From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 17/93] clocksource/drivers/cadence_ttc: Convert init function to return error
Date: Thu, 7 Jul 2016 10:00:50 +0200 [thread overview]
Message-ID: <1467878526-1238-17-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1467878526-1238-1-git-send-email-daniel.lezcano@linaro.org>
The init functions do not return any error. They behave as the following:
- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly
or
- print an error and let the caller unaware if the state of the system
Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.
Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: S?ren Brinkmann <soren.brinkmann@xilinx.com>
---
drivers/clocksource/cadence_ttc_timer.c | 76 ++++++++++++++++++++-------------
1 file changed, 47 insertions(+), 29 deletions(-)
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 9be6018..e2e7631 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -322,22 +322,22 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
return NOTIFY_DONE;
}
-static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
+static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
u32 timer_width)
{
struct ttc_timer_clocksource *ttccs;
int err;
ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
- if (WARN_ON(!ttccs))
- return;
+ if (!ttccs)
+ return -ENOMEM;
ttccs->ttc.clk = clk;
err = clk_prepare_enable(ttccs->ttc.clk);
- if (WARN_ON(err)) {
+ if (err) {
kfree(ttccs);
- return;
+ return err;
}
ttccs->ttc.freq = clk_get_rate(ttccs->ttc.clk);
@@ -345,8 +345,10 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
ttccs->ttc.clk_rate_change_nb.notifier_call =
ttc_rate_change_clocksource_cb;
ttccs->ttc.clk_rate_change_nb.next = NULL;
- if (clk_notifier_register(ttccs->ttc.clk,
- &ttccs->ttc.clk_rate_change_nb))
+
+ err = clk_notifier_register(ttccs->ttc.clk,
+ &ttccs->ttc.clk_rate_change_nb);
+ if (err)
pr_warn("Unable to register clock notifier.\n");
ttccs->ttc.base_addr = base;
@@ -368,14 +370,16 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
- if (WARN_ON(err)) {
+ if (err) {
kfree(ttccs);
- return;
+ return err;
}
ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
sched_clock_register(ttc_sched_clock_read, timer_width,
ttccs->ttc.freq / PRESCALE);
+
+ return 0;
}
static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
@@ -401,30 +405,35 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
}
}
-static void __init ttc_setup_clockevent(struct clk *clk,
- void __iomem *base, u32 irq)
+static int __init ttc_setup_clockevent(struct clk *clk,
+ void __iomem *base, u32 irq)
{
struct ttc_timer_clockevent *ttcce;
int err;
ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
- if (WARN_ON(!ttcce))
- return;
+ if (!ttcce)
+ return -ENOMEM;
ttcce->ttc.clk = clk;
err = clk_prepare_enable(ttcce->ttc.clk);
- if (WARN_ON(err)) {
+ if (err) {
kfree(ttcce);
- return;
+ return err;
}
ttcce->ttc.clk_rate_change_nb.notifier_call =
ttc_rate_change_clockevent_cb;
ttcce->ttc.clk_rate_change_nb.next = NULL;
- if (clk_notifier_register(ttcce->ttc.clk,
- &ttcce->ttc.clk_rate_change_nb))
+
+ err = clk_notifier_register(ttcce->ttc.clk,
+ &ttcce->ttc.clk_rate_change_nb);
+ if (err) {
pr_warn("Unable to register clock notifier.\n");
+ return err;
+ }
+
ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk);
ttcce->ttc.base_addr = base;
@@ -451,13 +460,15 @@ static void __init ttc_setup_clockevent(struct clk *clk,
err = request_irq(irq, ttc_clock_event_interrupt,
IRQF_TIMER, ttcce->ce.name, ttcce);
- if (WARN_ON(err)) {
+ if (err) {
kfree(ttcce);
- return;
+ return err;
}
clockevents_config_and_register(&ttcce->ce,
ttcce->ttc.freq / PRESCALE, 1, 0xfffe);
+
+ return 0;
}
/**
@@ -466,17 +477,17 @@ static void __init ttc_setup_clockevent(struct clk *clk,
* Initializes the timer hardware and register the clock source and clock event
* timers with Linux kernal timer framework
*/
-static void __init ttc_timer_init(struct device_node *timer)
+static int __init ttc_timer_init(struct device_node *timer)
{
unsigned int irq;
void __iomem *timer_baseaddr;
struct clk *clk_cs, *clk_ce;
static int initialized;
- int clksel;
+ int clksel, ret;
u32 timer_width = 16;
if (initialized)
- return;
+ return 0;
initialized = 1;
@@ -488,13 +499,13 @@ static void __init ttc_timer_init(struct device_node *timer)
timer_baseaddr = of_iomap(timer, 0);
if (!timer_baseaddr) {
pr_err("ERROR: invalid timer base address\n");
- BUG();
+ return -ENXIO;
}
irq = irq_of_parse_and_map(timer, 1);
