From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] pinctrl: qcom: add support for EBI2
Date: Sat, 2 Jul 2016 01:56:05 +0200 [thread overview]
Message-ID: <1467417365-31681-1-git-send-email-linus.walleij@linaro.org> (raw)
Add support to mux in the second external bus interface as
follows:
- CS1 and CS2 on GPIO39 and GPIO40 as func 2
- ADDR_7 thru ADDR_0 on GPIO123 thru GPIO130 as func 1
- CS4, CS3 and CS0 on GPIO132, GPIO133, GPIO134 as func 1
- DATA_15 thru DATA_0 on GPIO135 thru GPIO150 as func 1
- OE on GPIO151 as func 1
- ADV on GPIO153 as func 1
- WE on GPIO157 as func 1
This external bus is used on the APQ8060 Dragonboard to connect
an external SMSC9211 ethernet adapter, but there are many other
usecases for the EBI2.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Pick out the exact right pin assignments from the old codebase.
---
drivers/pinctrl/qcom/pinctrl-msm8660.c | 72 +++++++++++++++++++---------------
1 file changed, 41 insertions(+), 31 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8660.c b/drivers/pinctrl/qcom/pinctrl-msm8660.c
index 3e8f7ac2ac8a..debc90101553 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8660.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8660.c
@@ -506,6 +506,7 @@ enum msm8660_functions {
MSM_MUX_usb_fs2_oe_n,
MSM_MUX_vfe,
MSM_MUX_vsens_alarm,
+ MSM_MUX_ebi2,
MSM_MUX__,
};
@@ -696,6 +697,14 @@ static const char * const vfe_groups[] = {
static const char * const vsens_alarm_groups[] = {
"gpio127"
};
+static const char * const ebi2_groups[] = {
+ "gpio39", "gpio40", "gpio123", "gpio124", "gpio125", "gpio126",
+ "gpio127", "gpio128", "gpio129", "gpio130", "gpio132", "gpio133",
+ "gpio134", "gpio135", "gpio136", "gpio137", "gpio138", "gpio139"
+ "gpio140", "gpio141", "gpio142", "gpio143", "gpio144", "gpio145",
+ "gpio146", "gpio147", "gpio148", "gpio149", "gpio150", "gpio151",
+ "gpio153", "gpio157"
+};
static const struct msm_function msm8660_functions[] = {
FUNCTION(gpio),
@@ -749,6 +758,7 @@ static const struct msm_function msm8660_functions[] = {
FUNCTION(usb_fs2_oe_n),
FUNCTION(vfe),
FUNCTION(vsens_alarm),
+ FUNCTION(ebi2),
};
static const struct msm_pingroup msm8660_groups[] = {
@@ -791,8 +801,8 @@ static const struct msm_pingroup msm8660_groups[] = {
PINGROUP(36, gsbi1, _, _, _, _, _, _),
PINGROUP(37, gsbi2, _, _, _, _, _, _),
PINGROUP(38, gsbi2, _, _, _, _, _, _),
- PINGROUP(39, gsbi2, _, mdp_vsync, _, _, _, _),
- PINGROUP(40, gsbi2, _, _, _, _, _, _),
+ PINGROUP(39, gsbi2, ebi2, mdp_vsync, _, _, _, _),
+ PINGROUP(40, gsbi2, ebi2, _, _, _, _, _),
PINGROUP(41, gsbi3, mdp_vsync, _, _, _, _, _),
PINGROUP(42, gsbi3, vfe, _, _, _, _, _),
PINGROUP(43, gsbi3, _, _, _, _, _, _),
@@ -875,41 +885,41 @@ static const struct msm_pingroup msm8660_groups[] = {
PINGROUP(120, i2s, _, _, _, _, _, _),
PINGROUP(121, i2s, _, _, _, _, _, _),
PINGROUP(122, i2s, gp_clk_1b, _, _, _, _, _),
- PINGROUP(123, _, gsbi2_spi_cs1_n, _, _, _, _, _),
- PINGROUP(124, _, gsbi2_spi_cs2_n, _, _, _, _, _),
- PINGROUP(125, _, gsbi2_spi_cs3_n, _, _, _, _, _),
