From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] pinctrl: qcom: add support for EBI2
Date: Fri, 1 Jul 2016 17:52:44 +0200 [thread overview]
Message-ID: <1467388364-22223-1-git-send-email-linus.walleij@linaro.org> (raw)
Add support to mux in the second external bus interface as
function 1 on pins 123 thru 158. This external bus is used on
the APQ8060 Dragonboard to connect an external SMSC9211 ethernet
adapter.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-msm8660.c | 82 +++++++++++++++++++---------------
1 file changed, 46 insertions(+), 36 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8660.c b/drivers/pinctrl/qcom/pinctrl-msm8660.c
index 3e8f7ac2ac8a..3190699b7d54 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8660.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8660.c
@@ -506,6 +506,7 @@ enum msm8660_functions {
MSM_MUX_usb_fs2_oe_n,
MSM_MUX_vfe,
MSM_MUX_vsens_alarm,
+ MSM_MUX_ebi2,
MSM_MUX__,
};
@@ -696,6 +697,14 @@ static const char * const vfe_groups[] = {
static const char * const vsens_alarm_groups[] = {
"gpio127"
};
+static const char * const ebi2_groups[] = {
+ "gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128", "gpio129",
+ "gpio130", "gpio131", "gpio132", "gpio133", "gpio134", "gpio135", "gpio136",
+ "gpio137", "gpio138", "gpio139", "gpio140", "gpio141", "gpio142", "gpio143",
+ "gpio144", "gpio145", "gpio146", "gpio147", "gpio148", "gpio149", "gpio150",
+ "gpio151", "gpio152", "gpio153", "gpio154", "gpio155", "gpio156", "gpio157",
+ "gpio158"
+};
static const struct msm_function msm8660_functions[] = {
FUNCTION(gpio),
@@ -749,6 +758,7 @@ static const struct msm_function msm8660_functions[] = {
FUNCTION(usb_fs2_oe_n),
FUNCTION(vfe),
FUNCTION(vsens_alarm),
+ FUNCTION(ebi2),
};
static const struct msm_pingroup msm8660_groups[] = {
@@ -875,42 +885,42 @@ static const struct msm_pingroup msm8660_groups[] = {
PINGROUP(120, i2s, _, _, _, _, _, _),
PINGROUP(121, i2s, _, _, _, _, _, _),
PINGROUP(122, i2s, gp_clk_1b, _, _, _, _, _),
- PINGROUP(123, _, gsbi2_spi_cs1_n, _, _, _, _, _),
- PINGROUP(124, _, gsbi2_spi_cs2_n, _, _, _, _, _),
- PINGROUP(125, _, gsbi2_spi_cs3_n, _, _, _, _, _),
- PINGROUP(126, _, _, _, _, _, _, _),
- PINGROUP(127, _, vsens_alarm, _, _, _, _, _),
- PINGROUP(128, _, _, _, _, _, _, _),
- PINGROUP(129, _, _, _, _, _, _, _),
- PINGROUP(130, _, _, _, _, _, _, _),
- PINGROUP(131, _, _, _, _, _, _, _),
- PINGROUP(132, _, _, _, _, _, _, _),
- PINGROUP(133, _, _, _, _, _, _, _),
- PINGROUP(134, _, _, _, _, _, _, _),
- PINGROUP(135, _, _, _, _, _, _, _),
- PINGROUP(136, _, _, _, _, _, _, _),
- PINGROUP(137, _, _, _, _, _, _, _),
- PINGROUP(138, _, _, _, _, _, _, _),
- PINGROUP(139, _, _, _, _, _, _, _),
- PINGROUP(140, _, _, _, _, _, _, _),
- PINGROUP(141, _, _, _, _, _, _, _),
- PINGROUP(142, _, _, _, _, _, _, _),
- PINGROUP(143, _, sdc2, _, _, _, _, _),
- PINGROUP(144, _, sdc2, _, _, _, _, _),
- PINGROUP(145, _, sdc2, _, _, _, _, _),
- PINGROUP(146, _, sdc2, _, _, _, _, _),
- PINGROUP(147, _, sdc2, _, _, _, _, _),
- PINGROUP(148, _, sdc2, _, _, _, _, _),
- PINGROUP(149, _, sdc2, _, _, _, _, _),
- PINGROUP(150, _, sdc2, _, _, _, _, _),
- PINGROUP(151, _, sdc2, _, _, _, _, _),
- PINGROUP(152, _, sdc2, _, _, _, _, _),
- PINGROUP(153, _, _, _, _, _, _, _),
- PINGROUP(154, _, _, _, _, _, _, _),
- PINGROUP(155, _, _, _, _, _, _, _),
- PINGROUP(156, _, _, _, _, _, _, _),
- PINGROUP(157, _, _, _, _, _, _, _),
- PINGROUP(158, _, _, _, _, _, _, _),
+ PINGROUP(123, ebi2, gsbi2_spi_cs1_n, _, _, _, _, _),
+ PINGROUP(124, ebi2, gsbi2_spi_cs2_n, _, _, _, _, _),
+ PINGROUP(125, ebi2, gsbi2_spi_cs3_n, _, _, _, _, _),
+ PINGROUP(126, ebi2, _, _, _, _, _, _),
+ PINGROUP(127, ebi2, vsens_alarm, _, _, _, _, _),
+ PINGROUP(128, ebi2, _, _, _, _, _, _),
+ PINGROUP(129, ebi2, _, _, _, _, _, _),
+ PINGROUP(130, ebi2, _, _, _, _, _, _),
+ PINGROUP(131, ebi2, _, _, _, _, _, _),
+ PINGROUP(132, ebi2, _, _, _, _, _, _),
+ PINGROUP(133, ebi2, _, _, _, _, _, _),
+ PINGROUP(134, ebi2, _, _, _, _, _, _),
+ PINGROUP(135, ebi2, _, _, _, _, _, _),
+ PINGROUP(136, ebi2, _, _, _, _, _, _),
+ PINGROUP(137, ebi2, _, _, _, _, _, _),
+ PINGROUP(138, ebi2, _, _, _, _, _, _),
+ PINGROUP(139, ebi2, _, _, _, _, _, _),
+ PINGROUP(140, ebi2, _, _, _, _, _, _),
+ PINGROUP(141, ebi2, _, _, _, _, _, _),
+ PINGROUP(142, ebi2, _, _, _, _, _, _),
+ PINGROUP(143, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(144, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(145, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(146, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(147, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(148, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(149, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(150, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(151, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(152, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(153, ebi2, _, _, _, _, _, _),
+ PINGROUP(154, ebi2, _, _, _, _, _, _),
+ PINGROUP(155, ebi2, _, _, _, _, _, _),
+ PINGROUP(156, ebi2, _, _, _, _, _, _),
+ PINGROUP(157, ebi2, _, _, _, _, _, _),
+ PINGROUP(158, ebi2, _, _, _, _, _, _),
PINGROUP(159, sdc1, _, _, _, _, _, _),
PINGROUP(160, sdc1, _, _, _, _, _, _),
PINGROUP(161, sdc1, _, _, _, _, _, _),
--
2.4.11
next reply other threads:[~2016-07-01 15:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-01 15:52 Linus Walleij [this message]
2016-07-01 17:35 ` [PATCH] pinctrl: qcom: add support for EBI2 Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467388364-22223-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).