linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 05/63] clocksource/drivers/exynos_mct: Convert init function to return error
Date: Thu, 16 Jun 2016 23:26:24 +0200	[thread overview]
Message-ID: <1466112442-31105-6-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org>

The init functions do not return any error. They behave as the following:

 - panic, thus leading to a kernel crash while another timer may work and
   make the system boot up correctly

 or

 - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clocksource/exynos_mct.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index be09bc0..f6caed0 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -232,7 +232,7 @@ static cycles_t exynos4_read_current_timer(void)
 	return exynos4_read_count_32();
 }
 
-static void __init exynos4_clocksource_init(void)
+static int __init exynos4_clocksource_init(void)
 {
 	exynos4_mct_frc_start();
 
@@ -244,6 +244,8 @@ static void __init exynos4_clocksource_init(void)
 		panic("%s: can't register clocksource\n", mct_frc.name);
 
 	sched_clock_register(exynos4_read_sched_clock, 32, clk_rate);
+
+	return 0;
 }
 
 static void exynos4_mct_comp0_stop(void)
@@ -335,12 +337,14 @@ static struct irqaction mct_comp_event_irq = {
 	.dev_id		= &mct_comp_device,
 };
 
-static void exynos4_clockevent_init(void)
+static int exynos4_clockevent_init(void)
 {
 	mct_comp_device.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&mct_comp_device, clk_rate,
 					0xf, 0xffffffff);
 	setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
+
+	return 0;
 }
 
 static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
@@ -516,7 +520,7 @@ static struct notifier_block exynos4_mct_cpu_nb = {
 	.notifier_call = exynos4_mct_cpu_notify,
 };
 
-static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
+static int __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
 {
 	int err, cpu;
 	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
@@ -572,15 +576,17 @@ static void __init exynos4_timer_resources(struct device_node *np, void __iomem
 
 	/* Immediately configure the timer on the boot CPU */
 	exynos4_local_timer_setup(mevt);
-	return;
+	return 0;
 
 out_irq:
 	free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	return err;
 }
 
-static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
+static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
 {
 	u32 nr_irqs, i;
+	int ret;
 
 	mct_int_type = int_type;
 
@@ -600,20 +606,26 @@ static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
 	for (i = MCT_L0_IRQ; i < nr_irqs; i++)
 		mct_irqs[i] = irq_of_parse_and_map(np, i);
 
-	exynos4_timer_resources(np, of_iomap(np, 0));
-	exynos4_clocksource_init();
-	exynos4_clockevent_init();
+	ret = exynos4_timer_resources(np, of_iomap(np, 0));
+	if (ret)
+		return ret;
+
+	ret = exynos4_clocksource_init();
+	if (ret)
+		return ret;
+
+	return exynos4_clockevent_init();
 }
 
 
-static void __init mct_init_spi(struct device_node *np)
+static int __init mct_init_spi(struct device_node *np)
 {
 	return mct_init_dt(np, MCT_INT_SPI);
 }
 
-static void __init mct_init_ppi(struct device_node *np)
+static int __init mct_init_ppi(struct device_node *np)
 {
 	return mct_init_dt(np, MCT_INT_PPI);
 }
-CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
-CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
+CLOCKSOURCE_OF_DECLARE_RET(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
+CLOCKSOURCE_OF_DECLARE_RET(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
-- 
1.9.1

  parent reply	other threads:[~2016-06-16 21:26 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org>
2016-06-16 21:26 ` [PATCH V2 03/63] clocksource/drivers/rockchip_timer: Convert init function to return error Daniel Lezcano
2016-06-18 10:38   ` Heiko Stübner
2016-06-18 12:54     ` [PATCH V3] " Daniel Lezcano
2016-06-18 13:47       ` Heiko Stübner
2016-06-16 21:26 ` [PATCH V2 04/63] clocksource/drivers/mkt_timer: " Daniel Lezcano
2016-06-17 16:16   ` Matthias Brugger
2016-06-16 21:26 ` Daniel Lezcano [this message]
2016-06-16 21:26 ` [PATCH V2 07/63] clocksource/drivers/cadence_ttc: " Daniel Lezcano
2016-06-16 21:43   ` Sören Brinkmann
2016-06-16 21:26 ` [PATCH V2 08/63] clocksource/drivers/st_lpc: " Daniel Lezcano
2016-06-20  7:39   ` Patrice Chotard
2016-06-20 11:33   ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 10/63] clocksource/drivers/clps711x: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 11/63] clocksource/drivers/digitcolor: " Daniel Lezcano
2016-06-17  3:15   ` Baruch Siach
2016-06-16 21:26 ` [PATCH V2 12/63] clocksource/drivers/armv7m_systick: " Daniel Lezcano
2016-06-20 11:31   ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 13/63] clocksource/drivers/bcm2835_timer: " Daniel Lezcano
2016-06-26  3:10   ` Eric Anholt
2016-06-16 21:26 ` [PATCH V2 15/63] clocksource/drivers/clksrc-dbx500: " Daniel Lezcano
2016-06-17 16:10   ` Linus Walleij
2016-06-16 21:26 ` [PATCH V2 18/63] clocksource/drivers/arm_global_timer: " Daniel Lezcano
2016-06-20 11:32   ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 22/63] clocksource/drivers/mips-gic-timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 25/63] clocksource/drivers/mxs_timer: " Daniel Lezcano
2016-06-17  6:33   ` Uwe Kleine-König
2016-06-20  9:15   ` Liviu Dudau
2016-06-20  9:24     ` Daniel Lezcano
2016-06-20  9:26     ` [PATCH V3] clocksource/drivers/mps2-timer: " Daniel Lezcano
2016-06-20  9:42       ` liviu.dudau at arm.com
2016-06-16 21:26 ` [PATCH V2 31/63] clocksource/drivers/tango_xtal: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 35/63] clocksource/drivers/time-lpc32xx: " Daniel Lezcano
2016-06-17  6:52   ` Uwe Kleine-König
2016-06-17  8:44     ` [PATCH V3] clocksource/drivers/time-efm32: " Daniel Lezcano
2016-06-17  9:46       ` Uwe Kleine-König
2016-06-16 21:26 ` [PATCH V2 36/63] clocksource/drivers/time-orion: " Daniel Lezcano
2016-06-20 17:08   ` Sylvain Lemieux
2016-06-16 21:26 ` [PATCH V2 39/63] clocksource/drivers/timer-atlas7: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 42/63] clocksource/drivers/prima2: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 45/63] clocksource/drivers/timer-keystone: " Daniel Lezcano
2016-06-17 16:03   ` Santosh Shilimkar
2016-06-16 21:27 ` [PATCH V2 47/63] clocksource/drivers/timer-stm32: " Daniel Lezcano
2016-06-20 11:32   ` Maxime Coquelin
2016-06-16 21:27 ` [PATCH V2 48/63] clocksource/drivers/timer-sun5i: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 50/63] clocksource/drivers/timer-u300: " Daniel Lezcano
2016-06-17 16:11   ` Linus Walleij
2016-06-16 21:27 ` [PATCH V2 51/63] clocksource/drivers/versatile: " Daniel Lezcano
2016-06-20  9:13   ` Liviu Dudau
2016-06-16 21:27 ` [PATCH V2 53/63] clocksource/drivers/vt8500_timer: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 59/63] clocksource/drivers/smp_twd: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 62/63] clocksource/drivers/oxnas-rps: " Daniel Lezcano
2016-06-17  6:58   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466112442-31105-6-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).