From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Wed, 6 Jul 2016 20:36:12 -0700 Subject: [GIT PULL 1/4] Broadcom ARM devicetree changes for 4.8 (part 2) In-Reply-To: <1467862574-6522-1-git-send-email-f.fainelli@gmail.com> References: <1467862574-6522-1-git-send-email-f.fainelli@gmail.com> Message-ID: <1467862574-6522-3-git-send-email-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 2df1808dc0e2b5358e13beb95192b15200017776: ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC (2016-06-13 12:44:46 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.8/devicetree-part2 for you to fetch changes up to 9a4865d42fe50650e37061da93441133786feac2: ARM: dts: NSP: Specify RAM amount for BCM958625HR board (2016-07-06 19:42:43 -0700) ---------------------------------------------------------------- This pull request contains additional Broadcom ARM-based SoC Device Tree changes: - Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with their proper information about the on-board USB Ethernet adapter so there is appropriate binding between this USB device and a device_node (useful for MAC address fetching and stuff) - Raveendra adds the ADC controller Device Tree nodes to the Cygnus SoC device tree include files - Rafal updates the BCM5301x Device Tree by separating how we specify the NAND chip-select information in a first change and then fixes the NAND controller ECC configuration for the D-Link DIR-885L - Florian adds support for the BCM953012ER reference board, adds the HW random number generator DT node and adds proper memory node information to the BCM958625HR reference board ---------------------------------------------------------------- Florian Fainelli (4): ARM: dts: BCM5301x: Add RNG Device Tree node ARM: dts: BCM5301x: Add BCM953012ER board Merge tag 'bcm2835-dt-next-2016-07-03' into devicetree/next ARM: dts: NSP: Specify RAM amount for BCM958625HR board Lubomir Rintel (1): ARM: bcm2835: dt: Add the ethernet to the device trees Rafa? Mi?ecki (2): ARM: BCM5301X: Specify NAND chip select and ECC in separated files ARM: BCM5301X: Fix NAND ECC parameters for D-Link DIR-885L Raveendra Padasalagi (1): ARM: dts: Cygnus: Add Broadcom iproc-static-adc DT node arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm-cygnus.dtsi | 11 +++ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 +++++ arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 +++++ arch/arm/boot/dts/bcm283x.dtsi | 2 + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 2 +- arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 15 ++++ arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 16 ++-- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 18 +++++ arch/arm/boot/dts/bcm5301x.dtsi | 5 ++ arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++ arch/arm/boot/dts/bcm958625hr.dts | 4 + 16 files changed, 208 insertions(+), 12 deletions(-) create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi create mode 100644 arch/arm/boot/dts/bcm953012er.dts