if (irq <= 0) {
pr_err("ERROR: invalid interrupt number\n");
- BUG();
+ return -EINVAL;
}
of_property_read_u32(timer, "timer-width", &timer_width);
@@ -504,7 +515,7 @@ static void __init ttc_timer_init(struct device_node *timer)
clk_cs = of_clk_get(timer, clksel);
if (IS_ERR(clk_cs)) {
pr_err("ERROR: timer input clock not found\n");
- BUG();
+ return PTR_ERR(clk_cs);
}
clksel = readl_relaxed(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
@@ -512,13 +523,20 @@ static void __init ttc_timer_init(struct device_node *timer)
clk_ce = of_clk_get(timer, clksel);
if (IS_ERR(clk_ce)) {
pr_err("ERROR: timer input clock not found\n");
- BUG();
+ return PTR_ERR(clk_cs);
}
- ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
- ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
+ ret = ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
+ if (ret)
+ return ret;
+
+ ret = ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
+ if (ret)
+ return ret;
pr_info("%s #0@%p, irq=%d\n", timer->name, timer_baseaddr, irq);
+
+ return 0;
}
-CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(ttc, "cdns,ttc", ttc_timer_init);
--
1.9.1
next prev parent reply other threads:[~2016-07-07 8:00 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <577E0BED.3020608@linaro.org>
[not found] ` <1467878526-1238-1-git-send-email-daniel.lezcano@linaro.org>
2016-07-07 8:00 ` [PATCH 02/93] clocksource/drivers/digicolor: Fix warning of non-static function Daniel Lezcano
2016-07-07 8:00 ` [PATCH 05/93] dt-bindings: Document rk3399 rk-timer bindings Daniel Lezcano
2016-07-07 8:00 ` [PATCH 06/93] clocksource/drivers/rockchip: Add the dynamic irq flag to the timer Daniel Lezcano
2016-07-07 8:00 ` [PATCH 07/93] clocksource/drivers/rockchip: Add support for the rk3399 SoC Daniel Lezcano
2016-07-07 8:00 ` [PATCH 08/93] arm64: dts: rockchip: Add rktimer device node for rk3399 Daniel Lezcano
2016-07-07 8:00 ` [PATCH 09/93] clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer Daniel Lezcano
2016-07-07 8:00 ` [PATCH 13/93] clocksource/drivers/rockchip_timer: Convert init function to return error Daniel Lezcano
2016-07-07 8:00 ` [PATCH 14/93] clocksource/drivers/mtk_timer: " Daniel Lezcano
2016-07-07 8:00 ` [PATCH 15/93] clocksource/drivers/exynos_mct: " Daniel Lezcano
2016-07-07 8:00 ` Daniel Lezcano [this message]
2016-07-07 8:00 ` [PATCH 18/93] clocksource/drivers/st_lpc: " Daniel Lezcano
2016-07-07 8:00 ` [PATCH 20/93] clocksource/drivers/clps711x: " Daniel Lezcano
2016-07-07 8:00 ` [PATCH 21/93] clocksource/drivers/digicolor: " Daniel Lezcano
2016-07-07 8:00 ` [PATCH 22/93] clocksource/drivers/armv7m_systick: " Daniel Lezcano
2016-07-07 8:00 ` [PATCH 23/93] clocksource/drivers/bcm2835_timer: " Daniel Lezcano
2016-07-07 8:00 ` [PATCH 25/93] clocksource/drivers/clksrc-dbx500: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 28/93] clocksource/drivers/arm_global_timer: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 32/93] clocksource/drivers/meson6_timer.c: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 35/93] clocksource/drivers/mps2-timer: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 41/93] clocksource/drivers/sun4i: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 45/93] clocksource/drivers/time-efm32: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 46/93] clocksource/drivers/time-lpc32xx: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 49/93] clocksource/drivers/atlas7: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 52/93] clocksource/drivers/prima2: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 55/93] clocksource/drivers/keystone: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 57/93] clocksource/drivers/stm32: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 58/93] clocksource/drivers/sun5i: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 60/93] clocksource/drivers/u300: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 61/93] clocksource/drivers/versatile: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 63/93] clocksource/drivers/vt8500: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 68/93] clocksource/drivers/smp_twd: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 71/93] clocksource/drivers/oxnas-rps: " Daniel Lezcano
2016-07-07 8:01 ` [PATCH 72/93] clocksources: Switch back to the clksrc table Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467878526-1238-17-git-send-email-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).