From: nipun.gupta@nxp.com (Nipun Gupta)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 2/2] iommu/arm-smmu: Add support for the fsl-mc bus
Date: Wed, 29 Jun 2016 22:44:08 +0530 [thread overview]
Message-ID: <1467220448-16764-2-git-send-email-nipun.gupta@nxp.com> (raw)
In-Reply-To: <1467220448-16764-1-git-send-email-nipun.gupta@nxp.com>
Implement bus specific support for the fsl-mc bus including
registering the arm_smmu_ops and bus specific smmu device init.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Bharat Bhushan <bharat.bhushan@nxp.com>
---
drivers/iommu/arm-smmu.c | 43 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index ab365ec..28d5dc8 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -47,6 +47,9 @@
#include <linux/amba/bus.h>
+/* Include path will be changed once FSL-MC support is out from staging */
+#include <../drivers/staging/fsl-mc/include/fsl_mc_smmu.h>
+
#include "io-pgtable.h"
/* Maximum number of stream IDs assigned to a single device */
@@ -447,6 +450,11 @@ static struct device_node *dev_get_dev_node(struct device *dev)
return bus->bridge->parent->of_node;
}
+ if (dev_is_fsl_mc(dev)) {
+ while (dev_is_fsl_mc(dev))
+ dev = dev->parent;
+ }
+
return dev->of_node;
}
@@ -1443,6 +1451,32 @@ static int arm_smmu_init_platform_device(struct device *dev,
return 0;
}
+static void __arm_smmu_release_fslmc_iommudata(void *data)
+{
+ kfree(data);
+}
+
+static int arm_smmu_init_fslmc_device(struct device *dev,
+ struct iommu_group *group)
+{
+ struct arm_smmu_master_cfg *cfg;
+
+ cfg = iommu_group_get_iommudata(group);
+ if (!cfg) {
+ cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ cfg->streamids[0] = fslmc_dev_streamid(dev);
+ cfg->num_streamids = 1;
+
+ iommu_group_set_iommudata(group, cfg,
+ __arm_smmu_release_fslmc_iommudata);
+ }
+
+ return 0;
+}
+
static int arm_smmu_add_device(struct device *dev)
{
struct iommu_group *group;
@@ -1467,6 +1501,8 @@ static struct iommu_group *arm_smmu_device_group(struct device *dev)
if (dev_is_pci(dev))
group = pci_device_group(dev);
+ else if (dev_is_fsl_mc(dev))
+ group = fslmc_device_group(dev);
else
group = generic_device_group(dev);
@@ -1475,6 +1511,8 @@ static struct iommu_group *arm_smmu_device_group(struct device *dev)
if (dev_is_pci(dev))
ret = arm_smmu_init_pci_device(to_pci_dev(dev), group);
+ else if (dev_is_fsl_mc(dev))
+ ret = arm_smmu_init_fslmc_device(dev, group);
else
ret = arm_smmu_init_platform_device(dev, group);
@@ -2102,6 +2140,11 @@ static int __init arm_smmu_init(void)
}
#endif
+#ifdef CONFIG_FSL_MC_BUS
+ if (!iommu_present(&fsl_mc_bus_type))
+ bus_set_iommu(&fsl_mc_bus_type, &arm_smmu_ops);
+#endif
+
return 0;
}
--
1.9.1
next prev parent reply other threads:[~2016-06-29 17:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-29 17:14 [RFC PATCH 1/2] fsl-mc: Added header file to provide fsl-mc bus iommu group creation Nipun Gupta
2016-06-29 17:14 ` Nipun Gupta [this message]
2016-06-30 11:23 ` [RFC PATCH 2/2] iommu/arm-smmu: Add support for the fsl-mc bus Robin Murphy
2016-06-30 12:11 ` Nipun Gupta
2016-06-30 10:55 ` [RFC PATCH 1/2] fsl-mc: Added header file to provide fsl-mc bus iommu group creation Robin Murphy
2016-06-30 11:43 ` Nipun Gupta
2016-06-30 14:14 ` Robin Murphy
2016-07-01 15:11 ` Nipun Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467220448-16764-2-git-send-email-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).