_plat.c
> create mode 100644 drivers/usb/mtu3/mtu3_qmu.c
> create mode 100644 drivers/usb/mtu3/mtu3_qmu.h
>
> --
> 1.7.9.5
>
>
next prev parent reply other threads:[~2016-06-10 9:15 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 7:32 Add MediaTek USB3 DRD Driver Chunfeng Yun
2016-06-10 7:32 ` [PATCH v3, 1/5] dt-bindings: mt8173-xhci: support host side of dual-role mode Chunfeng Yun
2016-06-13 18:54 ` [PATCH v3,1/5] " Rob Herring
2016-06-14 2:20 ` chunfeng yun
2016-06-10 7:32 ` [PATCH v3,2/5] dt-bindings: mt8173-mtu3: add devicetree bindings Chunfeng Yun
2016-06-10 9:21 ` Felipe Balbi
2016-06-14 2:19 ` chunfeng yun
2016-06-10 7:32 ` [PATCH v3,3/5] usb: xhci-mtk: make IPPC register optional Chunfeng Yun
2016-06-10 7:32 ` [PATCH v3,5/5] arm64: dts: mediatek: add USB3 DRD driver Chunfeng Yun
2016-06-10 9:15 ` chunfeng yun [this message]
2016-06-10 9:27 ` Add MediaTek USB3 DRD Driver Felipe Balbi
[not found] ` <1465543962-11678-5-git-send-email-chunfeng.yun@mediatek.com>
2016-06-11 21:08 ` [PATCH v3,4/5] usb: " kbuild test robot
2016-06-12 4:14 ` kbuild test robot
2016-08-08 13:10 ` Greg Kroah-Hartman
2016-08-09 8:08 ` chunfeng yun
-- strict thread matches above, loose matches on Subject: below --
2016-06-15 3:07 Chunfeng Yun
2016-07-13 5:40 ` chunfeng yun
2016-05-31 5:52 Chunfeng Yun
2016-05-10 8:23 Chunfeng Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465550109.11651.147.camel@mhfsdcap03 \
--to=chunfeng.yun@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).