linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 07/63] clocksource/drivers/cadence_ttc: Convert init function to return error
Date: Thu, 16 Jun 2016 23:26:26 +0200	[thread overview]
Message-ID: <1466112442-31105-8-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org>

The init functions do not return any error. They behave as the following:

 - panic, thus leading to a kernel crash while another timer may work and
   make the system boot up correctly

 or

 - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/cadence_ttc_timer.c | 76 ++++++++++++++++++++-------------
 1 file changed, 47 insertions(+), 29 deletions(-)

diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 9be6018..e2e7631 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -322,22 +322,22 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
+static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
 					 u32 timer_width)
 {
 	struct ttc_timer_clocksource *ttccs;
 	int err;
 
 	ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
-	if (WARN_ON(!ttccs))
-		return;
+	if (!ttccs)
+		return -ENOMEM;
 
 	ttccs->ttc.clk = clk;
 
 	err = clk_prepare_enable(ttccs->ttc.clk);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttccs);
-		return;
+		return err;
 	}
 
 	ttccs->ttc.freq = clk_get_rate(ttccs->ttc.clk);
@@ -345,8 +345,10 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
 	ttccs->ttc.clk_rate_change_nb.notifier_call =
 		ttc_rate_change_clocksource_cb;
 	ttccs->ttc.clk_rate_change_nb.next = NULL;
-	if (clk_notifier_register(ttccs->ttc.clk,
-				&ttccs->ttc.clk_rate_change_nb))
+
+	err = clk_notifier_register(ttccs->ttc.clk,
+				    &ttccs->ttc.clk_rate_change_nb);
+	if (err)
 		pr_warn("Unable to register clock notifier.\n");
 
 	ttccs->ttc.base_addr = base;
@@ -368,14 +370,16 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
 		     ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
 
 	err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttccs);
-		return;
+		return err;
 	}
 
 	ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
 	sched_clock_register(ttc_sched_clock_read, timer_width,
 			     ttccs->ttc.freq / PRESCALE);
+
+	return 0;
 }
 
 static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
@@ -401,30 +405,35 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
 	}
 }
 
-static void __init ttc_setup_clockevent(struct clk *clk,
-						void __iomem *base, u32 irq)
+static int __init ttc_setup_clockevent(struct clk *clk,
+				       void __iomem *base, u32 irq)
 {
 	struct ttc_timer_clockevent *ttcce;
 	int err;
 
 	ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
-	if (WARN_ON(!ttcce))
-		return;
+	if (!ttcce)
+		return -ENOMEM;
 
 	ttcce->ttc.clk = clk;
 
 	err = clk_prepare_enable(ttcce->ttc.clk);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttcce);
-		return;
+		return err;
 	}
 
 	ttcce->ttc.clk_rate_change_nb.notifier_call =
 		ttc_rate_change_clockevent_cb;
 	ttcce->ttc.clk_rate_change_nb.next = NULL;
-	if (clk_notifier_register(ttcce->ttc.clk,
-				&ttcce->ttc.clk_rate_change_nb))
+
+	err = clk_notifier_register(ttcce->ttc.clk,
+				    &ttcce->ttc.clk_rate_change_nb);
+	if (err) {
 		pr_warn("Unable to register clock notifier.\n");
+		return err;
+	}
+
 	ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk);
 
 	ttcce->ttc.base_addr = base;
@@ -451,13 +460,15 @@ static void __init ttc_setup_clockevent(struct clk *clk,
 
 	err = request_irq(irq, ttc_clock_event_interrupt,
 			  IRQF_TIMER, ttcce->ce.name, ttcce);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttcce);
-		return;
+		return err;
 	}
 
 	clockevents_config_and_register(&ttcce->ce,
 			ttcce->ttc.freq / PRESCALE, 1, 0xfffe);
+
+	return 0;
 }
 
 /**
@@ -466,17 +477,17 @@ static void __init ttc_setup_clockevent(struct clk *clk,
  * Initializes the timer hardware and register the clock source and clock event
  * timers with Linux kernal timer framework
  */
-static void __init ttc_timer_init(struct device_node *timer)
+static int __init ttc_timer_init(struct device_node *timer)
 {
 	unsigned int irq;
 	void __iomem *timer_baseaddr;
 	struct clk *clk_cs, *clk_ce;
 	static int initialized;
-	int clksel;
+	int clksel, ret;
 	u32 timer_width = 16;
 
 	if (initialized)
-		return;
+		return 0;
 
 	initialized = 1;
 
@@ -488,13 +499,13 @@ static void __init ttc_timer_init(struct device_node *timer)
 	timer_baseaddr = of_iomap(timer, 0);
 	if (!timer_baseaddr) {
 		pr_err("ERROR: invalid timer base address\n");
-		BUG();
+		return -ENXIO;
 	}
 
 	irq = irq_of_parse_and_map(timer, 1);
 	if (irq <= 0) {
 		pr_err("ERROR: invalid interrupt number\n");
-		BUG();
+		return -EINVAL;
 	}
 
 	of_property_read_u32(timer, "timer-width", &timer_width);
@@ -504,7 +515,7 @@ static void __init ttc_timer_init(struct device_node *timer)
 	clk_cs = of_clk_get(timer, clksel);
 	if (IS_ERR(clk_cs)) {
 		pr_err("ERROR: timer input clock not found\n");
-		BUG();
+		return PTR_ERR(clk_cs);
 	}
 
 	clksel = readl_relaxed(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
@@ -512,13 +523,20 @@ static void __init ttc_timer_init(struct device_node *timer)
 	clk_ce = of_clk_get(timer, clksel);
 	if (IS_ERR(clk_ce)) {
 		pr_err("ERROR: timer input clock not found\n");
-		BUG();
+		return PTR_ERR(clk_cs);
 	}
 
-	ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
-	ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
+	ret = ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
+	if (ret)
+		return ret;
+
+	ret = ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
+	if (ret)
+		return ret;
 
 	pr_info("%s #0@%p, irq=%d\n", timer->name, timer_baseaddr, irq);
+
+	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(ttc, "cdns,ttc", ttc_timer_init);
-- 
1.9.1

  parent reply	other threads:[~2016-06-16 21:26 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org>
2016-06-16 21:26 ` [PATCH V2 03/63] clocksource/drivers/rockchip_timer: Convert init function to return error Daniel Lezcano
2016-06-18 10:38   ` Heiko Stübner
2016-06-18 12:54     ` [PATCH V3] " Daniel Lezcano
2016-06-18 13:47       ` Heiko Stübner
2016-06-16 21:26 ` [PATCH V2 04/63] clocksource/drivers/mkt_timer: " Daniel Lezcano
2016-06-17 16:16   ` Matthias Brugger
2016-06-16 21:26 ` [PATCH V2 05/63] clocksource/drivers/exynos_mct: " Daniel Lezcano
2016-06-16 21:26 ` Daniel Lezcano [this message]
2016-06-16 21:43   ` [PATCH V2 07/63] clocksource/drivers/cadence_ttc: " Sören Brinkmann
2016-06-16 21:26 ` [PATCH V2 08/63] clocksource/drivers/st_lpc: " Daniel Lezcano
2016-06-20  7:39   ` Patrice Chotard
2016-06-20 11:33   ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 10/63] clocksource/drivers/clps711x: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 11/63] clocksource/drivers/digitcolor: " Daniel Lezcano
2016-06-17  3:15   ` Baruch Siach
2016-06-16 21:26 ` [PATCH V2 12/63] clocksource/drivers/armv7m_systick: " Daniel Lezcano
2016-06-20 11:31   ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 13/63] clocksource/drivers/bcm2835_timer: " Daniel Lezcano
2016-06-26  3:10   ` Eric Anholt
2016-06-16 21:26 ` [PATCH V2 15/63] clocksource/drivers/clksrc-dbx500: " Daniel Lezcano
2016-06-17 16:10   ` Linus Walleij
2016-06-16 21:26 ` [PATCH V2 18/63] clocksource/drivers/arm_global_timer: " Daniel Lezcano
2016-06-20 11:32   ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 22/63] clocksource/drivers/mips-gic-timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 25/63] clocksource/drivers/mxs_timer: " Daniel Lezcano
2016-06-17  6:33   ` Uwe Kleine-König
2016-06-20  9:15   ` Liviu Dudau
2016-06-20  9:24     ` Daniel Lezcano
2016-06-20  9:26     ` [PATCH V3] clocksource/drivers/mps2-timer: " Daniel Lezcano
2016-06-20  9:42       ` liviu.dudau at arm.com
2016-06-16 21:26 ` [PATCH V2 31/63] clocksource/drivers/tango_xtal: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 35/63] clocksource/drivers/time-lpc32xx: " Daniel Lezcano
2016-06-17  6:52   ` Uwe Kleine-König
2016-06-17  8:44     ` [PATCH V3] clocksource/drivers/time-efm32: " Daniel Lezcano
2016-06-17  9:46       ` Uwe Kleine-König
2016-06-16 21:26 ` [PATCH V2 36/63] clocksource/drivers/time-orion: " Daniel Lezcano
2016-06-20 17:08   ` Sylvain Lemieux
2016-06-16 21:26 ` [PATCH V2 39/63] clocksource/drivers/timer-atlas7: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 42/63] clocksource/drivers/prima2: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 45/63] clocksource/drivers/timer-keystone: " Daniel Lezcano
2016-06-17 16:03   ` Santosh Shilimkar
2016-06-16 21:27 ` [PATCH V2 47/63] clocksource/drivers/timer-stm32: " Daniel Lezcano
2016-06-20 11:32   ` Maxime Coquelin
2016-06-16 21:27 ` [PATCH V2 48/63] clocksource/drivers/timer-sun5i: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 50/63] clocksource/drivers/timer-u300: " Daniel Lezcano
2016-06-17 16:11   ` Linus Walleij
2016-06-16 21:27 ` [PATCH V2 51/63] clocksource/drivers/versatile: " Daniel Lezcano
2016-06-20  9:13   ` Liviu Dudau
2016-06-16 21:27 ` [PATCH V2 53/63] clocksource/drivers/vt8500_timer: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 59/63] clocksource/drivers/smp_twd: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 62/63] clocksource/drivers/oxnas-rps: " Daniel Lezcano
2016-06-17  6:58   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466112442-31105-8-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).