- PINGROUP(126, _, _, _, _, _, _, _),
- PINGROUP(127, _, vsens_alarm, _, _, _, _, _),
- PINGROUP(128, _, _, _, _, _, _, _),
- PINGROUP(129, _, _, _, _, _, _, _),
- PINGROUP(130, _, _, _, _, _, _, _),
+ PINGROUP(123, ebi2, gsbi2_spi_cs1_n, _, _, _, _, _),
+ PINGROUP(124, ebi2, gsbi2_spi_cs2_n, _, _, _, _, _),
+ PINGROUP(125, ebi2, gsbi2_spi_cs3_n, _, _, _, _, _),
+ PINGROUP(126, ebi2, _, _, _, _, _, _),
+ PINGROUP(127, ebi2, vsens_alarm, _, _, _, _, _),
+ PINGROUP(128, ebi2, _, _, _, _, _, _),
+ PINGROUP(129, ebi2, _, _, _, _, _, _),
+ PINGROUP(130, ebi2, _, _, _, _, _, _),
PINGROUP(131, _, _, _, _, _, _, _),
- PINGROUP(132, _, _, _, _, _, _, _),
- PINGROUP(133, _, _, _, _, _, _, _),
+ PINGROUP(132, ebi2, _, _, _, _, _, _),
+ PINGROUP(133, ebi2, _, _, _, _, _, _),
PINGROUP(134, _, _, _, _, _, _, _),
- PINGROUP(135, _, _, _, _, _, _, _),
- PINGROUP(136, _, _, _, _, _, _, _),
- PINGROUP(137, _, _, _, _, _, _, _),
- PINGROUP(138, _, _, _, _, _, _, _),
- PINGROUP(139, _, _, _, _, _, _, _),
- PINGROUP(140, _, _, _, _, _, _, _),
- PINGROUP(141, _, _, _, _, _, _, _),
- PINGROUP(142, _, _, _, _, _, _, _),
- PINGROUP(143, _, sdc2, _, _, _, _, _),
- PINGROUP(144, _, sdc2, _, _, _, _, _),
- PINGROUP(145, _, sdc2, _, _, _, _, _),
- PINGROUP(146, _, sdc2, _, _, _, _, _),
- PINGROUP(147, _, sdc2, _, _, _, _, _),
- PINGROUP(148, _, sdc2, _, _, _, _, _),
- PINGROUP(149, _, sdc2, _, _, _, _, _),
- PINGROUP(150, _, sdc2, _, _, _, _, _),
- PINGROUP(151, _, sdc2, _, _, _, _, _),
+ PINGROUP(135, ebi2, _, _, _, _, _, _),
+ PINGROUP(136, ebi2, _, _, _, _, _, _),
+ PINGROUP(137, ebi2, _, _, _, _, _, _),
+ PINGROUP(138, ebi2, _, _, _, _, _, _),
+ PINGROUP(139, ebi2, _, _, _, _, _, _),
+ PINGROUP(140, ebi2, _, _, _, _, _, _),
+ PINGROUP(141, ebi2, _, _, _, _, _, _),
+ PINGROUP(142, ebi2, _, _, _, _, _, _),
+ PINGROUP(143, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(144, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(145, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(146, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(147, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(148, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(149, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(150, ebi2, sdc2, _, _, _, _, _),
+ PINGROUP(151, ebi2, sdc2, _, _, _, _, _),
PINGROUP(152, _, sdc2, _, _, _, _, _),
- PINGROUP(153, _, _, _, _, _, _, _),
+ PINGROUP(153, ebi2, _, _, _, _, _, _),
PINGROUP(154, _, _, _, _, _, _, _),
PINGROUP(155, _, _, _, _, _, _, _),
PINGROUP(156, _, _, _, _, _, _, _),
- PINGROUP(157, _, _, _, _, _, _, _),
+ PINGROUP(157, ebi2, _, _, _, _, _, _),
PINGROUP(158, _, _, _, _, _, _, _),
PINGROUP(159, sdc1, _, _, _, _, _, _),
PINGROUP(160, sdc1, _, _, _, _, _, _),
--
2.4.11
next reply other threads:[~2016-07-01 23:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-01 23:56 Linus Walleij [this message]
2016-07-02 0:07 ` [PATCH v2] pinctrl: qcom: add support for EBI2 Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467417365-31681-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).