From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Sat, 11 Jun 2016 00:03:33 +0200 Subject: [PATCH 30/48] ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices In-Reply-To: <1465596231-21766-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1465596231-21766-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <1465596231-21766-31-git-send-email-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time. It also allows to use regmap instead of tclib. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d3.dtsi | 4 +++- arch/arm/boot/dts/sama5d3_tcb1.dtsi | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 36301bd9a14a..cfa659a18639 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -142,7 +142,9 @@ }; tcb0: timer at f0010000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&clk32k>; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 801f9745e82f..cb30bdb1a9ca 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -28,7 +28,9 @@ }; tcb1: timer at f8014000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf8014000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb1_clk>, <&clk32k>; -- 2.8.1