* [PATCH] ARM: i.MX: Disable supervisor protect for i.MX51
@ 2016-06-25 5:26 Alexander Shiyan
2016-06-28 2:36 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Alexander Shiyan @ 2016-06-25 5:26 UTC (permalink / raw)
To: linux-arm-kernel
Most peripherals on the i.MX51 have an Off-Platform Peripheral Access
Control Register (OPACR) in which the access rights (together with the
MPROT registers) can be declared.
However, this does not seem to work for example for SSI1+SDMA, because the
supervisor bit is not set for the SDMA unit.
A similar problem was described in the patch for i.MX53 CPU
(ARM: i.MX53: globally disable supervisor protect), and the same solution
is applicable for i.MX51 CPU.
Patch has tested on custom board based on Digi CCMX-51 module (i.MX51).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
DTS-part of this patch, I'll send a bit later.
Another mention of this problem: https://community.nxp.com/thread/333710
---
arch/arm/mach-imx/mach-imx51.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index 10a82a4..1e91740 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -54,6 +54,8 @@ static void __init imx51_dt_init(void)
imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx_aips_allow_unprivileged_access("fsl,imx51-aipstz");
}
static void __init imx51_init_late(void)
--
2.4.9
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] ARM: i.MX: Disable supervisor protect for i.MX51
2016-06-25 5:26 [PATCH] ARM: i.MX: Disable supervisor protect for i.MX51 Alexander Shiyan
@ 2016-06-28 2:36 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2016-06-28 2:36 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jun 25, 2016 at 08:26:15AM +0300, Alexander Shiyan wrote:
> Most peripherals on the i.MX51 have an Off-Platform Peripheral Access
> Control Register (OPACR) in which the access rights (together with the
> MPROT registers) can be declared.
> However, this does not seem to work for example for SSI1+SDMA, because the
> supervisor bit is not set for the SDMA unit.
> A similar problem was described in the patch for i.MX53 CPU
> (ARM: i.MX53: globally disable supervisor protect), and the same solution
> is applicable for i.MX51 CPU.
> Patch has tested on custom board based on Digi CCMX-51 module (i.MX51).
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-06-28 2:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-25 5:26 [PATCH] ARM: i.MX: Disable supervisor protect for i.MX51 Alexander Shiyan
2016-06-28 2:36 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).