[PATCH net-next 01/19] net: hns: bug fix of ge reset sequence

[andriy.shevchenko@linux.intel.com (Andy Shevchenko)]

On Tue, 2016-06-21 at 11:56 +0800, Yisen Zhuang wrote:
> From: Qianqian Xie <xieqianqian@huawei.com>
> 
> The bit fileds of PPE reset register are different between HNS v1 and
> HNS v2, but the current procedure just only match HNS v1. Here is a
> patch to fix it.
> 
> Signed-off-by: Kejian Yan <yankejian@huawei.com>
> Signed-off-by: Qianqian Xie <xieqianqian@huawei.com>
> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
> ---
> ?drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 6 +++++-
> ?1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
> b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
> index 96cb628..09e60d6 100644
> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
> @@ -271,7 +271,11 @@ static void hns_dsaf_ge_srst_by_port(struct
> dsaf_device *dsaf_dev, u32 port,
> ?		}
> ?	} else {
> ?		reg_val_1 = 0x15540 << dsaf_dev->reset_offset;
> -		reg_val_2 = 0x100 << dsaf_dev->reset_offset;
> +
> +		if (AE_IS_VER1(dsaf_dev->dsaf_ver))
> +			reg_val_2 = 0x100 << dsaf_dev->reset_offset;
> +		else
> +			reg_val_2 = 0x40 << dsaf_dev->reset_offset;

reg_val_1 = 0x15540;
reg_val_2 =?AE_IS_VER1(dsaf_dev->dsaf_ver) ? 0x100 : 0x40;

reg_val_1 <<=?dsaf_dev->reset_offset;
reg_val_2 <<=?dsaf_dev-
>reset_offset;


> ?
> ?		if (!dereset) {
> ?			dsaf_write_sub(dsaf_dev,
> DSAF_SUB_SC_GE_RESET_REQ1_REG,

-- 

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy